Anecdotal evidence of the involvement of alternative splicing (AS) in the regulation of protein-protein interactions has been reported by several studies. AS events have been shown to significantly occur in regions where a protein interaction domain or a short linear motif is present. Several AS variants show partial or complete loss of interface residues, suggesting that AS can play a major role in the interaction regulation by selectively targeting the protein binding sites. In the present study we performed a statistical analysis of the alternative splicing of a non-redundant dataset of human protein-protein interfaces known at molecular level to determine the importance of this way of modulation of protein-protein interactions through AS.
Using a Cochran-Mantel-Haenszel chi-square test we demonstrated that the alternative splicing-mediated partial removal of both heterodimeric and homodimeric binding sites occurs at lower frequencies than expected, and this holds true even if we consider only those isoforms whose sequence is less different from that of the canonical protein and which therefore allow to selectively regulate functional regions of the protein. On the other hand, large removals of the binding site are not significantly prevented, possibly because they are associated to drastic structural changes of the protein. The observed protection of the binding sites from AS is not preferentially directed towards putative hot spot interface residues, and is widespread to all protein functional classes.
Our findings indicate that protein-protein binding sites are generally protected from alternative splicing-mediated partial removals. However, some cases in which the binding site is selectively removed exist, and here we discuss one of them.
Alternative splicing; Protein-protein interaction; Hot spots; Protein three-dimensional structure; Disordered regions
The webPDBinder (http://pdbinder.bio.uniroma2.it/PDBinder) is a web server for the identification of small ligand-binding sites in a protein structure. webPDBinder searches a protein structure against a library of known binding sites and a collection of control non-binding pockets. The number of similarities identified with the residues in the two sets is then used to derive a propensity value for each residue of the query protein associated to the likelihood that the residue is part of a ligand binding site. The predicted binding residues can be further refined using conservation scores derived from the multiple alignment of the PFAM protein family. webPDBinder correctly identifies residues belonging to the binding site in 77% of the cases and is able to identify binding pockets starting from holo or apo structures with comparable performances. This is important for all the real world cases where the query protein has been crystallized without a ligand and is also difficult to obtain clear similarities with bound pockets from holo pocket libraries. The input is either a PDB code or a user-submitted structure. The output is a list of predicted binding pocket residues with propensity and conservation values both in text and graphical format.
Nucleos is a web server for the identification of nucleotide-binding sites in protein structures. Nucleos compares the structure of a query protein against a set of known template 3D binding sites representing nucleotide modules, namely the nucleobase, carbohydrate and phosphate. Structural features, clustering and conservation are used to filter and score the predictions. The predicted nucleotide modules are then joined to build whole nucleotide-binding sites, which are ranked by their score. The server takes as input either the PDB code of the query protein structure or a user-submitted structure in PDB format. The output of Nucleos is composed of ranked lists of predicted nucleotide-binding sites divided by nucleotide type (e.g. ATP-like). For each ranked prediction, Nucleos provides detailed information about the score, the template structure and the structural match for each nucleotide module composing the nucleotide-binding site. The predictions on the query structure and the template-binding sites can be viewed directly on the web through a graphical applet. In 98% of the cases, the modules composing correct predictions belong to proteins with no homology relationship between each other, meaning that the identification of brand-new nucleotide-binding sites is possible using information from non-homologous proteins. Nucleos is available at http://nucleos.bio.uniroma2.it/nucleos/.
Nucleotides are involved in several cellular processes, ranging from the transmission of genetic information, to energy transfer and storage. Both sequence and structure based methods have been developed to predict the location of nucleotide-binding sites in proteins. Here we propose a novel methodology that leverages the observation that nucleotide-binding sites have a modular structure. Nucleotides are composed of identifiable fragments, i.e. the phosphate, the nucleobase and the carbohydrate moieties. These fragments are bound by specific structural motifs that recur in proteins of different fold. Moreover these motifs behave as modules and are found in different combinations across fold space. Our method predicts binding sites for each nucleotide fragment by comparing a query protein with a database of templates extracted from proteins of known structure. Whenever a similarity is found the fragment bound by the template is transferred on the query protein, thus identifying a putative binding site. Predictions falling inside the surface of the protein are discarded, and the remaining ones are scored using clustering and conservation. The method is able to rank as first a correct prediction in the 48%, 48% and 68% of the analyzed proteins for the nucleobase, carbohydrate and phosphate respectively, while considering the first five predictions the performances change to 71%, 65% and 86% respectively. Furthermore we attempted to reconstruct the full structure of the binding site, starting from the predicted positions of the fragments. We calculated that in the 59% of the analyzed proteins the method ranks as first a reconstructed binding site or a part of it. Finally we tested the reliability of our method in a real world case in which it has to predict nucleotide-binding sites in unbound proteins. We analyzed proteins whose structure has been solved with and without the nucleotide and observed only little variations in the method performance.
The ability to predict immunogenic regions in selected proteins by in-silico methods has broad implications, such as allowing a quick selection of potential reagents to be used as diagnostics, vaccines, immunotherapeutics, or research tools in several branches of biological and biotechnological research. However, the prediction of antibody target sites in proteins using computational methodologies has proven to be a highly challenging task, which is likely due to the somewhat elusive nature of B-cell epitopes. This paper proposes a web-based platform for scoring potential immunological reagents based on the structures or 3D models of the proteins of interest. The method scores a protein’s peptides set, which is derived from a sliding window, based on the average solvent exposure, with a filter on the average local model quality for each peptide. The platform was validated on a custom-assembled database of 1336 experimentally determined epitopes from 106 proteins for which a reliable 3D model could be obtained through standard modeling techniques. Despite showing poor sensitivity, this method can achieve a specificity of 0.70 and a positive predictive value of 0.29 by combining these two simple parameters. These values are slightly higher than those obtained with other established sequence-based or structure-based methods that have been evaluated using the same epitopes dataset. This method is implemented in a web server called B-Pred, which is accessible at http://immuno.bio.uniroma2.it/bpred. The server contains a number of original features that allow users to perform personalized reagent searches by manipulating the sliding window’s width and sliding step, changing the exposure and model quality thresholds, and running sequential queries with different parameters. The B-Pred server should assist experimentalists in the rational selection of epitope antigens for a wide range of applications.
B-cell epitopes; immunoinformatics; bioinformatics; web server; epitope prediction
The identification of ligand binding sites is a key task in the annotation of proteins with known structure but uncharacterized function. Here we describe a knowledge-based method exploiting the observation that unrelated binding sites share small structural motifs that bind the same chemical fragments irrespective of the nature of the ligand as a whole.
PDBinder compares a query protein against a library of binding and non-binding protein surface regions derived from the PDB. The results of the comparison are used to derive a propensity value for each residue which is correlated with the likelihood that the residue is part of a ligand binding site. The method was applied to two different problems: i) the prediction of ligand binding residues and ii) the identification of which surface cleft harbours the binding site. In both cases PDBinder performed consistently better than existing methods.
PDBinder has been trained on a non-redundant set of 1356 high-quality protein-ligand complexes and tested on a set of 239 holo and apo complex pairs. We obtained an MCC of 0.313 on the holo set with a PPV of 0.413 while on the apo set we achieved an MCC of 0.271 and a PPV of 0.372.
We show that PDBinder performs better than existing methods. The good performance on the unbound proteins is extremely important for real-world applications where the location of the binding site is unknown. Moreover, since our approach is orthogonal to those used in other programs, the PDBinder propensity value can be integrated in other algorithms further increasing the final performance.
Protein phosphorylation modulates protein function in organisms at all levels of complexity. Parasites of the Leishmania genus undergo various developmental transitions in their life cycle triggered by changes in the environment. The molecular mechanisms that these organisms use to process and integrate these external cues are largely unknown. However Leishmania lacks transcription factors, therefore most regulatory processes may occur at a post-translational level and phosphorylation has recently been demonstrated to be an important player in this process. Experimental identification of phosphorylation sites is a time-consuming task. Moreover some sites could be missed due to the highly dynamic nature of this process or to difficulties in phospho-peptide enrichment.
Here we present PhosTryp, a phosphorylation site predictor specific for trypansomatids. This method uses an SVM-based approach and has been trained with recent Leishmania phosphosproteomics data. PhosTryp achieved a 17% improvement in prediction performance compared with Netphos, a non organism-specific predictor. The analysis of the peptides correctly predicted by our method but missed by Netphos demonstrates that PhosTryp captures Leishmania-specific phosphorylation features. More specifically our results show that Leishmania kinases have sequence specificities which are different from their counterparts in higher eukaryotes. Consequently we were able to propose two possible Leishmania-specific phosphorylation motifs.
We further demonstrate that this improvement in performance extends to the related trypanosomatids Trypanosoma brucei and Trypanosoma cruzi. Finally, in order to maximize the usefulness of PhosTryp, we trained a predictor combining all the peptides from L. infantum, T. brucei and T. cruzi.
Our work demonstrates that training on organism-specific data results in an improvement that extends to related species. PhosTryp is freely available at http://phostryp.bio.uniroma2.it
Phosfinder is a web server for the identification of phosphate binding sites in protein structures. Phosfinder uses a structural comparison algorithm to scan a query structure against a set of known 3D phosphate binding motifs. Whenever a structural similarity between the query protein and a phosphate binding motif is detected, the phosphate bound by the known motif is added to the protein structure thus representing a putative phosphate binding site. Predicted binding sites are then evaluated according to (i) their position with respect to the query protein solvent-excluded surface and (ii) the conservation of the binding residues in the protein family. The server accepts as input either the PDB code of the protein to be analyzed or a user-submitted structure in PDB format. All the search parameters are user modifiable. Phosfinder outputs a list of predicted binding sites with detailed information about their structural similarity with known phosphate binding motifs, and the conservation of the residues involved. A graphical applet allows the user to visualize the predicted binding sites on the query protein structure. The results on a set of 52 apo/holo structure pairs show that the performance of our method is largely unaffected by ligand-induced conformational changes. Phosfinder is available at http://phosfinder.bio.uniroma2.it.
Nearly half of known protein structures interact with phosphate-containing ligands, such as nucleotides and other cofactors. Many methods have been developed for the identification of metal ions-binding sites and some for bigger ligands such as carbohydrates, but none is yet available for the prediction of phosphate-binding sites. Here we describe Pfinder, a method that predicts binding sites for phosphate groups, both in the form of ions or as parts of other non-peptide ligands, in proteins of known structure. Pfinder uses the Query3D local structural comparison algorithm to scan a protein structure for the presence of a number of structural motifs identified for their ability to bind the phosphate chemical group. Pfinder has been tested on a data set of 52 proteins for which both the apo and holo forms were available. We obtained at least one correct prediction in 63% of the holo structures and in 62% of the apo. The ability of Pfinder to recognize a phosphate-binding site in unbound protein structures makes it an ideal tool for functional annotation and for complementing docking and drug design methods. The Pfinder program is available at http://pdbfun.uniroma2.it/pfinder.
Local structural comparison methods can be used to find structural similarities involving functional protein patches such as enzyme active sites and ligand binding sites. The outcome of such analyses is critically dependent on the representation used to describe the structure. Indeed different categories of functional sites may require the comparison program to focus on different characteristics of the protein residues. We have therefore developed superpose3D, a novel structural comparison software that lets users specify, with a powerful and flexible syntax, the structure description most suited to the requirements of their analysis. Input proteins are processed according to the user's directives and the program identifies sets of residues (or groups of atoms) that have a similar 3D position in the two structures. The advantages of using such a general purpose program are demonstrated with several examples. These test cases show that no single representation is appropriate for every analysis, hence the usefulness of having a flexible program that can be tailored to different needs. Moreover we also discuss how to interpret the results of a database screening where a known structural motif is searched against a large ensemble of structures. The software is written in C++ and is released under the open source GPL license. Superpose3D does not require any external library, runs on Linux, Mac OSX, Windows and is available at http://cbm.bio.uniroma2.it/superpose3D.
Recently, modularity has emerged as a general attribute of complex biological systems. This is probably because modular systems lend themselves readily to optimization via random mutation followed by natural selection. Although they are not traditionally considered to evolve by this process, biological ligands are also modular, being composed of recurring chemical fragments, and moreover they exhibit similarities reminiscent of mutations (e.g. the few atoms differentiating adenine and guanine). Many ligands are also promiscuous in the sense that they bind to many different protein folds. Here, we investigated whether ligand chemical modularity is reflected in an underlying modularity of binding sites across unrelated proteins. We chose nucleotides as paradigmatic ligands, because they can be described as composed of well-defined fragments (nucleobase, ribose and phosphates) and are quite abundant both in nature and in protein structure databases. We found that nucleotide-binding sites do indeed show a modular organization and are composed of fragment-specific protein structural motifs, which parallel the modular structure of their ligands. Through an analysis of the distribution of these motifs in different proteins and in different folds, we discuss the evolutionary implications of these findings and argue that the structural features we observed can arise both as a result of divergence from a common ancestor or convergent evolution.
The structural analysis of protein ligand binding sites can provide information relevant for assigning functions to unknown proteins, to guide the drug discovery process and to infer relations among distant protein folds. Previous approaches to the comparative analysis of binding pockets have usually been focused either on the ligand or the protein component. Even though several useful observations have been made with these approaches they both have limitations. In the former case the analysis is restricted to binding pockets interacting with similar ligands, while in the latter it is difficult to systematically check whether the observed structural similarities have a functional significance.
Here we propose a novel methodology that takes into account the structure of both the binding pocket and the ligand. We first look for local similarities in a set of binding pockets and then check whether the bound ligands, even if completely different, share a common fragment that can account for the presence of the structural motif. Thanks to this method we can identify structural motifs whose functional significance is explained by the presence of shared features in the interacting ligands.
The application of this method to a large dataset of binding pockets allows the identification of recurring protein motifs that bind specific ligand fragments, even in the context of molecules with a different overall structure. In addition some of these motifs are present in a high number of evolutionarily unrelated proteins.
The occurrence of very similar structural motifs brought about by different parts of non homologous proteins is often indicative of a common function. Indeed, relatively small local structures can mediate binding to a common partner, be it a protein, a nucleic acid, a cofactor or a substrate. While it is relatively easy to identify short amino acid or nucleotide sequence motifs in a given set of proteins or genes, and many methods do exist for this purpose, much more challenging is the identification of common local substructures, especially if they are formed by non consecutive residues in the sequence.
Here we describe a publicly available tool, able to identify common structural motifs shared by different non homologous proteins in an unsupervised mode. The motifs can be as short as three residues and need not to be contiguous or even present in the same order in the sequence. Users can submit a set of protein structures deemed or not to share a common function (e.g. they bind similar ligands, or share a common epitope). The server finds and lists structural motifs composed of three or more spatially well conserved residues shared by at least three of the submitted structures. The method uses a local structural comparison algorithm to identify subsets of similar amino acids between each pair of input protein chains and a clustering procedure to group similarities shared among different structure pairs.
FunClust is fast, completely sequence independent, and does not need an a priori knowledge of the motif to be found. The output consists of a list of aligned structural matches displayed in both tabular and graphical form. We show here examples of its usefulness by searching for the largest common structural motifs in test sets of non homologous proteins and showing that the identified motifs correspond to a known common functional feature.
3dLOGO is a web server for the identification and analysis of conserved protein 3D substructures. Given a set of residues in a PDB (Protein Data Bank) chain, the server detects the matching substructure(s) in a set of user-provided protein structures, generates a multiple structure alignment centered on the input substructures and highlights other residues whose structural conservation becomes evident after the defined superposition. Conserved residues are proposed to the user for highlighting functional areas, deriving refined structural motifs or building sequence patterns. Residue structural conservation can be visualized through an expressly designed Java application, 3dProLogo, which is a 3D implementation of a sequence logo. The 3dLOGO server, with related documentation, is available at http://3dlogo.uniroma2.it/
SH3-Hunter (http://cbm.bio.uniroma2.it/SH3-Hunter/) is a web server for the recognition of putative SH3 domain interaction sites on protein sequences. Given an input query consisting of one or more protein sequences, the server identifies peptides containing poly-proline binding motifs and associates them to a list of SH3 domains, in order to compose peptide–domain pairs. The server can accept a list of peptides and allows users to upload an input file in a proper format. An accurate selection of SH3 domains is available and users can also submit their own SH3 domain sequence.
SH3-Hunter evaluates which peptide–domain pair represents a possible interaction pair and produces as output a list of significant interaction sites for each query protein. Each proposed interaction site is associated to a propensity score and sensitivity and precision levels for the prediction. The server prediction capability is based on a neural network model integrating high-throughput pep-spot data with structural information extracted from known SH3-peptide complexes.
We performed an exhaustive search for local structural similarities in an ensemble of non-redundant protein functional sites. With the purpose of finding new examples of convergent evolution, we selected only those matching sites composed of structural regions whose residue order is inverted in the relative protein sequences.
A novel case of local analogy was detected between members of the ABC transporter and of the HprK/P families in their ATP binding site. This case cannot be derived by events of circular permutation since the residues of one of the region pairs are located in reverse order in the sequence of the two protein families. One of the analogous binding sites, the one identified in HprK/P, is known to also bind pyrophosphate, which is used as preferred energy source in its kinase and phosphorylase activity.
The discovery of this striking molecular similarity, also associated to a functional similarity, may help in suggesting new experiments aimed at a deeper understanding of members of the ABC transporter family known to be involved in many serious human diseases.
False occurrences of functional motifs in protein sequences can be considered as random events due solely to the sequence composition of a proteome. Here we use a numerical approach to investigate the random appearance of functional motifs with the aim of addressing biological questions such as: How are organisms protected from undesirable occurrences of motifs otherwise selected for their functionality? Has the random appearance of functional motifs in protein sequences been affected during evolution?
Here we analyse the occurrence of functional motifs in random sequences and compare it to that observed in biological proteomes; the behaviour of random motifs is also studied. Most motifs exhibit a number of false positives significantly similar to the number of times they appear in randomized proteomes (=expected number of false positives). Interestingly, about 3% of the analysed motifs show a different kind of behaviour and appear in biological proteomes less than they do in random sequences. In some of these cases, a mechanism of evolutionary negative selection is apparent; this helps to prevent unwanted functionalities which could interfere with cellular mechanisms.
Our thorough statistical and biological analysis showed that there are several mechanisms and evolutionary constraints both of which affect the appearance of functional motifs in protein sequences.
Phosphorylation is the most common protein post-translational modification. Phosphorylated residues (serine, threonine and tyrosine) play critical roles in the regulation of many cellular processes. Since the amount of data produced by screening assays is growing continuously, the development of computational tools for collecting and analysing experimental data has become a pivotal task for unravelling the complex network of interactions regulating eukaryotic cell life. Here we present Phospho3D, , a database of 3D structures of phosphorylation sites, which stores information retrieved from the phospho.ELM database and is enriched with structural information and annotations at the residue level. The database also collects the results of a large-scale structural comparison procedure providing clues for the identification of new putative phosphorylation sites.
The identification of local similarities between two protein structures can provide clues of a common function. Many different methods exist for searching for similar subsets of residues in proteins of known structure. However, the lack of functional and structural information on single residues, together with the low level of integration of this information in comparison methods, is a limitation that prevents these methods from being fully exploited in high-throughput analyses.
Here we describe Query3d, a program that is both a structural DBMS (Database Management System) and a local comparison method. The method conserves a copy of all the residues of the Protein Data Bank annotated with a variety of functional and structural information. New annotations can be easily added from a variety of methods and known databases. The algorithm makes it possible to create complex queries based on the residues' function and then to compare only subsets of the selected residues. Functional information is also essential to speed up the comparison and the analysis of the results.
With Query3d, users can easily obtain statistics on how many and which residues share certain properties in all proteins of known structure. At the same time, the method also finds their structural neighbours in the whole PDB. Programs and data can be accessed through the PdbFun web interface.
The SH3 domain family is one of the most representative and widely studied cases of so-called Peptide Recognition Modules (PRM). The polyproline II motif PxxP that generally characterizes its ligands does not reflect the complex interaction spectrum of the over 1500 different SH3 domains, and the requirement of a more refined knowledge of their specificity implies the setting up of appropriate experimental and theoretical strategies. Due to the limitations of the current technology for peptide synthesis, several experimental high-throughput approaches have been devised to elucidate protein-protein interaction mechanisms. Such approaches can rely on and take advantage of computational techniques, such as regular expressions or position specific scoring matrices (PSSMs) to pre-process entire proteomes in the search for putative SH3 targets.
In this regard, a reliable inference methodology to be used for reducing the sequence space of putative binding peptides represents a valuable support for molecular and cellular biologists.
Using as benchmark the peptide sequences obtained from in vitro binding experiments, we set up a neural network model that performs better than PSSM in the detection of SH3 domain interactors. In particular our model is more precise in its predictions, even if its performance can vary among different SH3 domains and is strongly dependent on the number of binding peptides in the benchmark.
We show that a neural network can be more effective than standard methods in SH3 domain specificity detection. Neural classifiers identify general SH3 domain binders and domain-specific interactors from a PxxP peptide population, provided that there are a sufficient proportion of true positives in the training sets. This capability can also improve peptide selection for library definition in array experiments. Further advances can be achieved, including properly encoded domain sequences and structural information as input for a global neural network.
Protein function is often dependent on subsets of solvent-exposed residues that may exist in a similar three-dimensional configuration in non homologous proteins thus having different order and/or spacing in the sequence. Hence, functional annotation by means of sequence or fold similarity is not adequate for such cases.
We describe a method for the function-related annotation of protein structures by means of the detection of local structural similarity with a library of annotated functional sites. An automatic procedure was used to annotate the function of local surface regions. Next, we employed a sequence-independent algorithm to compare exhaustively these functional patches with a larger collection of protein surface cavities. After tuning and validating the algorithm on a dataset of well annotated structures, we applied it to a list of protein structures that are classified as being of unknown function in the Protein Data Bank. By this strategy, we were able to provide functional clues to proteins that do not show any significant sequence or global structural similarity with proteins in the current databases.
This method is able to spot structural similarities associated to function-related similarities, independently on sequence or fold resemblance, therefore is a valuable tool for the functional analysis of uncharacterized proteins. Results are available at
pdbFun () is a web server for structural and functional analysis of proteins at the residue level. pdbFun gives fast access to the whole Protein Data Bank (PDB) organized as a database of annotated residues. The available data (features) range from solvent exposure to ligand binding ability, location in a protein cavity, secondary structure, residue type, sequence functional pattern, protein domain and catalytic activity. Users can select any residue subset (even including any number of PDB structures) by combining the available features. Selections can be used as probe and target in multiple structure comparison searches. For example a search could involve, as a query, all solvent-exposed, hydrophylic residues that are not in alpha-helices and are involved in nucleotide binding. Possible examples of targets are represented by another selection, a single structure or a dataset composed of many structures. The output is a list of aligned structural matches offered in tabular and also graphical format.
The SURFACE (SUrface Residues and Functions Annotated, Compared and Evaluated, URL http://cbm.bio.uniroma2.it/surface/) database is a repository of annotated and compared protein surface regions. SURFACE contains the results of a large-scale protein annotation and local structural comparison project. A non-redundant set of protein chains is used to build a database of protein surface patches, defined as putative surface functional sites. Each patch is annotated with sequence and structure-derived information about function or interaction abilities. A new procedure for structure comparison is used to perform an all-versus-all patches comparison. Selection of the results obtained with stringent parameters offers a similarity score that can be used to associate different patches and allows reliable annotation by similarity. Annotation exerted through the comparison of regions of protein surface allows the highlighting of similarities that cannot be recognized by other methods of sequence or structure comparison. A graphic representation of the surface patches, functional annotations and the structural superpositions is available through the web interface.
Multidomain proteins predominate in eukaryotic proteomes. Individual functions assigned to different sequence segments combine to create a complex function for the whole protein. While on-line resources are available for revealing globular domains in sequences, there has hitherto been no comprehensive collection of small functional sites/motifs comparable to the globular domain resources, yet these are as important for the function of multidomain proteins. Short linear peptide motifs are used for cell compartment targeting, protein–protein interaction, regulation by phosphorylation, acetylation, glycosylation and a host of other post-translational modifications. ELM, the Eukaryotic Linear Motif server at http://elm.eu.org/, is a new bioinformatics resource for investigating candidate short non-globular functional motifs in eukaryotic proteins, aiming to fill the void in bioinformatics tools. Sequence comparisons with short motifs are difficult to evaluate because the usual significance assessments are inappropriate. Therefore the server is implemented with several logical filters to eliminate false positives. Current filters are for cell compartment, globular domain clash and taxonomic range. In favourable cases, the filters can reduce the number of retained matches by an order of magnitude or more.
Relatively few protein structures are known, compared to the enormous amount of sequence data produced in the sequencing of different genomes, and relatively few
protein complexes are deposited in the PDB with respect to the great amount of
interaction data coming from high-throughput experiments (two-hybrid or affinity
purification of protein complexes and mass spectrometry). Nevertheless, we can rely
on computational techniques for the extraction of high-quality and information-rich
data from the known structures and for their spreading in the protein sequence space.
We describe here the ongoing research projects in our group: we analyse the protein
complexes stored in the PDB and, for each complex involving one domain belonging
to a family of interaction domains for which some interaction data are available, we
can calculate its probability of interaction with any protein sequence. We analyse the
structures of proteins encoding a function specified in a PROSITE pattern, which
exhibits relatively low selectivity and specificity, and build extended patterns. To
this aim, we consider residues that are well-conserved in the structure, even if their
conservation cannot easily be recognized in the sequence alignment of the proteins
holding the function. We also analyse protein surface regions and, through the
annotation of the solvent-exposed residues, we annotate protein surface patches via a
structural comparison performed with stringent parameters and independently of the
residue order in the sequence. Local surface comparison may also help in identifying
new sequence patterns, which could not be highlighted with other sequence-based