We recently elevated interior tomography from its origin in computed tomography (CT) to a general tomographic principle, and proved its validity for other tomographic modalities including SPECT, MRI, and others. Here we propose “omni-tomography”, a novel concept for the grand fusion of multiple tomographic modalities for simultaneous data acquisition in a region of interest (ROI). Omni-tomography can be instrumental when physiological processes under investigation are multi-dimensional, multi-scale, multi-temporal and multi-parametric. Both preclinical and clinical studies now depend on in vivo tomography, often requiring separate evaluations by different imaging modalities. Over the past decade, two approaches have been used for multimodality fusion: Software based image registration and hybrid scanners such as PET-CT, PET-MRI, and SPECT-CT among others. While there are intrinsic limitations with both approaches, the main obstacle to the seamless fusion of multiple imaging modalities has been the bulkiness of each individual imager and the conflict of their physical (especially spatial) requirements. To address this challenge, omni-tomography is now unveiled as an emerging direction for biomedical imaging and systems biomedicine.

Tissue Optical Clearing Devices (TOCDs) have been shown to increase light transmission through mechanically compressed regions of naturally turbid biological tissues. We hypothesize that zones of high compressive strain induced by TOCD pins produce localized water displacement and reversible changes in tissue optical properties. In this paper, we demonstrate a novel combined mechanical finite element model and optical Monte Carlo model which simulates TOCD pin compression of an ex vivo porcine skin sample and modified spatial photon fluence distributions within the tissue. Results of this simulation qualitatively suggest that light transmission through the skin can be significantly affected by changes in compressed tissue geometry as well as concurrent changes in tissue optical properties. The development of a comprehensive multi-domain model of TOCD application to tissues such as skin could ultimately be used as a framework for optimizing future design of TOCDs.

We compare the accuracy of TIM-OS and MMCM in response to the recent analysis made by Fang [Biomed. Opt. Express 2, 1258 (2011)]. Our results show that the tetrahedron-based energy deposition algorithm used in TIM-OS is more accurate than the node-based energy deposition algorithm used in MMCM.

Monte Carlo (MC) simulation is widely recognized as a gold standard in biophotonics for its high accuracy. Here we analyze several issues associated with tetrahedron-based optical Monte Carlo simulation in the context of TIM-OS, MMCM, MCML, and CUDAMCML in terms of accuracy and efficiency. Our results show that TIM-OS has significant better performance in the complex geometry cases and has comparable performance with CUDAMCML in the multi-layered tissue model.

Fluorescence molecular imaging/tomography may play an important future role in preclinical research and clinical diagnostics. Time- and frequency-domain fluorescence imaging can acquire more measurement information than the continuous wave (CW) counterpart, improving the image quality of fluorescence molecular tomography. Although diffusion approximation (DA) theory has been extensively applied in optical molecular imaging, high-order photon migration models need to be further investigated to match quantitation provided by nuclear imaging. In this paper, a frequency-domain parallel adaptive finite element solver is developed with simplified spherical harmonics (SPN) approximations. To fully evaluate the performance of the SPN approximations, a fast time-resolved tetrahedron-based Monte Carlo fluorescence simulator suitable for complex heterogeneous geometries is developed using a convolution strategy to realize the simulation of the fluorescence excitation and emission. The validation results show that high-order SPN can effectively correct the modeling errors of the diffusion equation, especially when the tissues have high absorption characteristics or when high modulation frequency measurements are used. Furthermore, the parallel adaptive mesh evolution strategy improves the modeling precision and the simulation speed significantly on a realistic digital mouse phantom. This solver is a promising platform for fluorescence molecular tomography using high-order approximations to the radiative transfer equation.

Although x-ray imaging is widely used in biomedical applications, biological soft tissues have small density changes, leading to low contrast resolution for attenuation-based x-ray imaging. Over the past years, x-ray small-angle scattering was studied as a new contrast mechanism to enhance subtle structural variation within the soft tissue. In this paper, we present a detection method to extract this type of x-ray scattering data, which are also referred to as dark-field signals. The key idea is to acquire an x-ray projection multiple times with varying collimation before an x-ray detector array. The projection data acquired with a collimator of a sufficiently high collimation aspect ratio contain mainly the primary beam with little scattering, while the data acquired with an appropriately reduced collimation aspect ratio include both the primary beam and small-angle scattering signals. Then, analysis of these corresponding datasets will produce desirable dark-field signals; for example, via digitally subtraction. In the numerical experiments, the feasibility of our dark-field detection technology is demonstrated in Monte Carlo simulation. The results show that the acquired dark field signals can clearly reveal the structural information of tissues in terms of Rayleigh scattering characteristics.

We present a generalized Delta-Eddington phase function to simplify the radiative transfer equation to integral equations with respect to both photon fluence rate and flux vector. The photon fluence rate and flux can be solved from the system of integral equations. By comparing to the Monte Carlo simulation results, the solutions of the system of integral equations accurately model the photon propagation in biological tissue over a wide range of optical parameters.

We have applied the highly sensitive chemiluminescence (CL) imaging technique to investigate the in situ ROS formation in cultured monolayers of rat H9c2 cardiomyocytes. Photon emission was detected via an innovative imaging system after incubation of H9c2 cells in culture with luminol and horseradish peroxidase (HRP), suggesting constitutive formation of ROS by the cardiomyocytes. Addition of benzo(a)pyrene-1,6-quinone (BPQ) to cultured H9c2 cells resulted in a 4-5-fold increase in the formation of ROS, as detected by the CL imaging. Both constitutive and BPQ-stimulated CL responses in cultured H9c2 cells were sustained for up to 1 hour. The CL responses were completely abolished in the presence of superoxide dismutase and catalase, suggesting the primary involvement of superoxide and hydrogen peroxide (H2O2). In contrast to BPQ-mediated redox cycling, blockage of mitochondrial electron transport chain by either antimycin A or rotenone exerted marginal effects on the ROS formation by cultured H9c2 cells. Upregulation of cellular antioxidants for detoxifying both superoxide and H2O2 by 3H-1,2-dithiole-3-thione resulted in marked inhibition of both constitutive and BPQ-augmented ROS formation in cultured H9c2 cells. Taken together, we demonstrate the sensitive detection of ROS by CL imaging in cultured cardiomyocytes.

The diffusion approximation of the Boltzmann transport equation is most commonly used for describing the photon propagation in turbid media. It produces satisfactory results in weakly absorbing and highly scattering media, but the accuracy lessens with the decreasing albedo. In this paper, we presented a method to improve the accuracy of the diffusion model in strongly absorbing media by adjusting the optical parameters. Genetic algorithm-based optimization tool is used to find the optimal optical parameters. The diffusion model behaves more closely to the physical model with the actual optical parameters substituted by the optimized optical parameters. The effectiveness of the proposed technique was demonstrated by the numerical experiments using the Monte Carlo simulation data as measurements.

We describe the system design of the first bioluminescence tomography (BLT) system for parallel acquisition of multiple bioluminescent views around a mouse in a number of spectral channels simultaneously. The primary component of this BLT system is a novel mirror module and a unique mouse holder. The mirror module consists of a mounting plate and four mirrors with stages. These mirror stages are right triangular blocks symmetrically arranged and attached to the mounting plate such that the hypotenuse surfaces of the triangular blocks all make 45∘ to the plate surface. The cylindrical/polygonal mouse holder has semitransparent rainbow bands on its side surface for the acquisition of spectrally resolved data. Numerical studies and experiments are performed to demonstrate the feasibility of this system. It is shown that bioluminescent signals collected using our system can produce a similar BLT reconstruction quality while reducing the data acquisition time, as compared to the sequential data acquisition mode.