Search tips
Search criteria 


Logo of scirepAboutEditorial BoardFor AuthorsScientific Reports
Sci Rep. 2017; 7: 44766.
Published online 2017 March 23. doi:  10.1038/srep44766
PMCID: PMC5363068

Characterization of Thin Film Materials using SCAN meta-GGA, an Accurate Nonempirical Density Functional


We discuss self-consistently obtained ground-state electronic properties of monolayers of graphene and a number of ’beyond graphene’ compounds, including films of transition-metal dichalcogenides (TMDs), using the recently proposed strongly constrained and appropriately normed (SCAN) meta-generalized gradient approximation (meta-GGA) to the density functional theory. The SCAN meta-GGA results are compared with those based on the local density approximation (LDA) as well as the generalized gradient approximation (GGA). As expected, the GGA yields expanded lattices and softened bonds in relation to the LDA, but the SCAN meta-GGA systematically improves the agreement with experiment. Our study suggests the efficacy of the SCAN functional for accurate modeling of electronic structures of layered materials in high-throughput calculations more generally.

Discovery of graphene, a one-atom-thick crystal of carbon, has spurred an intense interest in the electronic properties of 2D materials more generally1,2. Recent research has turned to ‘beyond graphene’ materials, which exhibit novel spin and charge transport properties, including the possibility of harboring quantum spin Hall and other topological phases3 relevant for next generation electronics applications and as materials platforms for replacing the current Si-based technologies. For example, unlike the flat structure of graphene, silicene, germanene and stanene, which are Si, Ge and Sn based cousins of graphene, assume a crystal structure that is naturally buckled4,5,6. As a result, these materials exhibit spin-split states, which can be controlled via external electric fields7. Phosphorene displays remarkable mechanical flexibility and sensitive tuning of electronic properties by mechanical strain8. Ultra-thin films of transition metal dichalcogenides (TMDs) undergo a transition from an indirect to a direct band gap semiconductor in the monolayer limit, and have become attractive candidates for nanoelectronics9, water-splitting10, photocatalysis11 and other applications.

The need for theoretical methods capable of accurate and efficient prediction of structural and electronic properties of atomically thin films and layered materials is clear. In this connection, improvements in density functional theory (DFT)12 based first-principles computations, which have been the workhorse in the field for over five decades13,14, have centered around the development of new classes of exchange-correlation functionals. One of the latest advances in this direction is the SCAN meta-GGA scheme, which has been proposed recently15. Our purpose in this study is to assess the efficacy of the SCAN meta-GGA for addressing the ground state properties of 2D materials. SCAN meta-GGA has been tested in diversely bonded systems16, where it has been shown to capture a wide range of physical structures without being fitted to any specific type of bonding. These SCAN-based existing studies include: MnO2 polymorphs17; Cu-intercalated birnessite18; and, band gaps of semiconductors and insulators19. Here we show that SCAN meta-GGA yields a systematic improvement over the LDA and GGA (at a comparable cost) in modeling ground state properties of 2D materials. For this purpose, we consider the application of SCAN to monolayers of graphene and a number of ‘beyond graphene’ compounds, including films of transition-metal dichalcogenides (TMDs) as exemplar 2D systems.

An outline of this article is as follows. The introductory remarks above are followed by an overview of the SCAN functional and its construction. We then describe the relevant computational details, followed by a presentation and discussion of our results, and a summary of our conclusions.

Overview of the SCAN Methodology

Within the framework of the DFT, the total energy of the many-body electron system, Etotal[n], can be written in terms of the electron density, n, as

An external file that holds a picture, illustration, etc.
Object name is srep44766-m1.jpg

where K is the independent-electron kinetic energy, Eie is the Coulomb energy between the electrons and ions, Eee describes the classical electron-electron Coulomb interaction, and Exc the exchange-correlation energy. Approximation schemes for Exc can be arranged conceptually on the rungs of the so-called DFT Jacob’s Ladder20 in the sense that this ladder leads to the ‘heaven’ of chemical accuracy. Various rungs of this ladder, beginning with the lowest rung, are: LDA21,22; GGA23,24; meta-GGA25,26; hybrid functionals27; and, finally the random phase approximation (RPA)28. Computational demands, along with the accuracy of the schemes increase as we go up the rungs of the ladder.

Formally, the Exc[n] term can be cast as a double integral over space, which involves half of the Coulomb interaction between electrons and the associated exchange-correlation holes26,29, but it is computationally expensive to evaluate. In the semilocal approximation, this term is reduced to a single integral of the general form

An external file that holds a picture, illustration, etc.
Object name is srep44766-m2.jpg

where An external file that holds a picture, illustration, etc.
Object name is srep44766-m3.jpg is the electron density, [nabla]n its gradient, An external file that holds a picture, illustration, etc.
Object name is srep44766-m4.jpg the positive orbital kinetic energy density, and Ψi,σ are the Kohn-Sham orbitals. Nonempirical functionals are generally built to satisfy exact constraints as far as possible. It is here that the SCAN meta-GGA15 makes a substantial advance as it is the only semilocal exchange-correlation functional which satisfies the complete set of 17 known exact constraints that can be satisfied by semilocal functionals. Moreover, SCAN is ‘appropriately normed’ in that it accurately captures interactions in rare-gas atoms and unbonded systems (see Supplementary Material of Sun et al.15). The earlier nonempirical meta-GGAs such as the Tao-Perdew-Staroverov-Scuseria (TPSS)25 and revTPSS30 meta-GGA have been shown to be less accurate than the Perdew-Burke-Ernzerhof (PBE) GGA for the critical pressures of structural phase transitions of solids31,32. SCAN meta-GGA eliminates this problem by introducing the dimensionless parameter

An external file that holds a picture, illustration, etc.
Object name is srep44766-m5.jpg

where An external file that holds a picture, illustration, etc.
Object name is srep44766-m6.jpg is the single-orbital limit of τ, and An external file that holds a picture, illustration, etc.
Object name is srep44766-m7.jpg is the uniform density limit. The case of α = 0 corresponds to covalent single bonds while α  1 to metallic, and the α [dbl greater-than sign] 1 limit describes weak bonds. The rare-gas-atom norm contains information about 0 < α < ∞, and some information about α [dbl greater-than sign] 1, while the non-bonded-interaction norm (the compressed Ar2) provides more information about α [dbl greater-than sign] 1.

Recently, SCAN meta-GGA has been tested in diversely bonded systems16, where it was shown to be sophisticated enough to model a wide range of physical structures without being fitted to any bonded system. In the present work, we apply it further to the class of thin film materials and we show a similar trend of successful predictions of ground-state structural and electronic properties. In particular, SCAN improves the overall agreement with experiment compared to LDA and GGA, at a comparable computational cost.

Computational Details

We have performed first-principles calculations using the pseudopotential projector augmented-wave method33 as implemented in the Vienna Ab-Initio Simulation Package (VASP)34,35, with a kinetic energy cutoff of 400 eV (TMD monolayers and Bi2Se3 quintuple layer) and 800 eV (graphene, silicene, germanene, and phosphorene) for the plane-wave basis set. The exchange-correlation functional was treated using LDA15,36, GGA-PBE23,24 and SCAN meta-GGA15. A 12 × 12 × 1 Γ-centered k-point mesh was used to sample the Brillouin zone. Spin-orbit coupling effects were included in the case of TMD monolayers and Bi2Se3 quintuple layer in a self-consistent manner. We used a vacuum layer of at least 15 Å thickness in the z-direction to simulate the films. The equilibrium positions of the ions were calculated via structural optimization, where the internal degrees of freedom, along with the shape and volume of the unit cell, were allowed to vary until the residual forces per atom were less than 0.005 eV/Å. The resulting equilibrium unit cell was subsequently expanded and compressed uniformly around the equilibrium volume, while keeping the shape of the unit cell fixed. The equilibrium lattice constants were calculated by fitting the total energy per cell as a function of volume using the Birch-Murnaghan37,38 equation of state:

An external file that holds a picture, illustration, etc.
Object name is srep44766-m8.jpg

where E is the total energy per cell, E0 the equilibrium total energy per cell, B0 the equilibrium bulk modulus, V the unit cell volume, V0 the equilibrium unit cell volume and An external file that holds a picture, illustration, etc.
Object name is srep44766-m9.jpg the first derivative of the bulk modulus with respect to V. In this way, we determine V0 (from which the equilibrium lattice constant a was extracted), B0 and An external file that holds a picture, illustration, etc.
Object name is srep44766-m10.jpg. It should be noted that we are extending the Murnaghan fit to 2D materials, and quantities such as the bulk modulus should be regarded as fitting parameters rather than physical quantities as discussed by Behera and Mokhopadhyay [BM]39. BM simulated the 2D-hexagonal structure of graphene and silicene using 3D-hexagonal supercells with large values of the lattice parameter c to keep the interlayer interaction negligibly small. They calculated for fixed values of a the values of c and the ground state energy E0 for various cell volumes V, corresponding to different in-plane lattice constants a. Then, by fitting E0 as a function of V with the Birch-Murnaghan equation of state, they extracted a from the value of V at the minimum of E0. Finally, the value of the lattice constant a corresponding to c going to infinity, was obtained by a linear fit of the data set (a, 1/c). Here, we have followed a similar procedure.

Results and Discussion

We present ground-state structural and electronic properties of a series of free-standing monolayer (ML) materials, which are: graphene, silicene, germanene and phosphorene, TMD monolayers MX2 in the semiconducting 2H phase40 (M = Mo, W; X = S, Se, Te), and one quintuple layer (QL) film of Bi2Se3. The crystal structures are depicted in Fig. 1. We tested how SCAN performs compared to the LDA and PBE-GGA by calculating the lattice constants a, the nearest-atom bond lengths d for graphene, silicene, germanene and phosphorene, the buckling heights Δ for silicene, germanene and phosphorene, and X-M distances dM−X for the TMD monolayers (Fig. 2). These parameters are defined in Fig. 1, and their values are given in Tables 1 and and2.2. For the TMD monolayers, we also extracted the band gaps Eg, as well as the spin-splittings at the K point of the conduction band ΔECB, and the valence band ΔEVB, as defined in Fig. 3.

Figure 1
Crystal structure of graphene in top view, and of silicene, germanene, phosphorene, Bi2Se3 quintuple layer and MX2 monolayers in top and side views.
Figure 2
Comparison between the calculated structural parameters using different exchange-correlation functionals: (a) and (b) Lattice constants, a. (c) and (d) Nearest-atom bond lengths, d, and transition metal-chalcogen distances, dM−X. The experimental ...
Figure 3
(a) WTe2 monolayer band structure along the high-symmetry lines M-K-Γ-K-M in the Brillouin zone. The colored dots denote spin polarization: blue is for spin up, and red is for spin down. (b) Energy band gap values for the MX2 monolayers, ...
Table 1
Ground-state lattice constants a, bulk moduli B 0 and first derivatives B´0 equation M1, calculated by fitting the total energy per cell with the Birch-Murnaghan equation of state.
Table 2
Nearest-atom bond lengths d and buckling heights Δ for graphene and ‘beyond graphene’ materials, as well as M−X bond lengths d M−X for the TMD monolayers.

Table 1 lists values of lattice constants a, bulk moduli B0 and their first derivatives An external file that holds a picture, illustration, etc.
Object name is srep44766-m11.jpg, the last two being fitting parameters as we discussed in the Computational Details section above. Trends in the lattice constants are visualized in frames (a) and (b) of Fig. 2. The LDA is seen to underestimate a, in agreement with the expectation that it leads to overbinding in solids41. On the other hand, the GGA overcorrects a, especially for heavier elements as seen by comparing germanene with silicene and graphene in Fig. 1(a), a behavior observed in 3D metals more generally24. Figure 2(a) and (b) show that the SCAN meta-GGA values lie between the LDA and GGA predictions, suggesting that SCAN meta-GGA cures the overcorrection of the GGA, and generally yields better agreement with experiment, within about 0.5%, although experimental data on freestanding silicene, germanene and phosphorene are not currently available. Remarkably, for the QL Bi2Se3, the SCAN-based lattice parameter is also in excellent accord with the experimental value reported by Kou et al.42.

The role of electron correlations in graphene remains an open problem. Accurate Quantum Monte Carlo (QMC) simulations suggest that the ground state of graphene is highly nontrivial, with significant contributions from resonating valence bond (RVB) type states43. [RVB effects appear to be important in systems of low dimensionality more generally, such as the Li clusters]44. The fact that SCAN reproduces the experimental lattice constant of graphene quite well thus indicates that SCAN can reasonably capture features of complex ground states in 2D systems.

It is interesting to consider the QMC result for the lattice constant along the armchair direction in phosphorene45. Surprisingly, we find that LDA already overestimates the QMC armchair lattice constant, even though one normally expects overbinding from the LDA. [Note, experimental lattice constants for phosphorene are not currently available]. Furthermore, we find that SCAN also overestimates the QMC result, as seen in Table 1, and performs at the level of the optB88-vdW46 functional, see Fig. 2(a). It is not clear to what extent relaxing the fixed-node approximation in QMC might expand the armchair lattice constant in monolayer black phosphorus, and restore the usual paradigm of LDA underestimating lattice constants more generally. We emphasize that when phosphorene layers are coupled, it becomes crucial to include van der Waals corrections. For example, in bulk black phosphorus, SCAN + rvv10 yields lattice constants in close agreement with both experiment and QMC47, and represents a considerable improvement over PBE + vdW. Concerning the phosphorene lattice constant along the zigzag direction, our results in Table 1 show that is fairly insensitive to corrections beyond the LDA.

Table 2 shows that the equilibrium structures assumed by all 2D films considered (other than graphene) are buckled, i.e. exhibit non-zero values of Δ, and that the buckling is amplified in going from the LDA to the GGA. In sharp contrast, SCAN predicts smaller buckling heights for silicene and germanene compared to the LDA. A possible reason for this flattening trend is that SCAN satisfies the non-uniform coordinate scaling constraint15, while the LDA and GGA do not. In phosphorene, since the buckling height is much larger than that in silicene and germanene, and lies at the scale of a typical chemical bond, SCAN predicts a value comparable to LDA and GGA. Turning to bond lengths, here also we see that, like the lattice constants, SCAN systematically rectifies GGA’s tendency to overcorrect LDA, see Table 2 and Fig. 2(c) and (d). For the TMD films trends in bond lengths between the LDA, SCAN and GGA are similar. Notably, spin-orbit effects, which are included in the calculations, do not seem to influence the trends in bond lengths.

Given the interest in potential applications of TMD films11, Fig. 3(a) shows the band structure of a WTe2 monolayer, which is typical of the family of TMD monolayers considered. Table 3 gives the band gaps obtained from the band structures based on different functionals computed at the equilibrium crystal structures, see also Fig. 3(b). Note that our band structures arise from a ground-state theory41,48, and thus do not accurately model the band gaps. Nevertheless, the LDA is well-known to reasonably capture optical energy gaps in many materials. GGA expands the lattice, and it generally worsens the band gap. In contrast, consistent with the findings of Yang et al.19, SCAN restores an improved agreement with the experimental band gaps, together with improved lattice structures. This good agreement can be understood to be a result of using the generalized Kohn-Sham theory48 within SCAN meta-GGA. Incidentally, within the many-body body perturbation theory, Qiu et al.49 have noticed an interesting compensation between the quasiparticle (QP) and excitonic corrections in the case of transition metal dichalcogenides. For example, in MoS2, the GW approximation yields a direct gap of 2.67 eV. The observed optical gap is about 0.8 eV smaller, which could be explained as the exciton binding energy.

Table 3
Values of the energy band gaps E g , along with the corresponding optical gaps obtained from photoluminescence experiments An external file that holds a picture, illustration, etc.
Object name is srep44766-m32.jpg .

Returning to Fig. 3(a), note that the conduction band (CB) and the valence band (VB) are split at the K-point, which is a consequence of spin-orbit coupling50,51. Furthermore, because TMD monolayers lack inversion symmetry, there is an inversion in the spin-resolved band structures near the Fermi level between the K and K′ symmetry points (Fig. 3(a)), where blue dots denote spin up and red dots spin down. These features of band structures of TMD monolayers have been predicted in earlier DFT calculations52 and observed in experiments53,54,55,56,57. We define the CB and VB spin-splitting energies as: An external file that holds a picture, illustration, etc.
Object name is srep44766-m12.jpg, and An external file that holds a picture, illustration, etc.
Object name is srep44766-m13.jpg. The values of these splitting energies are listed in Table 3. We see that ΔECB < 0 for MoX2 monolayers, and ΔECB > 0 for the WX2 counterparts. This sign change can be explained in terms of the material-dependent spin-orbit coupling effects52. The results of Table 3 indicate that SCAN predicts the spin-splittings in TMD monolayers, at least in some cases (MoS2, MoSe2 and WS2), more accurately than the LDA and GGA (see Fig. 3(d)). We thus adduce that SCAN reasonably describes the delicate balance between the exchange, correlation and spin-orbit coupling interactions, which underlie spin-resolved band structures. The exquisite ability of SCAN to capture such subtle effects will allow the study of controlled magnetism in 2D crystals. Interesting proposals have been put forward for monolayer transition metal dichalcogenides58, but magnetic order has not been proven so far in experiments. SCAN meta-GGA could thus accelerate the discovery of these fascinating materials.


In order to test the efficacy of the recently proposed SCAN functional toward capturing improved ground-state properties of layered materials, we have carried out SCAN based computations on monolayers of graphene and a number of ‘beyond graphene’ compounds, including films of transition-metal dichalcogenides (TMDs). The results are compared and contrasted with those based on the commonly used LDA and GGA schemes. SCAN is shown to yield systematic improvements in the equilibrium lattice constants and the nearest-atom bond lengths. We also consider band gaps and spin-splittings in the TMD films, and show that here also the SCAN functional leads to improvements, difficulties of interpreting band gaps in a ground-state computation notwithstanding. We thus conclude that SCAN would provide an improved description of the ground-state electronic and geometric structures of layered materials more generally, at a cost comparable to the LDA and GGA.

Additional Information

How to cite this article: Buda, I. G. et al. Characterization of Thin Film Materials using SCAN meta-GGA, an Accurate Nonempirical Density Functional. Sci. Rep. 7, 44766; doi: 10.1038/srep44766 (2017).

Publisher's note: Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.


It is a pleasure to thank Professor J. P. Perdew for important discussions. This work was supported by the US Department of Energy (DOE), Office of Science, Basic Energy Sciences grant number DE-FG02-07ER46352 (core research), and benefited from Northeastern University’s Advanced Scientific Computation Center (ASCC), the NERSC supercomputing center through DOE grant number DE-AC02-05CH11231 and the support (applications to layered materials) from the DOE EFRC: Center for the Computational Design of Functional Layered Materials (CCDM) under grant number DE-SC0012575.


The authors declare no competing financial interests.

Author Contributions B.B., J.S. and C.L. conceived and initiated the study. J.S. and A.R. provided the SCAN meta-GGA functional. I.G.B. performed the calculations and analysis. I.G.B., C.L., B.B. and A.B. prepared the manuscript. All authors contributed to the discussions and reviewed the manuscript.


  • Novoselov K. S. et al. . Two-dimensional atomic crystals. Proceedings of the National Academy of Sciences of the United States of America 102, 10451–10453 (2005). [PubMed]
  • Castro Neto A. H., Guinea F., Peres N. M. R., Novoselov K. S. & Geim A. K. The electronic properties of graphene. Rev. Mod. Phys. 81, 109–162 (2009).
  • Bansil A., Lin H. & Das T. Colloquium: Topological band theory. Rev. Mod. Phys. 88, 021004 (2016).
  • Jose D. & Datta A. Structures and chemical properties of silicene: Unlike graphene. Accounts of Chemical Research 47, 593–602 (2014). [PubMed]
  • Dávila M. E., Xian L., Cahangirov S., Rubio A. & Lay G. L. Germanene: a novel two-dimensional germanium allotrope akin to graphene and silicene. New Journal of Physics 16, 095002 (2014).
  • Zhu F.-f. et al. . Epitaxial growth of two-dimensional stanene. Nat Mater 14, 1020–1025 (2015). [PubMed]
  • Tsai W.-F. et al. . Gated silicene as a tunable source of nearly 100% spin-polarized electrons. Nat Commun 4, 1500 (2013). [PubMed]
  • Wei Q. & Peng X. Superior mechanical flexibility of phosphorene and few-layer black phosphorus. Applied Physics Letters 104 (2014).
  • Wang Q. H., Kalantar-Zadeh K., Kis A., Coleman J. N. & Strano M. S. Electronics and optoelectronics of two-dimensional transition metal dichalcogenides. Nat Nano 7, 699–712 (2012). [PubMed]
  • Yu X., Prevot M. S., Guijarro N. & Sivula K. Self-assembled 2D Wse2 thin films for photoelectrochemical hydrogen production. Nat Commun 6 (2015). [PMC free article] [PubMed]
  • Singh A. K., Mathew K., Zhuang H. L. & Hennig R. G. Computational screening of 2D materials for photocatalysis. The Journal of Physical Chemistry Letters 6, 1087–1098 (2015). [PubMed]
  • Hohenberg P. & Kohn W. Inhomogeneous electron gas. Phys. Rev. 136, B864–B871 (1964).
  • Zangwill A. A half century of density functional theory. Physics today 68, 34 (2015).
  • Perdew J. P. & Ruzsinszky A. Fourteen easy lessons in density functional theory. International Journal of Quantum Chemistry 110, 2801–2807 (2010).
  • Sun J., Ruzsinszky A. & Perdew J. P. Strongly constrained and appropriately normed semilocal density functional. Phys. Rev. Lett. 115, 036402 (2015). [PubMed]
  • Sun J. et al. . Accurate first-principles structures and energies of diversely bonded systems from an efficient density functional. Nature Chemistry (2016). [PubMed]
  • Kitchaev D. A. et al. . Energetics of MnO2 polymorphs in density functional theory. Phys. Rev. B 93, 045132 (2016).
  • Thenuwara A. C. et al. . Copper-intercalated birnessite as a water oxidation catalyst. Langmuir 31, 12807–12813 (2015). [PubMed]
  • Yang Z.-h., Peng H., Sun J. & Perdew J. P. More realistic band gaps from meta-generalized gradient approximations: Only in a generalized Kohn-Sham scheme. Phys. Rev. B 93, 205205 (2016).
  • Perdew J. P. & Schmidt K. Jacobs ladder of density functional approximations for the exchange correlation energy. AIP Conf. Proc. 577 (2001).
  • Kohn W. & Sham L. J. Self-consistent equations including exchange and correlation effects. Phys. Rev. 140, A1133–A1138 (1965).
  • Vosko S. H., Wilk L. & Nusair M. Accurate spin-dependent electron liquid correlation energies for local spin density calculations: a critical analysis. Canadian Journal of physics 58, 1200–1211 (1980).
  • Perdew J. P., Burke K. & Ernzerhof M. Generalized gradient approximation made simple. Phys. Rev. Lett. 77, 3865–3868 (1996). [PubMed]
  • Barbiellini B., Moroni E. & Jarlborg T. Effects of gradient corrections on electronic structure in metals. Journal of Physics: Condensed Matter 2, 7597 (1990).
  • Tao J., Perdew J. P., Staroverov V. N. & Scuseria G. E. Climbing the density functional ladder: Nonempirical meta–generalized gradient approximation designed for molecules and solids. Physical Review Letters 91, 146401 (2003). [PubMed]
  • Sun J., Xiao B. & Ruzsinszky A. Communication: Effect of the orbital-overlap dependence in the meta generalized gradient approximation. The Journal of Chemical Physics 137 (2012). [PubMed]
  • Heyd J., Scuseria G. E. & Ernzerhof M. Hybrid functionals based on a screened coulomb potential. The Journal of Chemical Physics 118, 8207–8215 (2003).
  • Ren X., Rinke P., Joas C. & Scheffler M. Random-phase approximation and its applications in computational chemistry and materials science. Journal of Materials Science 47, 7447–7471 (2012).
  • Gunnarsson O. & Lundqvist B. I. Exchange and correlation in atoms, molecules, and solids by the spin-density-functional formalism. Phys. Rev. B 13, 4274–4298 (1976).
  • Perdew J. P., Ruzsinszky A., Csonka G. I., Constantin L. A. & Sun J. Workhorse semilocal density functional for condensed matter physics and quantum chemistry. Phys. Rev. Lett. 103, 026403 (2009). [PubMed]
  • Batista E. R. et al. . Comparison of screened hybrid density functional theory to diffusion Monte Carlo in calculations of total energies of silicon phases and defects. Phys. Rev. B 74, 121102 (2006).
  • Xiao B. et al. . Testing density functionals for structural phase transitions of solids under pressure: Si, SiO2, and Zr. Phys. Rev. B 88, 184103 (2013).
  • Kresse G. & Joubert D. From ultrasoft pseudopotentials to the projector augmented-wave method. Phys. Rev. B 59, 1758–1775 (1999).
  • Kresse G. & Furthmüller J. Efficient iterative schemes for ab initio total-energy calculations using a plane-wave basis set. Phys. Rev. B 54, 11169–11186 (1996). [PubMed]
  • Kresse G. & Hafner J. Ab initio molecular dynamics for open-shell transition metals. Phys. Rev. B 48, 13115–13118 (1993). [PubMed]
  • Perdew J. P. & Zunger A. Self-interaction correction to density-functional approximations for many-electron systems. Phys. Rev. B 23, 5048–5079 (1981).
  • Murnaghan F. The compressibility of media under extreme pressures. Proc. Natl. Acad. Sci. USA 30, 244–247 (1944). [PubMed]
  • Birch F. Finite elastic strain of cubic crystals. Phys. Rev. 71, 809–824 (1947).
  • Behera H. & Mukhopadhyay G. Structural and electronic properties of graphene and silicene: An FP-(L)APW+lo study. AIP Conference Proceedings 1313, 152–155 (2010).
  • Kappera R. et al. . Phase-engineered low-resistance contacts for ultrathin MoS2 transistors. Nature materials 13, 1128–1134 (2014). [PubMed]
  • Jones R. O. & Gunnarsson O. The density functional formalism, its applications and prospects. Rev. Mod. Phys. 61, 689–746 (1989).
  • Kou L. et al. . Graphene-based topological insulator with an intrinsic bulk band gap above room temperature. Nano Letters 13, 6251–6255 (2013). [PubMed]
  • Marchi M., Azadi S. & Sorella S. Fate of the resonating valence bond in graphene. Phys. Rev. Lett. 107, 086807 (2011). [PubMed]
  • Nissenbaum D., Spanu L., Attaccalite C., Barbiellini B. & Bansil A. Resonating-valence-bond ground state of lithium nanoclusters. Phys. Rev. B 79, 035416 (2009).
  • Shulenburger L., Baczewski A., Zhu Z., Guan J. & Tomk D. The nature of the interlayer interaction in bulk and few-layer phosphorus. Nano Letters 15, 8170–8175 (2015). [PubMed]
  • Qiao J., Kong X., Hu Z.-X., Yang F. & Ji W. High-mobility transport anisotropy and linear dichroism in few-layer black phosphorus. Nature communications 5 (2014). [PMC free article] [PubMed]
  • Peng H., Yang Z.-H., Perdew J. P. & Sun J. Versatile van der Waals density functional based on a meta-generalized gradient approximation. Phys. Rev. X 6, 041005 (2016).
  • Perdew J. P. et al. . Understanding Band Gaps of Solids in Generalized Kohn-Sham Theory. arXiv:cond-mat.mtrl-sci 1608.06715v1 (2016). [PubMed]
  • Qiu D. Y., Cao T. & Louie S. G. Nonanalyticity, valley quantum phases, and lightlike exciton dispersion in monolayer transition metal dichalcogenides: Theory and first-principles calculations. Phys. Rev. Lett. 115, 176801 (2015). [PubMed]
  • Chang T.-R., Lin H., Jeng H.-T. & Bansil A. Thickness dependence of spin polarization and electronic structure of ultra-thin films of MoS2 and related transition-metal dichalcogenides. Scientific reports 4, 6270 (2014). [PMC free article] [PubMed]
  • Alidoust N. et al. . Observation of monolayer valence band spin-orbit effect and induced quantum well states in MoX2. Nat Commun 5 (2014). [PubMed]
  • Kośmider K., González J. W. & Fernández-Rossier J. Large spin splitting in the conduction band of transition metal dichalcogenide monolayers. Phys. Rev. B 88, 245436 (2013).
  • Kormányos A. et al. . k. p theory for two-dimensional transition metal dichalcogenide semiconductors. 2D Materials 2, 022001 (2015).
  • Zhang Y. et al. . Direct observation of the transition from indirect to direct bandgap in atomically thin epitaxial MoSe2. Nat Nano 9, 111–115 (2014). [PubMed]
  • Böker T. et al. . Band structure of MoS2, MoSe2, and α-MoTe2 angle-resolved photoelectron spectroscopy and ab initio calculations. Phys. Rev. B 64, 235305 (2001).
  • Dendzik M. et al. . Growth and electronic structure of epitaxial single-layer WS2 on Au(111). Phys. Rev. B 92, 245442 (2015).
  • Le D. et al. . Spinorbit coupling in the band structure of monolayer Wse2. Journal of Physics: Condensed Matter 27, 182201 (2015). [PubMed]
  • Cheng Y. C., Zhu Z. Y., Mi W. B., Guo Z. B. & Schwingenschlögl U. Prediction of two-dimensional diluted magnetic semiconductors: Doped monolayer MoS2 systems. Phys. Rev. B 87, 100401 (2013).
  • Baskin Y. & Meyer L. Lattice constants of graphite at low temperatures. Phys. Rev. 100, 544–544 (1955).
  • Brown A. & Rundqvist S. Refinement of the crystal structure of black phosphorus. Acta Crystallographica 19, 684–685 (1965).
  • Jiang Y. C., Gao J. & Wang L. Raman fingerprint for semi-metal Wte2 evolving from bulk to monolayer. Scientific Reports 6 (2016). [PMC free article] [PubMed]
  • Liu G.-B., Xiao D., Yao Y., Xu X. & Yao W. Electronic structures and theoretical modelling of two-dimensional group-VIB transition metal dichalcogenides. Chem. Soc. Rev. 44, 2643–2663 (2015). [PubMed]
  • Froehlicher G., Lorchat E. & Berciaud S. Direct versus indirect band gap emission and exciton-exciton annihilation in atomically thin molybdenum ditelluride MoTe2. Phys. Rev. B 94, 085429 (2016).
  • Miwa J. A. et al. . Electronic structure of epitaxial single-layer MoS2. Phys. Rev. Lett. 114, 046802 (2015). [PubMed]

Articles from Scientific Reports are provided here courtesy of Nature Publishing Group