Search tips
Search criteria 


Logo of scirepAboutEditorial BoardFor AuthorsScientific Reports
Sci Rep. 2017; 7: 45303.
Published online 2017 April 18. doi:  10.1038/srep45303
PMCID: PMC5394689

The E. coli molecular phenotype under different growth conditions


Modern systems biology requires extensive, carefully curated measurements of cellular components in response to different environmental conditions. While high-throughput methods have made transcriptomics and proteomics datasets widely accessible and relatively economical to generate, systematic measurements of both mRNA and protein abundances under a wide range of different conditions are still relatively rare. Here we present a detailed, genome-wide transcriptomics and proteomics dataset of E. coli grown under 34 different conditions. Additionally, we provide measurements of doubling times and in-vivo metabolic fluxes through the central carbon metabolism. We manipulate concentrations of sodium and magnesium in the growth media, and we consider four different carbon sources glucose, gluconate, lactate, and glycerol. Moreover, samples are taken both in exponential and stationary phase, and we include two extensive time-courses, with multiple samples taken between 3 hours and 2 weeks. We find that exponential-phase samples systematically differ from stationary-phase samples, in particular at the level of mRNA. Regulatory responses to different carbon sources or salt stresses are more moderate, but we find numerous differentially expressed genes for growth on gluconate and under salt and magnesium stress. Our data set provides a rich resource for future computational modeling of E. coli gene regulation, transcription, and translation.

A goal of systems biology has been to understand how phenotype originates from genotype. The phenotype of a cell is determined by complex regulation of metabolism, gene expression, and cell signaling. Understanding the connection between phenotype and genotype is crucial to understanding disease and for engineering biology1. Computational models are particularly well suited to studying this problem, as they can synthesize and organize diverse and complex data in a predictive framework, but detailed experimental studies including many samples are needed to understand interactions between different types of omics data2. Much effort is currently being spent on understanding how to best integrate information collected about multiple cellular subsystems that is derived from different types of high-throughput measurements. For example, there are many proposed approaches for relating gene expression and protein abundances, focusing on integrative, whole-cell models2,3,4,5.

Given the growing interest in integrative modeling approaches, there is a pressing need for high quality genome-scale data that is comparable across cellular subsystems and reflects many different external conditions. E. coli is an ideal organism to study genome-wide, multi-level regulatory effects of external conditions, since it is well adapted to the laboratory environment6 and was one of the first organisms studied at the whole-genome level7. There have been a number of studies of the E. coli transcriptome and/or proteome in response to different growth conditions. For example, in cells growing at high density, expression of most amino acid biosynthesis genes is down-regulated and expression of chaperones is up-regulated, suggesting stresses that these cells experience8. Exposure of E. coli to reduced temperature leads to changes in gene-expression patterns consistent with reduced metabolism and growth9. Under long-term glucose starvation, mRNAs are generally down-regulated while the protein response is more varied10. Specifically, the copy numbers of proteins involved in energy-intensive processes decline whereas those of proteins involved in nutrient metabolism remain constant, likely to provide the cell with the ability to jump-start metabolism when nutrients become available again. A few other larger-scale studies have measured mRNA and/or protein abundances under multiple conditions11,12,13,14.

Here, we provide a systematic analysis of E. coli gene expression under a wide variety of different conditions. We measure both mRNA and protein abundances, at exponential and stationary phases, for growth conditions including different carbon sources and different salt stresses. We find that mRNAs and proteins display divergent responses to the different growth conditions. Further, growth phase yields more systematic differences in gene expression than does either carbon source or salt stress, though this effect is more pronounced in mRNAs than in proteins. We expect that our data set will provide a rich resource for future modeling work.


Experimental design and data collection

We grew multiple cultures of E. coli REL606, from the same stock, under a variety of different growth conditions. We measured RNA abundances under all conditions and matching protein abundances for approximately 2/3 of the conditions (Fig. 1 and Supplementary Table S1). We also measured central metabolic fluxes for a subset of conditions using glucose as carbon source. Results from one of these conditions, long-term glucose starvation, have been presented previously10. Conditions not previously described include one additional starvation experiment, using glycerol instead of glucose as carbon source, exponential and stationary phase cultures using either gluconate or lactate as carbon source, and conditions varying Mg2+ and Na+ concentrations.

Figure 1
Experimental setup.

Measurements of RNA and protein abundances were carried out as previously described10. All resulting data sets were checked for quality, normalized, and log-transformed. Our final data set consisted of 152 RNA samples, 105 protein samples, and 65 flux samples (Supplementary Table S1). 59 of the flux samples are associated with high Mg2+ and high Na+ experiments.

Our raw RNA-seq and protein data covers 4196 distinct mRNAs and proteins, and our flux data covers 13 different metabolic reactions. All raw data files are available in appropriate repositories (see Methods for details), and final processed data are available as Supplementary Tables S2, S3 and S4.

Finally, we measured doubling times in exponential phase for all experimental conditions (Supplementary Table S5). We found that doubling times varied between 50 and 100 minutes among the various conditions (Fig. 2). Growth was the fastest when glucose was used as carbon source and the slowest when the carbon source was lactose. Growth was also reduced for high Na+ concentrations and very high or low Mg2+ concentrations. Surprisingly, we found a broad range of Mg2+ concentrations (0.02 mM to 200 mM) in which growth rate remained virtually unchanged (Fig. 2).

Figure 2
Doubling times under various growth conditions.

Broad trends of gene expression differ between mRNA and proteins

To identify broad trends of gene expression among the different growth conditions, we performed hierarchical clustering on both mRNA and protein abundances (Figs 3 and and4).4). For mRNA, we found that differences in gene expression were primarily driven by the growth phase (exponential vs. stationary/late stationary). Nearly all exponential samples clustered together in one group, separate from the vast majority of stationary and late-stationary samples (Fig. 3). Mg2+ levels, Na+ levels, and carbon source had less influence on the clustering results. Results were different for protein abundances (Fig. 4), where growth phase had little effect on the clustering and instead samples seemed to group together by Na+ levels and carbon source.

Figure 3
Clustering of mRNA abundances.
Figure 4
Clustering of protein abundances.

To quantify the clustering patterns of mRNA and protein abundances, we defined a metric that measured how strongly clustered a given variable of the growth environment (growth phase, Mg2+ level, Na+ level, carbon source) was relative to the random expectation of no clustering. For each variable, we calculated the mean cophenetic distance between all pairs corresponding to the same condition (e.g., for growth phase, all pairs sampled at exponential phase and all pairs sampled at stationary/late stationary phase). The cophenetic distance is defined as the height of the dendrogram produced by the hierarchical clustering from the two selected leafs to the point where the two branches merge, and it is widely used to quantify how closely related any two leafs are in a clustering dendogram15,16. We generated null distributions of cophenetic distances under the assumption of no clustering by resampling mean cophenetic distances from dendograms with reshuffled leaf assignments, and we then converted each observed mean cophenetic distance into a z-score using the mean and variance of the corresponding null distribution. Thus, we carried out a non-parametric, random permutation test where we determined the null-distribution of our test statistic by resampling. A z-score below −1.96 indicates that the mRNA or protein abundances are clustered significantly by the corresponding variable.

We found that mRNA abundances were significantly clustered by growth phase, with a z-score of −30.98, and by Mg2+ level, with a z-score of −3.21 (Table 1). The z-scores for Na+ level and carbon source were −1.89 and 1.21, respectively, which are not significantly different from zero. Moreover, when we calculated a z-score for batch number, we found that batch effects did not significantly influenced mRNA abundances, with z = −1.43. Batch numbers represent cultures grown at the same time, in parallel.

Table 1
Clustering of mRNA and protein abundances by different growth conditions.

For protein abundances, the variable carbon source was significantly clustered, with a z-score of −2.79, and the other variables Na+ levels, growth phase, and Mg2+ levels were not significantly clustered, with z scores of −1.74, −1.27, and −0.5, respectively (Table 1). Batch number had a z-score of −20.54, which implies that there were strong batch effects present in the protein data. In general, batch effects may represent fluctuations in incubator temperatures, slight differences in growth medium composition or water quality, effects of reviving the initial inoculum of cells, or effects of sample preparation and analysis, among other possibilities. Here, since batch effects were so pronounced in the proteomics data and not in the mRNA data, we suspect that they were primarily caused by proteomics sample preparation and analysis.

In summary, mRNA abundances were clustered by growth phase and Mg2+ levels, whereas protein abundances were clustered by carbon source. Protein abundances were also strongly influenced by batch effects, unlike the mRNA data (Table 1, Supplementary Table S6 and S7).

Identification of differentially expressed genes

We next asked under which conditions and to what extent RNA and protein expression were altered. To identify differentially expressed mRNAs and proteins, we used DESeq217. Since a detailed comparison of exponential vs. stationary phase has been published previously for the glucose time-course experiment10, here we focused on differences among ion concentrations or carbon sources within either exponential or stationary phase.

For each growth phase, we defined the base level reference condition to be growth in glucose with 5 mM Na+ and 0.8 mM Mg2+. This is the baseline formulation of media used in the glucose time-course samples10. We then compared RNA and protein abundances between this reference condition and the alternative conditions (different carbon sources, elevated Na+, and elevated or reduced Mg2+) separately for each growth phase (Supplementary Table S8).

We defined significantly differentially expressed genes as those whose abundance had at least a two-fold change (log2 fold change >1) between the reference condition and a chosen experimental condition, at a false-discovery-rate (FDR) corrected P value < 0.05. We found that the number of significantly differentially expressed mRNAs and proteins varied substantially between exponential and stationary phase and between mRNAs and proteins (Fig. 5 and Supplementary Table S9). In general, there were fewer differentially expressed genes in stationary phase than in exponential phase. Further, protein abundances showed the most differential regulation for high Na+ and for the carbon sources glycerol and lactate, whereas mRNA showed the most differential regulation for high Na+ levels in stationary phase, and for low Mg2+ levels and for the carbon sources glycerol and lactate in exponential phase (Fig. 5).

Figure 5
Number of differentially expressed genes under different conditions.

Next, we asked how much overlap there was among differentially expressed genes between the various growth conditions. To simplify this analysis, we did not distinguish between up- or down-regulated genes, and we combined low and high Mg2+ into one group “Mg stress” and glycerol, lactate, and gluconate into one group “carbon source”. (Note that differentially expressed genes were still identified for individual conditions, as described above, and were combined into “Mg stress” and “carbon source” only for the final comparison). At the mRNA level, there was some overlap (21.7%) between carbon source and Mg2+ stress in exponential phase. All other overlaps where minimal, ~5% or less (Fig. 6). At the protein level, there was overlap between Na+ stress and carbon source (15.6% in exponential phase, 10.7% in stationary phase), while all other overlaps were also minimal, ~5% or less (Fig. 6).

Figure 6
Overlap of differentially expressed genes among conditions.

We also identified significantly altered biological pathways and molecular activities of gene products (Supplementary Table S10). We used the Kyoto Encyclopedia of Genes and Genomes (KEGG)18 for biological pathways and annotations from the Gene Ontology (GO) Consortium for molecular functions19. Figure 7 and Supplementary Figure 1 show the top 5 significantly altered biological pathways (as defined in the KEGG database) and molecular functions (as defined by GO annotations) under different conditions, respectively, as determined by DAVID20. In all cases, we used a cutoff of 0.05 on false-discovery-rate (FDR)-corrected P values to identify significant annotations. We found numerous significantly altered KEGG pathways (Fig. 7) molecular functions (Supplementary Figure S1).

Figure 7
Significantly differentially expressed KEGG pathways.

In addition to identifying altered pathways and molecular activities, we identified the individual, most highly differentially expressed genes associated with specific pathways and/or functions (Supplementary Figures S2–S33). As an example, the differentially expressed mRNAs associated with significantly altered KEGG pathways under high Mg2+ concentrations in exponential phase are shown in Fig. 8A. Three pathways are significantly altered; sulfur metabolism and nitrogen metabolism are mostly up-regulated and flagellar assembly is mostly down-regulated. Changes in sulfur metabolism in this condition might reflect a linked increased in the concentration of sulfate (SO42−), as this was the counterion in the salt that was added to increase Mg2+ levels. By contrast, using lactate instead of glucose as carbon source caused up-regulation of pyruvate metabolism, citrate cycle, and carbon metabolism at the protein level in exponential phase (Fig. 8B).

Figure 8
Examples of significantly differentially expressed KEGG pathways and associated genes.

Finally, we asked to what extent differentially expressed genes might be determined by bacterial growth rate, as measured by doubling time. We repeated our DeSeq2 analyses but included in our design formula a term representing the doubling time (see Methods). We found that in general, differences in these analyses are small; the most significantly changed genes when not controlling for doubling time are the most significantly changed genes when controlling for doubling time (Supplementary Table S9). One major exception were protein abundances in response to different carbon sources. In this scenario, many new genes appeared when controlling for doubling time, both in terms of the relative proportion of genes found and in terms of absolute numbers (Supplementary Figure S34, Supplementary Table S11). We identified the significantly altered pathways associated specifically with those genes, and we found that the top hits were related to biosynthesis in both exponential and stationary growth phases (Supplementary Table 12).

Metabolic flux ratios under salt stress

For the high sodium and high magnesium experiments, we also determined metabolic fluxes through central metabolism by analyzing 13C incorporation into protein-bound amino acids. We here analyzed only flux samples taken in exponential phase, since stationary-phase samples have an unclear interpretation10. For each condition, flux samples were analyzed in triplicate (except one, which was analyzed in duplicate only), and 13 different flux ratios were measured for each sample. The flux ratios were then averaged across replicates (Supplementary Figure S35). We saw no significant changes in flux ratios with increasing Na+ (linear regression, all P > 0.05 after FDR correction, Supplementary Table S13). Results were similar for Mg2+. Due to the wide range of Mg2+ concentrations considered, we regressed flux ratios against log-transformed Mg2+ concentrations. Again, we saw no significant changes in any flux ratio with increasing Mg2+ (linear regression, all P > 0.05 after FDR correction, Supplementary Table S13).

We also asked whether the flux ratios changed with doubling time rather than with ion concentration, since doubling time is not necessarily monotonic in ion concentration (Fig. 2B). For this analysis, we pooled all flux measurements and plotted flux ratios against doubling times (Fig. 9). Again, we saw no significant relationship between flux ratios and doubling time after FDR correction (Supplementary Table S14). However, we note that the branches erythrose-4-phosphate from pentose-5-phosphate and pyruvate from malate (upper bound) showed a significant relationship before correction for multiple testing (P = 0.026 and P = 0.018, respectively, Supplementary Table S14), both driven by one outlying data point for the slowest-growing condition, at 300 mM Na+.

Figure 9
Flux ratios versus doubling times.


We studied the regulatory response of E. coli under a wide variety of different growth conditions. The experimental conditions we considered include four different carbon sources, different levels of Na+ and Mg2+ stress, and growth into deep stationary phase, up to two weeks post inoculation. We found that gene regulation changes the most with respect to growth phase; in general, the exponential phase under one condition is more similar to the exponential phase under another condition than to the stationary phase under the same condition. Further, we found little overlap in differentially expressed genes under different growth conditions. Finally, we found that the ratios of fluxes through alternative branches within central metabolism remained approximately constant under salt stress, despite substantial changes in doubling times.

Our data provides a comprehensive picture of E. coli in terms of number, range, and depth of different stresses, comparable and complementary to other recently published datasets. For example, Schmidt et al.12 considered 22 unique conditions and measured abundances of >2300 proteins. mRNA abundances were not measured. Soufi et al.11 considered 10 unique conditions and also measured abundances of >2300 proteins. They were interested primarily in up- and down-regulated proteins under different ethanol stresses, and they found down-regulation of genes associated with ribosomes and protein biosynthesis during ethanol stress. Such genes were similarly down-regulated in our study during stress induced by high Na+ concentrations. Lewis et al.13 considered only 3 different carbon sources but measured mRNA and protein abundances in different strains adapted to these growth conditions. Finally, Lewis et al.14 compiled a database of 213 mRNA expression profiles covering 70 unique conditions, including different carbon sources, terminal electron acceptor, growth phase, and genotype. In comparison, we considered 34 unique conditions, measured 152 mRNA expression profiles, 105 protein expression profiles, and 59 flux profiles, and used the exact same E. coli genotype throughout.

Similar to our prior study10, we observed clear trends in the differential expression of mRNAs and proteins. In particular, we had reported previously10 that mRNAs are widely down-regulated in stationary phase whereas only select proteins are down-regulated. Consistent with that observation, we found here that mRNAs were significantly and strongly clustered by growth phase (z = −30.98) whereas proteins were not (z = −1.27). By contrast, at the protein level we saw significant clustering by carbon source (z = −2.79), which we did not see at the mRNA level. More specifically, we had found earlier10 that energy-intensive processes were down-regulated and stress-response proteins up-regulated in stationary phase. Similarly, we observed here that high Na+ stress conditions also led to the down-regulation of energy-intensive processes.

A number of genes and pathways that we found to be influenced by treatment conditions are consistent with prior knowledge from the literature. For instance, we found that increasing the concentration of Na+ and Mg2+ decreased transcription of the flagellar genes during exponential growth, as seen previously21. We also found that high concentrations of Mg2+ induce an increase in mRNA expression of sulfur and nitrogen transport proteins, and an increase in the enzymes necessary to produce the siderophore enterobactin (necessary for obtaining iron from the environment). These regulatory changes could be due to the high Mg2+ concentrations interfering with the bacterial membrane potential, and thereby inhibiting cotransporters that are coupled to this gradient. This effect has been previously described for iron22. High Na+ concentrations also significantly reduced the expression of a large number of proteins, mostly either involved in the biosynthesis of amino acids or components of the ribosome. These changes may simply reflect stress induced by the high Na+ concentrations used in these experiments.

Altering the carbon source, as well, provided predictable changes in gene expression. For instance, providing glycerol as the sole carbon source instead of glucose increases expression of glpX, part of the glp operon, which is involved in glycerol uptake23. Gluconate as a carbon source increases expression of genes from the gnt and idn operons, both involved in gluconate metabolism24,25. Finally, using lactate as a carbon source induces the expression of lldD (lctD), a gene required for lactate utilization in E. coli26.

Large-scale, high-throughput gene-expression studies are frequently confounded by batch effects that can give rise to incorrect conclusions if they are not accounted for27. We saw such effects in our study as well. In our data, the batch number indicates bacterial samples that were grown at the same time. Not unexpectedly, our data showed significant clustering by batch number in the protein data, though not in the mRNA data (z scores of −20.54 and −1.43, respectively). Batch effects are not inherently a problem, as long as one is aware of their existence and analyzes data accordingly. Here, in our differential expression analysis, we corrected for batch effects by including batch as a distinct variable in the DESeq model (see Methods), as recommended by the DeSeq2 manual28. How to best correct for batch effects is a topic of ongoing investigations, and increasingly sophisticated methods are being developed to separate batch effects from real signal29,30,31,32. In particular, a recently developed semi-supervised normalization pipeline could be used to further investigate batch effects in this and other datasets33.

Given the many cellular changes observed in mRNA and protein levels, we turned to 13C labeling techniques10,34,35 to examine the extent to which these changes affected the relative flux of metabolites through different central metabolic pathway branch points during exponential growth. For this work, we concentrated upon growth on glucose during Na+ and Mg2+ stresses. Across these conditions, growth rates change over nearly a two-fold range, with the doubling time changing from approximately 50 to 95 minutes. In particular, both high Na+ and high Mg2+ levels reduced growth by a third. Despite this substantial effect on growth, we observed no significant changes in the relative flux through different reactions in central metabolism. The only exception was a potential decrease in pentose-5-phosphate pathway use and increase in flow through malic enzyme at 300 mM Na+. The general picture, however, was that homeostasis in central metabolism was sufficient to ward off significant changes in relative pathway use despite large changes in overall growth rate and the pools of mRNA and proteins.

In summary, our study provides a large and comprehensive dataset for investigating the gene-regulatory response of E. coli under different growth conditions, both at the mRNA and the protein level. We found systematic differences in gene-expression response between exponential and stationary phase, and between mRNAs and proteins. Our dataset provides a rich resource for future modeling of E. coli metabolism.

Materials and Methods

Our experimental approach was identical to the one used in our prior work on glucose starvation10. In particular, growth and harvesting of E. coli B REL606 cell pellets for the multiomic analysis was performed as previously described10. Similarly, after sample collection, RNA-seq, mass-spec proteomics, and metabolic flux analysis were performed as previously described10. For completeness, we here reproduce our complete protocol.

Cell Growth

E. coli B REL606 was inoculated from a freezer stock into 10 ml of Davis Minimal medium supplemented with 2 μg/l thiamine (DM)36 and limiting glucose at 500 mg/l (DM500) in a 50 ml Erlenmeyer flask. This culture was incubated at 37 °C with 120 r.p.m. orbital shaking over a diameter of 1”. After overnight growth, 500 μl of the culture was diluted into 50 ml of prewarmed DM500 in a 250 ml flask and grown for an additional 24 h under the same conditions. On the day of the experiment, 500 μl of this preconditioned culture was added to ten 250 ml flasks, each containing 50 ml DM500, to initiate the experiment. At each time point, aliquots of these cultures were removed as necessary to harvest a constant number of cells given the changes in cell density over the growth curve. Each sample was pelleted by centrifugation, washed with sterile saline (0.85% (w/v) NaCl), and then spun down again. After removing the supernatant, the resulting cell pellet was flash frozen using liquid nitrogen and stored at −80 °C. Each of the three biological replicates was performed on a separate day. Samples for each type of cell composition measurement were taken from the same batch of flasks, except for those used for flux analysis, which were grown separately in [U-13C] glucose.

For tests of different carbon sources, the Davis Minimal (DM) medium used was supplemented with 0.5 g/L of the specified compound (glycerol, lactate, or gluconate) instead of glucose. Mg2+ concentrations were varied by changing the amount of MgSO4 added to DM media from the concentration of 0.83 mM that is normally present. For tests of different Na+ concentrations, NaCl was added to achieve the final concentration. The base recipe for DM already contains ~5 mM Na+ due to the inclusion of sodium citrate, so 95 mM NaCl was added for the 100 mM Na+ condition, for example. Exponential-phase samples were taken during growth when the OD600 reached 20–60% of the maximum achieved after saturating growth. Stationary phase samples were collected 20–24 hours after the corresponding exponential sample. The exact sampling times for each condition are provided in Supplementary Table S1.

For OD600 measurements, cultures were grown separately from the main batches used for harvesting cells but under identical conditions. The OD600 (absorbance at 600 nm) of a sample removed from the culture at each time point was measured relative to a sterile DM500 glucose blank. Doubling times were estimated from these OD600 measurements. Specifically, the logarithms of all OD600 values in the exponential part of each growth curve, defined as when OD600 values were between 0.05 and 0.75 times the maximum observed OD600 at stationary phase, were fit to a linear model with respect to time. Doubling times were calculated as loge2 divided by the fit slope for each biological replicate separately. Means and confidence intervals were calculated from three replicate growth curves for all conditions except for gluconate and lactate, which had measurements for only two replicates.


Total RNA was isolated from cell pellets using the RNAsnap method37. After extraction, RNA was ethanol precipitated and resuspended in 100 μl H2O. Each sample was then DNase treated and purified using the on-column method for the Zymo Clean & Concentrator-25 (Zymo Research). RNA concentrations were determined throughout the purification procedure using a Qubit 2.0 fluorometer (Life Technologies). DNase-treated total RNA (≤5 μg) was then processed with the Gram-negative bacteria RiboZero rRNA removal kit (Epicentre). After rRNA depletion, each sample was ethanol precipitated and resuspended in H2O again. A fraction of the RNA was then fragmented to ~250 bp using the NEBNext Magnesium RNA Fragmentation Module (New England Biolabs). After fragmentation, RNA was ethanol precipitated, resuspended in 20 μl H2O, and phosphorylated using T4 polynucleotide kinase (New England Biolabs). After another ethanol precipitation cleanup step, sequencing library preparation was performed using the Multiplex Compatible NEBNext Small RNA Library Prep Set for Illumina (New England Biolabs). Samples were ethanol precipitated again after library preparation and separated on a 4% agarose gel. All DNA fragments greater than 100 bp were excised from the gel and isolated using the Zymoclean Gel DNA Recovery kit (Zymo Research). Libraries were sequenced using an Illumina HiSeq 2500 at the Genomic Sequencing and Analysis Facility (GSAF) at the University of Texas at Austin to generate 2 × 101-base paired-end reads.

For RNA-seq analysis, we implemented a custom analysis pipeline using the REL606 Escherichia coli B genome (GenBank:NC_012967.1) as the reference sequence38. We updated annotations of sRNAs in this genome sequence using the Rfam 11.0 database39. Prior to mapping, we trimmed adapter sequences from Illumina reads using Flexbar 2.3140. Mapping was carried out in single-end mode using Bowtie2 2.2.5 with the −k 1 option to achieve one unique mapping location per read41. The raw number of reads mapping to each gene were counted using HTSeq 0.6.042. Exact details for the full computational pipeline are available at


E. coli cell pellets were resuspended in 50 mM Tris-HCl pH 8.0, 10 mM DTT. 2,2,2-trifluoroethanol (Sigma) was added to 50% (v/v) final concentration and samples were incubated at 56 °C for 45 min. Following incubation, iodoacetamide was added to a concentration of 25 mM and samples were incubated at room temperature in the dark for 30 min. Samples were diluted 10-fold with 2 mM CaCl2, 50 mM Tris-HCl, pH 8.0. Samples were digested with trypsin (Pierce) at 37 °C for 5 h. Digestion was quenched by adding formic acid to 1% (v/v). Tryptic peptides were filtered through Amicon Ultra 30 kD spin filtration columns and bound, washed, and eluted from HyperSep C18 SpinTips (Thermo Scientific). Eluted peptides were dried by speed-vac and resuspended in Buffer C (5% acetonitrile, 0.1% formic acid) for analysis by LC-MS/MS.

For LC-MS/MS analysis, peptides were subjected to separation by C18 reverse phase chromatography on a Dionex Ultimate 3000 RSLCnano UHPLC system (Thermo Scientific). Peptides were loaded onto an Acclaim C18 PepMap RSLC column (Dionex; Thermo Scientific) and eluted using a 5–40% acetonitrile gradient over 250 min at 300 nl/min flow rate. Eluted peptides were directly injected into an Orbitrap Elite mass spectrometer (Thermo Scientific) by nano-electrospray and subject to data-dependent tandem mass spectrometry, with full precursor ion scans (MS1) collected at 60,000 resolution. Monoisotopic precursor selection and charge-state screening were enabled, with ions of charge > + 1 selected for collision-induced dissociation (CID). Up to 20 fragmentation scans (MS2) were collected per MS1. Dynamic exclusion was active with 45 s exclusion for ions selected twice within a 30 s window.

Spectra were searched against an E. coli strain REL606 protein sequence database and common contaminant proteins (MaxQuant using SEQUEST (Proteome Discoverer 1.4; Thermo Scientific). Fully-tryptic peptides were considered, with up to two missed cleavages. Tolerances of 10 ppm (MS1) and 0.5 Da (MS2), carbamidomethylation of cysteine as static modification, and oxidized methionine as dynamic modification were used. High-confidence peptide-spectral matches (PSMs) were filtered at <1% false discovery rate determined by Percolator (Proteome Discoverer 1.4; Thermo Scientific).

Flux analysis

Flux ratios were obtained from the samples grown with 13C labeled glucose, using methods previously described43,44. Cell pellets were resuspended in 200 ml of 6N HCl, hydrolyzed at 105 °C overnight, and dried at 95 °C for up to 24 h. To the hydrolyzed cell material we added 40 ml of dimethylformamide (DMF) and gently mixed until a “light straw” color was obtained. The DMF resuspension was transferred to a GC-MS vial with plastic insert and 40 ml of N-tert-butyldimethylsilyl-N-methyltrifluoroacetamide with 1% tert-butyldimethyl-chlorosilane (v/v); vials were capped and baked at 85 °C for 2 h, and samples were analyzed within 2 days of derivitization.

Analysis of derivitized samples was performed on a Shimadzu QP2010 Plus GC-MS (Columbia, MD) with autosampler. The GC-MS protocol included: 1 mL of sample injected with 1:10 split mode at 230 °C; an oven gradient of 160 °C for 1 min, ramp to 310 °C at 20 °C/min, and hold at 310 °C for 0.5 min; and flow rate was 1 mL/min in helium. A total of five runs were performed for each sample: a blank injection of DMF to waste, a blank injection of DMF to the column, and three technical replicates of each vial. Flux inference was performed using the FiatFlux software35,44.

Normalization and quality control of RNA and protein counts

Our raw input data consisted of RNA and protein counts. Protein counts can be fractional, because some peptide spectra cannot be uniquely mapped to a single protein, so they are equally divided amongst these proteins. We rounded all protein counts to the nearest integer for subsequent analysis. We set the counts of all unobserved proteins to zero. For RNA, we only analyzed the counts of reads that overlapped annotated protein coding genes, i.e., reads mapping to mRNAs. This resulted in 4196 matching mRNA and protein counts for each sample. Subsequently, all mRNA and protein counts were analyzed in the same manner.

We next performed quality control, by checking replicates of the same condition for consistency. For all pairs of replicate samples, we made histograms of the log-differences of RNA or protein counts. If the two samples differ only by experimental noise, i.e., by random measurement error that causes unbiased variation in the counts of individual RNAs or proteins, then the resulting histogram should have a mode at 0 and be approximately bell-shaped. If a sample consistently shows deviations from this expectation when compared to other samples, then there are likely systematic problems with this sample. We tested the quality of our mRNA and protein samples by looking the similarity between samples collected in similar conditions but from different batches whenever possible, i.e., whenever we have at least 3 replicates. Out of 152 mRNA samples we found only two samples (samples MURI_091 and MURI_130, Supplementary Table S1) that seemed to deviate from their biological replicas. Among 105 protein samples we found no major deviation between biological replicas. Because of this broad consistency among all samples for the same growth conditions, we keep all samples for subsequent analysis.

After quality control, we normalized read counts using size-factors calculated via DESeq217. Because we had many mRNAs and proteins with counts of zero at some condition, we added pseudo-counts of +1 to all counts before calculating size factors. We then used those size factors to normalize the original raw counts (i.e., without pseudo-counts).


We clustered normalized mRNA and protein counts based on their Euclidian distance, using the complete linkage method implemented in the flashclust45 package, which is a faster implementation of the hclust function in R. This method defines the cluster distance between two clusters as the maximum distance between their individual components46. At every stage of the clustering process, the two closest clusters are merged into the next bigger cluster. The final outcome of this process is a dendogram that measures the closeness of different samples to each other.

To assess whether the clustering process significantly grouped similar samples together, we employed a reshuffling test. For any category that we tested for significant clustering (e.g., carbon source, Na stress, or batch number), we calculated the mean cophenetic distance in the clustering dendogram between all pairs belonging to the same level of the categorical variable tested (e.g., same carbon source). We then repeatedly reshuffled the labeling within each category and recalculated the mean cophenetic distance each time. Finally, we calculated z scores of the original cophenetic distance relative to the distribution of reshuffled values.

Identifying differentially expressed genes

We used DESeq217 to identify differentially expressed mRNAs and proteins across conditions. We used two reference conditions in our comparisons, one for exponential phase and one for stationary phase. The reference conditions always had glucose as carbon source and base Na+ and Mg2+ concentrations. We did not compare exponential phase to stationary phase samples, since this comparison was done in depth previously10 for samples grown on glucose and with base Na+ and Mg2+ concentrations.

We corrected for possible batch effects by including batch number as a predictor variable in the design formula of DESeq2. In general, our design formula was An external file that holds a picture, illustration, etc.
Object name is srep45303-m1.jpg , where An external file that holds a picture, illustration, etc.
Object name is srep45303-m2.jpg was either a categorical variable representing the carbons source or growth phase (exponential or stationary) or a quantitative variable representing Na+ level or Mg2+ level. In analyses controlling for growth rate in addition to batch effects, our design formula was An external file that holds a picture, illustration, etc.
Object name is srep45303-m3.jpg An external file that holds a picture, illustration, etc.
Object name is srep45303-m4.jpg.

We considered genes as differentially expressed between two conditions if their log2 fold change was >1 and their FDR-corrected P value < 0.05. We subsequently annotated differentially expressed genes with DAVID20 version 6.8 Beta released in May 2016. We considered both KEGG pathways18 and GO annotations19.

Statistical analysis and data availability

All statistical analyses were performed in R. All processed data and analysis scripts are available on github:

Raw Illumina read data and processed files of read counts per gene and normalized expression levels per gene have been deposited in the NCBI GEO database47 (accession GSE67402 for the glucose time-course previously published10, accession GSE94117 for all other experiments). The mass spectrometry proteomics data have been deposited to the ProteomeXchange Consortium via the PRIDE partner repository48 (accession PXD002140 for the glucose time-course previously published10, accession PXD005721 for all other experiments). Raw GC-MS data for flux measurements have been deposited on the Texas Data Repository Dataverse at

Additional Information

How to cite this article: Caglar, M. U. et al. The E. coli molecular phenotype under different growth conditions. Sci. Rep. 7, 45303; doi: 10.1038/srep45303 (2017).

Supplementary Material

Supplementary Text:
Supplementary Dataset 1:
Supplementary Dataset 2:
Supplementary Dataset 3:
Supplementary Dataset 4:
Supplementary Dataset 5:
Supplementary Dataset 6:
Supplementary Dataset 7:
Supplementary Dataset 8:
Supplementary Dataset 9:
Supplementary Dataset 10:
Supplementary Dataset 11:
Supplementary Dataset 12:
Supplementary Dataset 13:
Supplementary Dataset 14:


This study was funded by Army Research Office (ARO, grant W911NF-12–1–0390 to CJM, EMM, JEB, and COW. EMM also acknowledges support from the NIH (DP1 OD009572) and Welch Foundation (F1515). COW also acknowledges support from the NIH (R01 GM088344, R01 AI120560) and the NSF (Cooperative agreement no. DBI-0939454, BEACON Center). The Texas Advanced Computing Center (TACC) at The University of Texas at Austin provided high-performance computing resources.


The authors declare no competing financial interests.

Author Contributions M.U.C., J.R.H., C.J.M., E.M.M., J.E.B., C.O.W. conceived the study and designed the experiments. J.R.H., C.S.B., D.R.B., S.M.C., A.D. performed the experiments. V.S., D.K.S. contributed computer code used for data analysis. M.U.C., J.H.R., W.F.L., B.L.S., V.S., D.V.W., J.E.B., C.O.W. analyzed the data. M.U.C., W.F.L., V.S., D.V.W. prepared the figures. M.U.C., B.L.S., D.V.W., C.O.W. wrote the initial paper draft. All authors reviewed and edited the final manuscript.


  • Botstein D. & Risch N. Discovering genotypes underlying human phenotypes: past successes for mendelian disease, future approaches for complex disease. Nat. Genet. 33, 228–237 (2003). [PubMed]
  • Zhang W., Li F. & Nie L. Integrating multiple ‘omics’ analysis for microbial biology: application and methodologies. Microbiol. Read. Engl. 156, 287–301 (2010). [PubMed]
  • Joyce A. R. & Palsson B. Ø. The model organism as a system: integrating ‘omics’ data sets. Nat. Rev. Mol. Cell Biol. 7, 198–210 (2006). [PubMed]
  • Ideker T. et al. . Integrated Genomic and Proteomic Analyses of a Systematically Perturbed Metabolic Network. Science 292, 929–934 (2001). [PubMed]
  • Vogel C. & Marcotte E. M. Insights into the regulation of protein abundance from proteomic and transcriptomic analyses. Nat. Rev. Genet. 13, 227–232 (2012). [PMC free article] [PubMed]
  • Lee S. Y. High cell-density culture of Escherichia coli. Trends Biotechnol. 14, 98–105 (1996). [PubMed]
  • Blattner F. R. et al. . The Complete Genome Sequence of Escherichia coli K-12. Science 277, 1453–1462 (1997). [PubMed]
  • Yoon S. H., Han M.-J., Lee S. Y., Jeong K. J. & Yoo J.-S. Combined transcriptome and proteome analysis of Escherichia coli during high cell density culture. Biotechnol. Bioeng. 81, 753–767 (2003). [PubMed]
  • Gadgil M., Kapur V. & Hu W.-S. Transcriptional response of Escherichia coli to temperature shift. Biotechnol. Prog. 21, 689–699 (2005). [PubMed]
  • Houser J. R. et al. . Controlled Measurement and Comparative Analysis of Cellular Components in E. coli Reveals Broad Regulatory Changes in Response to Glucose Starvation. PLOS Comput Biol 11, e1004400 (2015). [PMC free article] [PubMed]
  • Soufi B., Krug K., Harst A. & Macek B. Characterization of the E. coli proteome and its modifications during growth and ethanol stress. Front. Microbiol. 6, 103 (2015). [PMC free article] [PubMed]
  • Schmidt A. et al. . The quantitative and condition-dependent Escherichia coli proteome. Nat. Biotechnol. 34, 104–110 (2016). [PMC free article] [PubMed]
  • Lewis N. E. et al. . Omic data from evolved E. coli are consistent with computed optimal growth from genome-scale models. Mol. Syst. Biol. 6, 390 (2010). [PMC free article] [PubMed]
  • Lewis N. E., Cho B.-K., Knight E. M. & Palsson B. O. Gene Expression Profiling and the Use of Genome-Scale In Silico Models of Escherichia coli for Analysis: Providing Context for Content. J. Bacteriol. 191, 3437–3444 (2009). [PMC free article] [PubMed]
  • Gan G., Ma C. & Wu J. Data Clustering: Theory, Algorithms, and Applications (SIAM, 2007).
  • Sokal R. R. & Rohlf F. J. The Comparison of Dendrograms by Objective Methods. Taxon 11, 33–40 (1962).
  • Love M. I., Huber W. & Anders S. Moderated estimation of fold change and dispersion for RNA-seq data with DESeq2. Genome Biol. 15, 550 (2014). [PMC free article] [PubMed]
  • Kanehisa M. & Goto S. KEGG: Kyoto Encyclopedia of Genes and Genomes. Nucleic Acids Res. 28, 27–30 (2000). [PMC free article] [PubMed]
  • Ashburner M. et al. . Gene Ontology: tool for the unification of biology. Nat. Genet. 25, 25–29 (2000). [PMC free article] [PubMed]
  • Huang D. W., Sherman B. T. & Lempicki R. A. Systematic and integrative analysis of large gene lists using DAVID bioinformatics resources. Nat. Protoc. 4, 44–57 (2008). [PubMed]
  • Shi W., Li C., Louise C. J. & Adler J. Mechanism of adverse conditions causing lack of flagella in Escherichia coli. J. Bacteriol. 175, 2236–2240 (1993). [PMC free article] [PubMed]
  • Braun V., Hantke K. & Köster W. Bacterial iron transport: mechanisms, genetics, and regulation. Met. Ions Biol. Syst. 35, 67–145 (1998). [PubMed]
  • Weissenborn D. L., Wittekindt N. & Larson T. J. Structure and regulation of the glpFK operon encoding glycerol diffusion facilitator and glycerol kinase of Escherichia coli K-12. J. Biol. Chem. 267, 6122–6131 (1992). [PubMed]
  • Fujita Y., Nihashi J. & Fujita T. The characterization and cloning of a gluconate (gnt) operon of Bacillus subtilis. J. Gen. Microbiol. 132, 161–169 (1986). [PubMed]
  • Bausch C. et al. . Sequence analysis of the GntII (subsidiary) system for gluconate metabolism reveals a novel pathway for L-idonic acid catabolism in Escherichia coli. J. Bacteriol. 180, 3704–3710 (1998). [PMC free article] [PubMed]
  • Dong J. M., Taylor J. S., Latour D. J., Iuchi S. & Lin E. C. Three overlapping lct genes involved in L-lactate utilization by Escherichia coli. J. Bacteriol. 175, 6671–6678 (1993). [PMC free article] [PubMed]
  • Gilad Y. & Mizrahi-Man O. A reanalysis of mouse ENCODE comparative gene expression data. F1000Research 4, 121 (2015). [PMC free article] [PubMed]
  • Differential analysis of count data – the DESeq2 package. Available at: (Accessed: 12th April 2016) (2016).
  • Chen C. et al. . Removing batch effects in analysis of expression microarray data: an evaluation of six batch adjustment methods. PloS One 6, e17238 (2011). [PMC free article] [PubMed]
  • Lazar C. et al. . Batch effect removal methods for microarray gene expression data integration: a survey. Brief. Bioinform. 14, 469–490 (2013). [PubMed]
  • Johnson W. E., Li C. & Rabinovic A. Adjusting batch effects in microarray expression data using empirical Bayes methods. Biostat. Oxf. Engl. 8, 118–127 (2007). [PubMed]
  • Luo J. et al. . A comparison of batch effect removal methods for enhancement of prediction performance using MAQC-II microarray gene expression data. Pharmacogenomics J. 10, 278–291 (2010). [PMC free article] [PubMed]
  • Kim M., Rai N., Zorraquino V. & Tagkopoulos I. Multi-omics integration accurately predicts cellular state in unexplored conditions for Escherichia coli. Nat. Commun. 7 (2016). [PMC free article] [PubMed]
  • Zamboni N., Fendt S.-M., Rühl M. & Sauer U. 13C-based metabolic flux analysis. Nat. Protoc. 4, 878–892 (2009). [PubMed]
  • Zamboni N., Fischer E. & Sauer U. FiatFlux–a software for metabolic flux analysis from 13C-glucose experiments. BMC Bioinformatics 6, 209 (2005). [PMC free article] [PubMed]
  • Lenski R. E., Rose M. R., Simpson S. C. & Tadler S. C. Long-Term Experimental Evolution in Escherichia coli. I. Adaptation and Divergence During 2,000 Generations. Am. Nat. 138, 1315–1341 (1991).
  • Stead M. B. et al. . RNAsnapTM: a rapid, quantitative and inexpensive, method for isolating total RNA from bacteria. Nucleic Acids Res. 40, e156 (2012). [PMC free article] [PubMed]
  • Jeong H. et al. . Genome Sequences of Escherichia coli B strains REL606 and BL21(DE3). J. Mol. Biol. 394, 644–652 (2009). [PubMed]
  • Burge S. W. et al. . Rfam 11.0: 10 years of RNA families. Nucleic Acids Res. 41, D226–232 (2013). [PMC free article] [PubMed]
  • Dodt M., Roehr J. T., Ahmed R. & Dieterich C. FLEXBAR—Flexible Barcode and Adapter Processing for Next-Generation Sequencing Platforms. Biology 1, 895–905 (2012). [PMC free article] [PubMed]
  • Langmead B. & Salzberg S. L. Fast gapped-read alignment with Bowtie 2. Nat. Methods 9, 357–359 (2012). [PMC free article] [PubMed]
  • Anders S., Pyl P. T. & Huber W. HTSeq - A Python framework to work with high-throughput sequencing data (2014). [PMC free article] [PubMed]
  • Harcombe W. R., Delaney N. F., Leiby N., Klitgord N. & Marx C. J. The ability of flux balance analysis to predict evolution of central metabolism scales with the initial distance to the optimum. PLoS Comput. Biol. 9, e1003091 (2013). [PMC free article] [PubMed]
  • Zamboni N., Fendt S.-M., Rühl M. & Sauer U. (13)C-based metabolic flux analysis. Nat. Protoc. 4, 878–892 (2009). [PubMed]
  • Langfelder P. & Horvath S. Fast R Functions for Robust Correlations and Hierarchical Clustering. J. Stat. Softw. 46 (2012). [PMC free article] [PubMed]
  • Soni Madhulatha T. An Overview on Clustering Methods. ArXiv E-Prints 1205, arXiv:1205.1117 (2012).
  • Barrett T. et al. . NCBI GEO: archive for functional genomics data sets–update. Nucleic Acids Res. 41, D991–995 (2013). [PMC free article] [PubMed]
  • Vizcaíno J. A. et al. . ProteomeXchange provides globally coordinated proteomics data submission and dissemination. Nat. Biotechnol. 32, 223–226 (2014). [PMC free article] [PubMed]

Articles from Scientific Reports are provided here courtesy of Nature Publishing Group