PMCC PMCC

Search tips
Search criteria

Advanced
Results 1-25 (550485)

Clipboard (0)
None

Related Articles

1.  Oxidative stress mediated cytotoxicity of biologically synthesized silver nanoparticles in human lung epithelial adenocarcinoma cell line 
Nanoscale Research Letters  2014;9(1):459.
The goal of the present study was to investigate the toxicity of biologically prepared small size of silver nanoparticles in human lung epithelial adenocarcinoma cells A549. Herein, we describe a facile method for the synthesis of silver nanoparticles by treating the supernatant from a culture of Escherichia coli with silver nitrate. The formation of silver nanoparticles was characterized using various analytical techniques. The results from UV-visible (UV-vis) spectroscopy and X-ray diffraction analysis show a characteristic strong resonance centered at 420 nm and a single crystalline nature, respectively. Fourier transform infrared spectroscopy confirmed the possible bio-molecules responsible for the reduction of silver from silver nitrate into nanoparticles. The particle size analyzer and transmission electron microscopy results suggest that silver nanoparticles are spherical in shape with an average diameter of 15 nm. The results derived from in vitro studies showed a concentration-dependent decrease in cell viability when A549 cells were exposed to silver nanoparticles. This decrease in cell viability corresponded to increased leakage of lactate dehydrogenase (LDH), increased intracellular reactive oxygen species generation (ROS), and decreased mitochondrial transmembrane potential (MTP). Furthermore, uptake and intracellular localization of silver nanoparticles were observed and were accompanied by accumulation of autophagosomes and autolysosomes in A549 cells. The results indicate that silver nanoparticles play a significant role in apoptosis. Interestingly, biologically synthesized silver nanoparticles showed more potent cytotoxicity at the concentrations tested compared to that shown by chemically synthesized silver nanoparticles. Therefore, our results demonstrated that human lung epithelial A549 cells could provide a valuable model to assess the cytotoxicity of silver nanoparticles.
doi:10.1186/1556-276X-9-459
PMCID: PMC4167841  PMID: 25242904
Adenocarcinoma cells A549; Reactive oxygen species generation (ROS); Lactate dehydrogenase (LDH); Mitochondrial transmembrane potential (MTP); Silver nanoparticles (AgNP)
2.  Structural and thermal studies of silver nanoparticles and electrical transport study of their thin films 
Nanoscale Research Letters  2011;6(1):434.
This work reports the preparation and characterization of silver nanoparticles synthesized through wet chemical solution method and of silver films deposited by dip-coating method. X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM), field emission transmission electron microscopy (FETEM), high-resolution transmission electron microscopy (HRTEM), selected area electron diffraction (SAED), and energy dispersive spectroscopy (EDX) have been used to characterize the prepared silver nanoparticles and thin film. The morphology and crystal structure of silver nanoparticles have been determined by FESEM, HRTEM, and FETEM. The average grain size of silver nanoparticles is found to be 17.5 nm. The peaks in XRD pattern are in good agreement with that of face-centered-cubic form of metallic silver. TGA/DTA results confirmed the weight loss and the exothermic reaction due to desorption of chemisorbed water. The temperature dependence of resistivity of silver thin film, determined in the temperature range of 100-300 K, exhibit semiconducting behavior of the sample. The sample shows the activated variable range hopping in the localized states near the Fermi level.
doi:10.1186/1556-276X-6-434
PMCID: PMC3211852  PMID: 21711498
Silver nanoparticles; thin film; XRD; FESEM; FETEM; Electrical properties
3.  Silver nanoparticle toxicity in Drosophila: size does matter 
Background:
Consumer nanotechnology is a growing industry. Silver nanoparticles are the most common nanomaterial added to commercially available products, so understanding the influence that size has on toxicity is integral to the safe use of these new products. This study examined the influence of silver particle size on Drosophila egg development by comparing the toxicity of both nanoscale and conventional-sized silver particles.
Methods:
The toxicity assays were conducted by exposing Drosophila eggs to particle concentrations ranging from 10 ppm to 100 ppm of silver. Size, chemistry, and agglomeration of the silver particles were evaluated using transmission electron microscopy, X-ray photoelectron spectroscopy, and dynamic light scattering.
Results:
This analysis confirmed individual silver particle sizes in the ranges of 20–30 nm, 100 nm, and 500–1200 nm, with similar chemistry. Dynamic light scattering and transmission electron microscope data also indicated agglomeration in water, with the transmission electron microscopic images showing individual particles in the correct size range, but the dynamic light scattering z-average sizes of the silver nanoparticles were 782 ± 379 nm for the 20–30 nm silver nanoparticles, 693 ± 114 nm for the 100 nm silver nanoparticles, and 508 ± 32 nm for the 500–1200 nm silver particles. Most importantly, here we show significantly more Drosophila egg toxicity when exposed to larger, nonnanometer silver particles. Upon exposure to silver nanoparticles sized 20–30 nm, Drosophila eggs did not exhibit a statistically significant (P < 0.05) decrease in their likelihood to pupate, but eggs exposed to larger silver particles (500–1200 nm) were 91% ± 18% less likely to pupate. Exposure to silver nanoparticles reduced the percentage of pupae able to emerge as adults. At 10 ppm of silver particle exposure, only 57% ± 48% of the pupae exposed to 20–30 nm silver particles became adults, whereas 89% ± 25% of the control group became adults, and 94% ± 52% and 91% ± 19% of the 500–1200 nm and 100 nm group, respectively, reached adulthood.
Conclusion:
This research provides evidence that nanoscale silver particles (<100 nm) are less toxic to Drosophila eggs than silver particles of conventional (>100 nm) size.
doi:10.2147/IJN.S16881
PMCID: PMC3044187  PMID: 21383859
Drosophila; silver; nanoparticle; toxicity
4.  A new, simple, green, and one-pot four-component synthesis of bare and poly(α,γ, L-glutamic acid)-capped silver nanoparticles 
Colloid and polymer science  2011;290(3):221-231.
A simple and green chemical method has been developed to synthesize stable bare and capped silver nanoparticles based on the reduction of silver ions by glucose and capping by poly(α,γ,L-glutamic acid) (PGA). The use of ammonia during synthesis was avoided. PGA has had a dual role in the synthesis and was used as a capping agent to make the silver nanoparticle more biocompatible and to protect the nanoparticles from agglomerating in the liquid medium. The synthesized PGA-capped silver nanoparticles in the size range 5–45 nm were stable over long periods of time, without signs of precipitation. Morphological examination has shown that the silver nanoparticles had a nearly spherical, multiply twinned structure. The effects of the reaction temperature and the reaction time during the synthesis were investigated too. The biocompatibility of the PGA-capped silver nano-particles is discussed in terms of in vitro toxicity with human intestinal Caco-2 cells. The samples were characterized by UV–Visible spectroscopy, field emission scanning electron microscopy, transmission electron microscopy, and zeta potential measurements.
doi:10.1007/s00396-011-2540-7
PMCID: PMC3779470  PMID: 24062597
Silver nanoparticles; Green method; Poly(α,γ,L-glutamic acid); Capping agent; In vitro toxicity
5.  Biosynthesis of silver nanoparticles from Schizophyllum radiatum HE 863742.1: their characterization and antimicrobial activity 
3 Biotech  2013;4(3):227-234.
Development of reliable and eco-friendly process for synthesis of silver nanoparticles is an important step in the field of application in nanotechnology. One of the options to achieve this objective is to use natural biological processes. They have an advantage over conventional methods involving chemical agents associated with environmental toxicity. This study demonstrates the extra-cellular synthesis of stable silver nanoparticles using the white rot fungus, Schizophyllum radiatum with GenBank Accession no HE 863742.1. The supernatant of the seed media obtained after separating the cells has been used for the synthesis of silver nanoparticles. The morphology and structure of synthesized silver nanoparticles were characterized using FT-IR, XRD, UV–visible spectrum of the aqueous medium containing silver ion showed a peak in the range of 420–430 nm corresponding to the Plasmon absorbance of silver nanoparticles. Scanning electron microscopy micrograph showed formation of well-dispersed silver nanoparticles in the range of 10–40 nm. The effect of different carbon sources and the time taken for formation particles and the anti-microbial activity of synthesized nanoparticles were carried and compared with silver nitrate solution and with standard streptomycin. The process of reduction being extra-cellular and fast may lead to the development of an easy bioprocess for synthesis of silver nanoparticles.
doi:10.1007/s13205-013-0138-0
PMCID: PMC4026449
White rot fungi; Silver nanoparticles; Antimicrobial activity; Scanning electron microscopy
6.  Nanometer Sized Silver Particles Embedded Silica Particles—Spray Method 
Nanoscale Research Letters  2009;4(5):452-458.
Spherical shaped, nanometer to micro meter sized silica particles were prepared in a homogeneous nature by spray technique. Silver nanoparticles were produced over the surface of the silica grains in a harmonized manner. The size of silver and silica particles was effectively controlled by the precursors and catalysts. The electrostatic repulsion among the silica spheres and the electro static attraction between silica spheres and silver particles make the synchronized structure of the synthesized particles and the morphological images are revealed by transmission electron microscope. The silver ions are reduced by sodium borohydride. Infra red spectroscopy and X-ray photoelectron spectroscopy analysis confirm the formation of silver–silica composite particles. Thermal stability of the prepared particles obtained from thermal analysis ensures its higher temperature applications. The resultant silver embedded silica particles can be easily suspended in diverse solvents and would be useful for variety of applications.
doi:10.1007/s11671-009-9269-y
PMCID: PMC2893767  PMID: 20596511
Attraction; Repulsion; Silver; Spray; Thermal
7.  Nanometer Sized Silver Particles Embedded Silica Particles—Spray Method 
Nanoscale Research Letters  2009;4(5):452-458.
Spherical shaped, nanometer to micro meter sized silica particles were prepared in a homogeneous nature by spray technique. Silver nanoparticles were produced over the surface of the silica grains in a harmonized manner. The size of silver and silica particles was effectively controlled by the precursors and catalysts. The electrostatic repulsion among the silica spheres and the electro static attraction between silica spheres and silver particles make the synchronized structure of the synthesized particles and the morphological images are revealed by transmission electron microscope. The silver ions are reduced by sodium borohydride. Infra red spectroscopy and X-ray photoelectron spectroscopy analysis confirm the formation of silver–silica composite particles. Thermal stability of the prepared particles obtained from thermal analysis ensures its higher temperature applications. The resultant silver embedded silica particles can be easily suspended in diverse solvents and would be useful for variety of applications.
doi:10.1007/s11671-009-9269-y
PMCID: PMC2893767  PMID: 20596511
Attraction; Repulsion; Silver; Spray; Thermal
8.  Synthesis of Silver Nanoparticles Using Hydroxyl Functionalized Ionic Liquids and Their Antimicrobial Activity 
We report a new one phase method for the synthesis of uniform monodisperse crystalline Ag nanoparticles in aqueous systems that has been developed by using newly synthesized mono and dihydroxylated ionic liquids and cationic surfactants based on 1,3-disubstituted imidazolium cations and halogens anions. The hydroxyl functionalized ionic liquids (HFILs) and hydroxyl functionalized cationic surfactants (HFCSs) also simultaneously acts both as the reductant and protective agent. By changing the carbon chain length, alcohol structure and anion of the 1,3-imidazolium based HFILs and HFCSs the particle size, uniform and dispersibility of nanoparticles in aqueous solvents could be controlled. Transmission electron microscopy (TEM), electron diffraction, UV-Vis and NMR, were used for characterization of HFILs, HFCSs and silver nanoparticles. TEM studies on the solution showed representative spherical silver nanoparticles with average sizes 2–8 nm, particularly 2.2 nm and 4.5 nm in size range and reasonable narrow particle size distributions (SD-standard distribution) 0.2 nm and 0.5 nm respectively. The all metal nanoparticles are single crystals with face centered cubic (fcc) structure. The silver nanoparticles surface of plasmon resonance band (λmax) around 420 nm broadened and little moved to the long wavelength region that indicating the formation of silver nanoparticles dispersion with broad absorption around infrared (IR) region. Silver complexes of these HFILs as well as different silver nanoparticles dispersions have been tested in vitro against several gram positive and gram negative bacteria and fungus. The silver nanoparticles providing environmentally friendly and high antimicrobial activity agents.
doi:10.3390/ijms9050807
PMCID: PMC2635708  PMID: 19325785
Silver nanoparticles; hydroxyl functionalized ionic liquids; hydroxyl functionalized cationic surfactants; antimicrobial activity
9.  Synthesis and antimicrobial effects of silver nanoparticles produced by chemical reduction method 
Background and the purpose of the study
The most prominent nanoparticles for medical uses are nanosilver particles which are famous for their high anti-microbial activity. Silver ion has been known as a metal ion that exhibit anti-mold, anti-microbial and anti-algal properties for a long time. In particular, it is widely used as silver nitrate aqueous solution which has disinfecting and sterilizing actions. The purpose of this study was to evaluate the antimicrobial activity as well as physical properties of the silver nanoparticles prepared by chemical reduction method.
Methods
Silver nanoparticles (NPs) were prepared by reduction of silver nitrate in the presence of a reducing agent and also poly [N-vinylpyrolidone] (PVP) as a stabilizer. Two kinds of NPs were synthesized by ethylene glycol (EG) and glucose as reducing agent. The nanostructure and particle size of silver NPs were confirmed by scanning electron microscopy (SEM) and laser particle analyzer (LPA). The formations of the silver NPs were monitored using ultraviolet- visible spectroscopy. The anti-bacterial activity of silver NPs were assessed by determination of their minimum inhibitory concentrations (MIC) against the Gram positive (Staphylococcus aureus and Staphylococcus epidermidis) as well as Gram-negative (Escherichia coli and Pseudomonas aeruginosa) bacteria.
Results and Conclusion
The silver nanoparticles were spherical with particle size between 10 to 250 nm. Analysis of the theoretical (Mie light scattering theory) and experimental results showed that the silver NPs in colloidal solution had a diameter of approximately 50 nm.
Both colloidal silver NPs showed high anti-bacterial activity against Gram positive and Gram negative bacteria. Glucose nanosilver colloids showed a shorter killing time against most of the tested bacteria which could be due to their nanostructures and uniform size distribution patterns.
PMCID: PMC3304363  PMID: 22615613
Nanoparticles; Silver; Ethylene glycol; Glucose; Colloids; Reduction method
10.  Deposition of Silver Nanoparticles on Dendrimer Functionalized Multiwalled Carbon Nanotubes: Synthesis, Characterization and Antimicrobial Activity 
The nanohybrids composed of silver nanoparticles and aromatic polyamide functionalized multiwalled carbon nanotubes (MWCNTs) is successfully synthesized and tested for their antibacterial activity against different pathogens. Prior to deposition of silver nanoparticles, acid treated MWCNTs (MWCNTs-COOH) were successively reacted with p-phenylenediamine and methylmethacrylate to form series of NH2-terminated aromatic polyamide dendrimers on the surface of MWCNTs through Michael addition and amidation. Existence of high abundance of amine groups on the surface of functionalized MWCNTs (f-MWCNTs) provided sites for formation of silver nanoparticles by the reduction of aqueous solution of AgNO3. The silver nanoparticles formed in the resulted f-MWCNTs-Ag nanohybrids were determined to be face centered cubic (fcc) symmetry. The structure and nature of f-MWCNTs and f-MWCNTs-Ag nanohybrids were characterized by UV-vis spectroscopy, Fourier transform infrared spectroscopy (FTIR), powder X-ray diffraction analysis (XRD), Raman spectroscopy and thermogravimetric analysis (TGA). The dispersion state of f-MWCNTs and immobilization of silver nanoparticles on the surface of f-MWCNTs were investigated by scanning electron microscopy (SEM) and transmission electron microscopy (TEM). Elemental composition of f-MWCNTs-Ag nanohybrids was determined by energy dispersive X-ray spectroscopy (EDS). The antimicrobial activity of f-MWCNTs-Ag nanohybrids were estimated against E. coli, P. aeruginosa and S. aureu and compared with MWCNTs-COOH and f-MWCNTs. The results indicate that functionalization of MWCNTs with aromatic polyamide dendrimers and successive deposition of Ag nanoparticles could play an important role in the enhancement of antimicrobial activity.
PMCID: PMC3145958  PMID: 21776746
Carbon Nanotubes; Silver Nanoparticles; Dendrimer; Antimicrobial Activity; Functionalization
11.  Layer-dependent morphologies of silver on n-layer graphene 
Nanoscale Research Letters  2012;7(1):618.
The distributions of sizes of silver nanoparticles that were deposited on monolayer, bilayer, and trilayer graphene films were observed. Deposition was carried out by thermal evaporation and the graphene films, placed on SiO2/Si substrates, were obtained by the mechanical splitting of graphite. Before the deposition, optical microscopy and Raman spectroscopy were utilized to identify the number of the graphene layers. After the deposition, scanning electron microscopy was used to observe the morphologies of the particles. Systematic analysis revealed that the average sizes of the nanoparticles increased with the number of graphene layers. The density of nanoparticles decreased as the number of graphene layers increased, revealing a large variation in the surface diffusion strength of nanoparticles on the different substrates. The mechanisms of formation of these layer-dependent morphologies of silver on n-layer graphene are related to the surface free energy and surface diffusion of the n-layer graphene. The effect of the substrate such as SiO2/Si was investigated by fabricating suspended graphene, and the size and density were similar to those of supported graphene. Based on a comparison of the results, the different morphologies of the silver nanoparticles on different graphene layers were theorized to be caused only by the variation of the diffusion barriers with the number of layers of graphene.
doi:10.1186/1556-276X-7-618
PMCID: PMC3507757  PMID: 23140587
Graphene; Nanoparticle growth mechanisms; Diffusion difference barriers; 68.65.Pq (graphene films); 68.70.+w (whiskers and dendrites); 78.67.Wj (optical properties of graphene)
12.  Toxicity of various silver nanoparticles compared to silver ions in Daphnia magna 
Background
To better understand the potential ecotoxicological impacts of silver nanoparticles released into freshwater environments, the Daphnia magna 48-hour immobilization test was used.
Methods
The toxicities of silver nitrate, two types of colloidal silver nanoparticles, and a suspension of silver nanoparticles were assessed and compared using standard OECD guidelines. Also, the swimming behavior and visible uptake of the nanoparticles by Daphnia were investigated and compared. The particle suspension and colloids used in the toxicity tests were well-characterized.
Results
The results obtained from the exposure studies showed that the toxicity of all the silver species tested was dose and composition dependent. Plus, the silver nanoparticle powders subsequently suspended in the exposure water were much less toxic than the previously prepared silver nanoparticle colloids, whereas the colloidal silver nanoparticles and AgNO3 were almost similar in terms of mortality. The silver nanoparticles were ingested by the Daphnia and accumulated under the carapace, on the external body surface, and connected to the appendages. All the silver species in this study caused abnormal swimming by the D. magna.
Conclusion
According to the present results, silver nanoparticles should be classified according to GHS (Globally Harmonized System of classification and labeling of chemicals) as "category acute 1" to Daphnia neonates, suggesting that the release of nanosilver into the environment should be carefully considered.
doi:10.1186/1477-3155-10-14
PMCID: PMC3344683  PMID: 22472056
Daphnia magna; Silver; Nanoparticle; Colloid; Ion; Acute toxicity
13.  Synthesis of silver nanoparticles using Dioscorea bulbifera tuber extract and evaluation of its synergistic potential in combination with antimicrobial agents 
Background
Development of an environmentally benign process for the synthesis of silver nanomaterials is an important aspect of current nanotechnology research. Among the 600 species of the genus Dioscorea, Dioscorea bulbifera has profound therapeutic applications due to its unique phytochemistry. In this paper, we report on the rapid synthesis of silver nanoparticles by reduction of aqueous Ag+ ions using D. bulbifera tuber extract.
Methods and results
Phytochemical analysis revealed that D. bulbifera tuber extract is rich in flavonoid, phenolics, reducing sugars, starch, diosgenin, ascorbic acid, and citric acid. The biosynthesis process was quite fast, and silver nanoparticles were formed within 5 hours. Ultraviolet-visible absorption spectroscopy, transmission electron microscopy, high-resolution transmission electron microscopy, energy dispersive spectroscopy, and x-ray diffraction confirmed reduction of the Ag+ ions. Varied morphology of the bioreduced silver nanoparticles included spheres, triangles, and hexagons. Optimization studies revealed that the maximum rate of synthesis could be achieved with 0.7 mM AgNO3 solution at 50°C in 5 hours. The resulting silver nanoparticles were found to possess potent antibacterial activity against both Gram-negative and Gram-positive bacteria. Beta-lactam (piperacillin) and macrolide (eryth-romycin) antibiotics showed a 3.6-fold and 3-fold increase, respectively, in combination with silver nanoparticles selectively against multidrug-resistant Acinetobacter baumannii. Notable synergy was seen between silver nanoparticles and chloramphenicol or vancomycin against Pseudomonas aeruginosa, and was supported by a 4.9-fold and 4.2-fold increase in zone diameter, respectively. Similarly, we found a maximum 11.8-fold increase in zone diameter of streptomycin when combined with silver nanoparticles against E. coli, providing strong evidence for the synergistic action of a combination of antibiotics and silver nanoparticles.
Conclusion
This is the first report on the synthesis of silver nanoparticles using D. bulbifera tuber extract followed by an estimation of its synergistic potential for enhancement of the antibacterial activity of broad spectrum antimicrobial agents.
doi:10.2147/IJN.S24793
PMCID: PMC3273981  PMID: 22334779
Dioscorea bulbifera tuber extract; silver nanoparticles; antimicrobial synergy
14.  Antimicrobial, Mechanical and Thermal Studies of Silver Particle-Loaded Polyurethane 
Silver-particle-incorporated polyurethane films were evaluated for antimicrobial activity towards two different bacteria: Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus). Distributed silver particles sourced from silver nitrate, silver lactate and preformed silver nanoparticles were mixed with polyurethane (PU) and variously characterized by field emission scanning electron microscopy (FESEM), fourier transform infra-red (FTIR) spectroscopy, X-ray diffraction (XRD) and contact angle measurement. Antibacterial activity against E.coli was confirmed for films loaded with 10% (w/w) AgNO3, 1% and 10% (w/w) Ag lactate and preformed Ag nanoparticles. All were active against S. aureus, but Ag nanoparticles loaded with PU had a minor effect. The apparent antibacterial performance of Ag lactate-loaded PU is better than other Ag ion-loaded films, revealed from the zone of inhibition study. The better performance of silver lactate-loaded PU was the likely result of a porous PU structure. FESEM and FTIR indicated direct interaction of silver with the PU backbone, and XRD patterns confirmed that face-centred cubic-type silver, representative of Ag metal, was present. Young’s modulus, tensile strength and the hardness of silver containing PU films were not adversely affected and possibly marginally increased with silver incorporation. Dynamic mechanical analysis (DMA) indicated greater thermal stability.
doi:10.3390/jfb4040358
PMCID: PMC4030929  PMID: 24956194
polyurethane; silver; antibacterial; colony forming unit (CFU); stress-strain
15.  PVP-coated, negatively charged silver nanoparticles: A multi-center study of their physicochemical characteristics, cell culture and in vivo experiments 
Summary
PVP-capped silver nanoparticles with a diameter of the metallic core of 70 nm, a hydrodynamic diameter of 120 nm and a zeta potential of −20 mV were prepared and investigated with regard to their biological activity. This review summarizes the physicochemical properties (dissolution, protein adsorption, dispersability) of these nanoparticles and the cellular consequences of the exposure of a broad range of biological test systems to this defined type of silver nanoparticles. Silver nanoparticles dissolve in water in the presence of oxygen. In addition, in biological media (i.e., in the presence of proteins) the surface of silver nanoparticles is rapidly coated by a protein corona that influences their physicochemical and biological properties including cellular uptake. Silver nanoparticles are taken up by cell-type specific endocytosis pathways as demonstrated for hMSC, primary T-cells, primary monocytes, and astrocytes. A visualization of particles inside cells is possible by X-ray microscopy, fluorescence microscopy, and combined FIB/SEM analysis. By staining organelles, their localization inside the cell can be additionally determined. While primary brain astrocytes are shown to be fairly tolerant toward silver nanoparticles, silver nanoparticles induce the formation of DNA double-strand-breaks (DSB) and lead to chromosomal aberrations and sister-chromatid exchanges in Chinese hamster fibroblast cell lines (CHO9, K1, V79B). An exposure of rats to silver nanoparticles in vivo induced a moderate pulmonary toxicity, however, only at rather high concentrations. The same was found in precision-cut lung slices of rats in which silver nanoparticles remained mainly at the tissue surface. In a human 3D triple-cell culture model consisting of three cell types (alveolar epithelial cells, macrophages, and dendritic cells), adverse effects were also only found at high silver concentrations. The silver ions that are released from silver nanoparticles may be harmful to skin with disrupted barrier (e.g., wounds) and induce oxidative stress in skin cells (HaCaT). In conclusion, the data obtained on the effects of this well-defined type of silver nanoparticles on various biological systems clearly demonstrate that cell-type specific properties as well as experimental conditions determine the biocompatibility of and the cellular responses to an exposure with silver nanoparticles.
doi:10.3762/bjnano.5.205
PMCID: PMC4222445  PMID: 25383306
aerosols; biological properties; cell biology; nanoparticles; nanotoxicology; silver
16.  Green synthesis of silver nanoparticles mediated by Pulicaria glutinosa extract 
The green synthesis of metallic nanoparticles (NPs) has attracted tremendous attention in recent years because these protocols are low cost and more environmentally friendly than standard methods of synthesis. In this article, we report a simple and eco-friendly method for the synthesis of silver NPs using an aqueous solution of Pulicaria glutinosa plant extract as a bioreductant. The as-prepared silver NPs were characterized using ultraviolet–visible spectroscopy, powder X-ray diffraction, transmission electron microscopy, energy-dispersive X-ray spectroscopy, and Fourier-transform infrared spectroscopy. Moreover, the effects of the concentration of the reductant (plant extract) and precursor solution (silver nitrate), the temperature on the morphology, and the kinetics of reaction were investigated. The results indicate that the size of the silver NPs varied as the plant extract concentration increased. The as-synthesized silver NPs were phase pure and well crystalline with a face-centered cubic structure. Further, Fourier-transform infrared spectroscopy analysis confirmed that the plant extract not only acted as a bioreductant but also functionalized the NPs’ surfaces to act as a capping ligand to stabilize them in the solvent. The developed eco-friendly method for the synthesis of NPs could prove a better substitute for the physical and chemical methods currently used to prepare metallic NPs commonly used in cosmetics, foods, and medicines.
doi:10.2147/IJN.S43309
PMCID: PMC3633585  PMID: 23620666
surface plasmon resonance; metallic nanoparticles; eco-friendly; capping ligand
17.  Biosynthesis, Antimicrobial and Cytotoxic Effect of Silver Nanoparticles Using a Novel Nocardiopsis sp. MBRC-1 
BioMed Research International  2013;2013:287638.
The biosynthesis of nanoparticles has been proposed as a cost effective environmental friendly alternative to chemical and physical methods. Microbial synthesis of nanoparticles is under exploration due to wide biomedical applications, research interest in nanotechnology and microbial biotechnology. In the present study, an ecofriendly process for the synthesis of nanoparticles using a novel Nocardiopsis sp. MBRC-1 has been attempted. We used culture supernatant of Nocardiopsis sp. MBRC-1 for the simple and cost effective green synthesis of silver nanoparticles. The reduction of silver ions occurred when silver nitrate solution was treated with the Nocardiopsis sp. MBRC-1 culture supernatant at room temperature. The nanoparticles were characterized by UV-visible, TEM, FE-SEM, EDX, FTIR, and XRD spectroscopy. The nanoparticles exhibited an absorption peak around 420 nm, a characteristic surface plasmon resonance band of silver nanoparticles. They were spherical in shape with an average particle size of 45 ± 0.15 nm. The EDX analysis showed the presence of elemental silver signal in the synthesized nanoparticles. The FTIR analysis revealed that the protein component in the form of enzyme nitrate reductase produced by the isolate in the culture supernatant may be responsible for reduction and as capping agents. The XRD spectrum showed the characteristic Bragg peaks of 1 2 3, 2 0 4, 0 4 3, 1 4 4, and 3 1 1 facets of the face centered cubic silver nanoparticles and confirms that these nanoparticles are crystalline in nature. The prepared silver nanoparticles exhibited strong antimicrobial activity against bacteria and fungi. Cytotoxicity of biosynthesized AgNPs against in vitro human cervical cancer cell line (HeLa) showed a dose-response activity. IC50 value was found to be 200 μg/mL of AgNPs against HeLa cancer cells. Further studies are needed to elucidate the toxicity and the mechanism involved with antimicrobial and anticancer activity of the synthesized AgNPs as nanomedicine.
doi:10.1155/2013/287638
PMCID: PMC3727093  PMID: 23936787
18.  Deposition of silver nanoparticles on titanium surface for antibacterial effect 
Microbial colonization on implanted devices and biofilm formation is a recurrent complication in implant surgery and may result in loss of implants. The aim of this study was to deposit silver nanoparticles on a titanium surface to obtain antibacterial properties. In the present study, we prepared a silver nanoparticle-modified titanium (Ti-nAg) surface using silanization method. The morphology and chemical components of the Ti-nAg surface were characterized by scanning electron microscopy (SEM) equipped with energy-dispersive spectroscopy (EDS). Two species of bacteria, Staphylococcus aureus and Escherichia coli, were utilized to test the antibacterial effect of the Ti-nAg treated surface. The SEM examination revealed that a small quantity of silver nanoparticles was sparsely deposited on the titanium surface. The diameter of these nanoparticles ranged from ten to several hundred nm. EDS analyses revealed that there was 4.26% of Ag present on the surface. After a 24-hour incubation, 94% of Staphylococcus aureus and over 95% of Escherichia coli had been killed on the Ti-nAg surface, and the SEM examination of anti-adhesive efficacy test showed that there were less bacteria attached to Ti-nAg surface than to a control surface of untreated Titanium. These data suggest that silver nanoparticle-modified titanium is a promising material with an antibacterial property that may be used as an implantable biomaterial.
PMCID: PMC2865021  PMID: 20463942
nano-silver; titanium; antibacterial activity; silanization method
19.  One-step green synthesis and characterization of leaf extract-mediated biocompatible silver and gold nanoparticles from Memecylon umbellatum 
In this experiment, green-synthesized silver and gold nanoparticles were produced rapidly by treating silver and gold ions with an extract of Memecylon umbellatum leaf. The reaction process was simple and easy to handle, and was monitored using ultraviolet-visible spectroscopy. The effect of the phytochemicals present in M. umbellatum, including saponins, phenolic compounds, phytosterols, and quinones, on formation of stable silver and gold nanoparticles was investigated by Fourier-transform infrared spectroscopy. The morphology and crystalline phase of the nanoparticles were determined by transmission electron microscopy and energy-dispersive x-ray spectroscopy. The results indicate that the saponins, phytosterols, and phenolic compounds present in the plant extract play a major role in formation of silver and gold nanoparticles in their respective ions in solution. The characteristics of the nanoparticles formed suggest application of silver and gold nanoparticles as chemical sensors in the future. Given the simple and eco-friendly approach for synthesis, these nanoparticles could easily be commercialized for large-scale production.
doi:10.2147/IJN.S36670
PMCID: PMC3615924  PMID: 23569372
green synthesis; phytochemicals; saponins; nanoparticles; transmission electron microscopy
20.  Chrysopogon zizanioides aqueous extract mediated synthesis, characterization of crystalline silver and gold nanoparticles for biomedical applications 
The exploitation of various plant materials for the biosynthesis of nanoparticles is considered a green technology as it does not involve any harmful chemicals. The aim of this study was to develop a simple biological method for the synthesis of silver and gold nanoparticles using Chrysopogon zizanioides. To exploit various plant materials for the biosynthesis of nanoparticles was considered a green technology. An aqueous leaf extract of C. zizanioides was used to synthesize silver and gold nanoparticles by the bioreduction of silver nitrate (AgNO3) and chloroauric acid (HAuCl4) respectively. Water-soluble organics present in the plant materials were mainly responsible for reducing silver or gold ions to nanosized Ag or Au particles. The synthesized silver and gold nanoparticles were characterized by ultraviolet (UV)-visible spectroscopy, scanning electron microscopy (SEM), energy dispersive X-ray analysis (EDAX), Fourier transform infrared spectroscopy (FTIR), and X-ray diffraction (XRD) analysis. The kinetics decline reactions of aqueous silver/gold ion with the C. zizanioides crude extract were determined by UV-visible spectroscopy. SEM analysis showed that aqueous gold ions, when exposed to the extract were reduced and resulted in the biosynthesis of gold nanoparticles in the size range 20–50 nm. This eco-friendly approach for the synthesis of nanoparticles is simple, can be scaled up for large-scale production with powerful bioactivity as demonstrated by the synthesized silver nanoparticles. The synthesized nanoparticles can have clinical use as antibacterial, antioxidant, as well as cytotoxic agents and can be used for biomedical applications.
doi:10.2147/IJN.S44076
PMCID: PMC3704452  PMID: 23861583
nanoparticles; bioreduction; SEM; silver; gold
21.  Nanosilver Particle Production Using Juglans Regia L. (Walnut) Leaf Extract 
Background
The production of nanoparticles using a biosystem is considered green chemistry. Application of plant extracts as a biological process has been proven to be suitable for synthesis of nanoparticles.
Objectives
This study designed in order to evaluate the production of silver nanoparticles using Juglans regia leaf extract and to compare the outcome of different preparation methods of plant extracts (ethanolic extract, boiling water extract and plant powder) for the generation of nanoparticles.
Materials and Methods
The reaction mixture contained the following ingredients: AgNO3 (10 mM) as the biotransformation substrate, plant extract or powder as the biocatalyst, glucose (560 mM) as the electron donor, phosphate buffer (pH = 7, 100 mM) and ethanol 70% as the solvent in the reaction mixture. The samples were taken from the reaction mixtures at different times, and the absorbance (450 nm) of the colloidal suspensions of silver nanoparticle hydrosols was recorded immediately following dilution (1:80) so as to preserve its freshness.
Results
UV-visible spectrophotometer analysis revealed that the direct application of powder of the walnut leaf was the most efficient technique. TEM (Transmission electron microscopy) micrograph obtained by using this method revealed the generation of aggregated polydisperse, quasi-spherical nanoparticles in sizes of 10-50 nm. Ethonolic extract resulted in single silver nanoparticles which were nearly monodisperse, spherical, and individual nanoparticles ranged in size from 1-5 nm. Therefore, using direct powder of Walnut created more particles but applying ethanolic extract synthesized particles with smaller dimensions and no aggregation.
Conclusions
Different preparation methods of Juglans regia influence silver nanoparticles formation.
PMCID: PMC3941878  PMID: 24624182
Silver; Nanoparticles; Biosynthesis; Plant Extract; 
22.  Gold and silver nanoparticles from Trianthema decandra: synthesis, characterization, and antimicrobial properties 
Background
There is an increasing commercial demand for nanoparticles due to their wide applicability in various markets, including medicine, catalysis, electronics, chemistry, and energy. In this report, a simple and ecofriendly chemical reaction for the synthesis of gold and silver nanoparticles from Trianthema decandra (Aizoaceae) has been developed.
Methods and results
On treatment of aqueous solutions containing chloroauric acid or silver nitrate with root extract of T. decandra, stable gold or silver nanoparticles were rapidly formed. The kinetics of reduction of gold and silver ions during the reaction was analyzed by ultraviolet-visible spectroscopy. Field emission-scanning electron microscopy showed formation of gold nanoparticles in various shapes, including spherical, cubical, triangular, and hexagonal, while silver nanoparticles were spherical. The size of the gold nanoparticles was 33–65 nm and that of the silver nanoparticles was 36–74 nm. Energy dispersive x-ray and Fourier transform infrared spectroscopy confirmed the presence of metallic gold and metallic silver in the respective nanoparticles. The antimicrobial properties of the synthesized nanoparticles were analyzed using the Kirby-Bauer method. The results show varied susceptibility of microorganisms to the gold and silver nanoparticles.
Conclusion
It is believed that phytochemicals present in T. decandra extract reduce the silver and gold ions into metallic nanoparticles. This strategy reduces the cost of production and the environmental impact. The silver and gold nanoparticles formed showed strong activity against all microorganisms tested.
doi:10.2147/IJN.S36516
PMCID: PMC3471601  PMID: 23091381
Trianthema decandra; gold; silver; nanoparticles; antimicrobial activity
23.  Surface-enhanced Raman spectra of medicines with large-scale self-assembled silver nanoparticle films based on the modified coffee ring effect 
We report here a simple and innovative method to prepare large-scale silver nanoparticle films based on the controlled coffee ring effect. It is demonstrated that the films can be used as surface-enhanced Raman scattering probes to detect low-concentration medicines. Silver nanoparticles with the average size about 70 nm were prepared by reduction of silver nitride. In our experiment, the coffee ring effect was controlled by tilting the substrates during the deposition of silver nanoparticle films. Silver nanoparticle films were spontaneously formed on the surface of silicon substrates at the temperatures about 50°C based on the solvent evaporation and the coffee ring effect. The microstructure of the films was investigated using the scanning electron microscope and atomic force microscope. The surface roughness of the films is found as small as 20 nm. Then, the films were exposed to aqueous solutions of medicine at different concentrations. A comparison with a Raman spectra measured with a conventional Raman spectrometer showed that the Raman signal can be detected in the solution with concentrations as low as 1 × 10−5 M, and the enhancement factor achieved by the silver nanoparticle film can at least reach to 1.08 × 104. Our experimental results indicate that this technique is promising in the production of large-scale silver nanoparticle films for the surface-enhanced Raman scattering. These may be utilized in biochemical and trace analytical applications.
doi:10.1186/1556-276X-9-87
PMCID: PMC3942072  PMID: 24548639
Silver nanoparticle film; Coffee ring effect; SERS
24.  Fabrication, characterization, and thermal property evaluation of silver nanofluids 
Nanoscale Research Letters  2014;9(1):645.
Silver nanoparticles were successfully prepared in two different solvents using a microwave heating technique, with various irradiation times. The silver nanoparticles were dispersed in polar liquids (distilled water and ethylene glycol) without any other reducing agent, in the presence of the stabilizer polyvinylpyrrolidone (PVP). The optical properties, thermal properties, and morphology of the synthesized silver particles were characterized using ultraviolet-visible spectroscopy, photopyroelectric technique, and transmission electron microscopy. It was found that for the both solvents, the effect of microwave irradiation was mainly on the particles distribution, rather than the size, which enabled to make stable and homogeneous silver nanofluids. The individual spherical nanostructure of self-assembled nanoparticles has been formed during microwave irradiation. Ethylene glycol solution, due to its special properties, such as high dielectric loss, high molecular weight, and high boiling point, can serve as a good solvent for microwave heating and is found to be a more suitable medium than the distilled water. A photopyroelectric technique was carried out to measure thermal diffusivity of the samples. The precision and accuracy of this technique was established by comparing the measured thermal diffusivity of the distilled water and ethylene glycol with values reported in the literature. The thermal diffusivity ratio of the silver nanofluids increased up to 1.15 and 1.25 for distilled water and ethylene glycol, respectively.
doi:10.1186/1556-276X-9-645
PMCID: PMC4256963  PMID: 25489293
Silver nanoparticles; Nanofluids; Microwave heating; Photopyroelectric; Thermal diffusivity
25.  Sunlight-induced rapid and efficient biogenic synthesis of silver nanoparticles using aqueous leaf extract of Ocimum sanctum Linn. with enhanced antibacterial activity 
Background
Nanotechnology is now regarded as a distinct field of research in modern science and technology with multifaceted areas including biomedical applications. Among the various approaches currently available for the generation of metallic nanoparticles, biogenic synthesis is of increasing demand for the purpose of green nanotechnology. Among various natural sources, plant materials are the most readily available template-directing matrix offering cost-effectiveness, eco-friendliness, and easy handling. Moreover, the inherent pharmacological potentials of these medicinal plant extracts offer added biomedical implementations of the synthesized metal nanoparticles.
Results
A robust practical method for eco-friendly synthesis of silver nanoparticles using aqueous leaf extract of Ocimum sanctum (Tulsi) as both reducing and capping agent, under the influence of direct sunlight has been developed without applying any other chemical additives. The nanoparticles were characterized with the help of UV-visible spectrophotometer and transmission electron microscopy (TEM). The prepared silver nanoparticles exhibited considerable antibacterial activity. The effects were more pronounced on non-endospore-forming Gram-positive bacteria viz., Staphylococcus aureus, Staphylococcus epidermidis, and Listeria monocytogenes than endospore-forming species Bacillus subtilis. The nanoparticles also showed prominent activity on Gram-negative human pathogenic Salmonella typhimurium, Escherichia coli, Pseudomonas aeruginosa, and plant pathogenic Pantoea ananatis. A bactericidal mode of action was observed for both Gram-positive and Gram-negative bacteria by the nanoparticles.
Conclusions
We have developed a very simple, efficient, and practical method for the synthesis of silver nanoparticles using aqueous leaf extract of O. sanctum under the influence of direct sunlight. The biosynthesis of silver nanoparticles making use of such a traditionally important medicinal plant without applying any other chemical additives, thus offers a cost-effective and environmentally benign route for their large-scale commercial production. The nanoparticles dispersed in the mother solution showed promising antibacterial efficacy.
Graphical AbstractSunlight-induced rapid and efficient biogenic synthesis of silver nanoparticles using aqueous leaf extract of Ocimum sanctum Linn. with enhanced antibacterial activity.
Electronic supplementary material
The online version of this article (doi:10.1186/s13588-014-0018-6) contains supplementary material, which is available to authorized users.
doi:10.1186/s13588-014-0018-6
PMCID: PMC4297304  PMID: 25621198
Silver nanoparticles; Ocimum sanctum; Sunlight; Antibacterial activity; Mode of action; Nanomedicine

Results 1-25 (550485)