|Home | About | Journals | Submit | Contact Us | Français|
RNA-based stable isotope probing (RNA-SIP) and metabolic profiling were used to detect actively glucose-consuming bacteria in a complex microbial community obtained from a murine model system. A faeces-derived microbiota was incubated under anaerobic conditions for 0, 2, and 4h with 40mM [U13C]glucose. Isopycnic density gradient ultracentrifugation and fractionation of isolated RNA into labeled and unlabeled fractions followed by 16S rRNA sequencing showed a quick adaptation of the bacterial community in response to the added sugar, which was dominated by unclassified Lachnospiraceae species. Inspection of distinct fractions of isotope-labeled RNA revealed Allobaculum spp. as particularly active glucose utilizers in the system, as the corresponding RNA showed significantly higher proportions among the labeled RNA. With time, the labeled sugar was used by a wider spectrum of faecal bacteria. Metabolic profiling indicated rapid fermentation of [U13C]glucose, with lactate, acetate, and propionate being the principal 13C-labeled fermentation products, and suggested that “cross-feeding” occurred in the system. RNA-SIP combined with metabolic profiling of 13C-labeled products allowed insights into the microbial assimilation of a general model substrate, demonstrating the appropriateness of this technology to study assimilation processes of nutritionally more relevant substrates, for example, prebiotic carbohydrates, in the gut microbiota of mice as a model system.
It is well documented that symbiotic gut inhabitants are required for maintaining host health and well-being [1, 2], as they greatly influence several host functions, not only those in the intestinal system [3–8]. Despite the rapid development of next generation sequencing technologies, which provide deep insight into the structure of the human microbiome , metabolically active populations in this complex community are still poorly described and incompletely understood. Hence, there is still a large knowledge gap of the in situ functionality of the gut microbiota and their metabolic capacities at an overall population level. To obtain a more complete picture and a better understanding of functional features of the gut microbiome in health and disease, we need to determine the in situ metabolic function of individual species within this complex microbial community.
Ingestion of prebiotic carbohydrates to boost health-promoting intestinal fermentation by selective enrichment and/or stimulation of the activity of commensal microorganisms that contribute to the well-being of their host is a viable strategy to improve host health through the benefits of microbial metabolism [9–11]. In particular short chain fatty acids (SCFA), such as acetate, propionate, and butyrate produced during microbial fermentation, have attracted attention in this regard. For instance, butyrate represents the main energy source for colonocytes , and anti-inflammatory and immune-modulating effects of butyrate have been observed [7, 13, 14]. However, knowledge about which microbial populations are stimulated by which carbohydrate under the in situ conditions of the human gastrointestinal (GI) tract or other intestinal (model) systems is limited. The ability to link specific nutrient metabolizing processes to distinct groups of intestinal microorganisms would greatly expand the understanding of the dynamics of prebiotic carbohydrate utilization and their fate in the large bowel.
The stable isotope probing (SIP) technology  is a means of identifying microorganisms associated with various assimilation and fermentation processes of highly isotope-enriched compounds in environmental samples [16–19]. RNA-SIP  offers the advantage of a rapid incorporation of the stable isotope (e.g., 13C) into the RNA by metabolically active microorganisms because of a high RNA synthesis rate . This 13C-enriched RNA (“heavy” RNA) can then be separated from unlabeled 12C background RNA (“light” RNA) using isopycnic density gradient centrifugation [21, 22]. Further molecular characterization of the 16S rRNA in the fractionated gradients links bacterial identity to metabolic activity. This technology has been applied to a few gut microbiota before, studying the utilization of simple and complex sugars [23–26], and it has been proven to provide an effective link between the identity of microorganisms and the metabolic assimilation of a particular substrate in situ. Otherwise, this information can only be indirectly inferred from traditional enrichment type studies using nonlabeled substrates. In addition, high pressure liquid chromatography coupled to isotope ratio mass spectrometry (HPLC-IRMS) is a valuable technique for tracking the 13C-label down into various metabolic products including volatile fatty acids [27–29]. Their quantification and isotopic composition provide additional insight into the functioning of microbial communities, as distinct populations can be linked to specific metabolic pathways [30, 31].
Animal models represent valuable and relatively easy accessible tools in gut microbiota research [32, 33]. In particular in vivo studies are important for studying basic aspects of digestion, such as the microbial assimilation of prebiotic carbohydrates, and help to unravel the functionality of the intestinal microbiota and to better understand its role in health and disease. Here, to the best of our knowledge, RNA-SIP was used for the first time in an intestinal environment of mice origin. In combination with metabolic profiling, bacteria being able to assimilate carbohydrates within a complex murine faecal microbiota cultured in vitro were identified. Using [U13C]glucose as a simple and quick fermentable model substrate, active glucose fermenters in the system were detected already after 2h of incubation. The detected 13C-labeled metabolic products corroborated the RNA-based sequencing results. Our study represents a “proof of principle” study establishing the use of RNA-SIP technology to interrogate samples of mice origin, which, to the best of our knowledge, has not been done before. Using this study as a starting point, future studies will address utilization of more complex carbohydrates, such as resistant starch (RS), by communities of mice origin in vivo to identify prebiotics assimilating bacteria directly in the intestinal environment.
C57BL/6J mice were raised at the animal facility at the University of Ulm under specific pathogen-free (SPF) conditions, receiving a standard laboratory diet and water ad libitum. Fresh faecal pellets were randomly collected from 12 healthy animals within 4h of excretion. The pellets of all animals were finally pooled and subsequently homogenized in M9 minimal medium  supplemented with thiamin (2mg/L) and Casamino Acids (1g/L), lacking glucose at this stage, to obtain a 15% (w/v) faecal slurry. Slurry material (1mL for each treatment) was mixed 1:1 with M9 minimal medium containing 80mM of [U13C]glucose (≥99 atom%) (Sigma-Aldrich GmbH, Steinheim, Germany), yielding a final concentration of 40mM glucose and 7.5% (w/v) of faecal material. Samples were incubated in individual 15 mL reaction tubes at 37°C for 0h (control), 2h, or 4h under anaerobic conditions, which were obtained by using airtight jars and AnaeroGen sachets (Merck, Darmstadt, Germany) resulting in a total of three different incubation treatments. Prior to use, the M9 minimal medium was filter sterilized, deoxygenated, and prewarmed to 37°C.
After incubation, microbial cells from each incubation were harvested by centrifugation for 20min at 4°C and 3220×g. Total RNA was extracted from 1mL of each sample using the PowerMicrobiome RNA Isolation Kit following the manufacturer's instructions (MO Bio Laboratories Inc., Carlsbad, USA). Residual genomic DNA was removed by incubating the RNA (100μL) for 1h at 37°C with 10μL RNase-free DNase I (10U/μL; Roche, Mannheim, Germany), 15μL of 10x DNase I buffer (400mM Tris-HCl, 100mM NaCl, 60mM MgCl2, 10mM CaCl2, pH 7.9), and 25μL of nuclease-free water. Further purification of the RNA samples was performed using Qiagen RNeasy spin columns (Qiagen, Hilden, Germany) according to the manufacturer's instructions. Subsequently, the RNA samples were quantified using a P360 Nanophotometer (Implen GmbH, Munich, Germany) and the absence of genomic DNA was confirmed by the absence of PCR products after amplification of 16S rRNA genes with universal primers 27F/907R [35, 36].
Gradient ultracentrifugation to density-resolve the extracted RNA was performed following the method used by Egert and colleagues  with some adaptations. The centrifugation medium contained cesium trifluoroacetate (CsTFA) stock solution (6.66mL; 2g/mL, GE Healthcare, Freiburg, Germany), gradient buffer (1.455mL; ) loaded with ~700ng RNA, and 0.285mL formamide (Roth, Karlsruhe, Germany). Subsequently, the density of the solution was checked using an AR200 digital refractometer (Reichert, Depew, NY, USA) and, if necessary, was adjusted to a refractive index of 1.3724 ± 0.0001, corresponding to a buoyant density (BD) of ~1.793g/mL, by adding CsTFA stock solution or gradient buffer. Fraction density and refractive index were correlated by means of a previously established calibration curve. Next, the gradient solution was added to 8 mL Quick-Seal Polypropylene tubes (BeckmanCoulter Inc., Krefeld, Germany) and spun at 20°C and ~123,100×g (45,000rpm) for 67h using an MLN-80 rotor  in an Optima MAX-XP bench-top ultracentrifuge (both BeckmanCoulter). After ultracentrifugation, gradients were fractionated into 16 equal fractions (~0.5mL) by displacement with water from the top of the tube under a consistent flow rate of 1mL/min using a syringe pump (World Precision Instruments, Berlin, Germany). An aliquot of 75μL of each harvested fraction was used to measure density using the refractometer. RNA from these fractions was then precipitated by adding one volume of ice-cold isopropanol, washed with 150μL ice-cold 70% ethanol, briefly air-dried, and finally redissolved in 20μL of nuclease-free water. The concentration of RNA in each fraction was determined using a RiboGreen low range assay (Life Technologies GmbH, Darmstadt, Germany) on a microplate reader (Tecan Group Ltd, Männedorf, Switzerland) and a total assay volume of 200μL according to the manufacturer's instructions.
Ten μL of RNA from each gradient fraction was reverse-transcribed to cDNA using the SuperScript VILO cDNA Synthesis Kit (Life Technologies GmbH, Darmstadt, Germany) following the manufacturer's protocol.
To reveal the microbial community structure represented in the cDNA from the different density gradient fractions, 16S rRNA gene amplicon libraries of the V3 and V4 regions of the bacterial 16S rRNA gene were prepared according to Illumina's 16S Metagenomic sequencing library preparation protocol  with minor modifications. In brief, for PCR amplification of the region of interest, the 16 rRNA gene specific primers forward S-D-Bact-0341-b-S-17 (5′-CCTACGGGNGGCWGCAG-3′) and reverse S-D-Bact-0785-a-A-21, (5′-GACTACHVGGGTATCTAATCC-3′) were used , added to an overhang adaptor sequence tail (TCGTCGGCAGCGTCAGATGTGTATAAGAGACAG and GTCTCGTGGGCTCGGAGATGTGTATAAGAGACAG), respectively. The PCR amplification mixture with a final volume of 50μL consisted of 0.5μL of each primer (50μM), 1μL of dNTP-Mix (10mM, of each), 1μL of BSA (20mg/mL), 5μL of 10x DreamTaq buffer (including 20mM MgCl2), 0.25μL of DreamTaq DNA-Polymerase (5U/μL), 39.75 of μL nuclease-free water, and 2μL of cDNA template. PCR reactions were performed in a T100 Thermal Cycler (Bio-Rad Laboratories, Munich, Germany) using the following profile: 3min at 95°C for initial denaturation, 25 cycles of 30s at 95°C for denaturation, 30s at 55°C for primer annealing, and 60s at 72°C for elongation, followed by a final elongation step for 5min at 72°C, yielding a PCR product of ~550bp. Water-template control reactions were included for each batch. PCR products were verified by standard agarose gel electrophoresis. Aliquots (22μL) of PCR product were subsequently purified with Agencourt AMPure XP beads (BeckmanCoulter Inc.) according to the Illumina library preparation protocol . Subsequently, a second PCR step was performed to anneal unique dual-index barcodes with Illumina sequencing adaptors to the amplicon target using the following reaction mixture in a total volume of 50μL: 5μL of Nextera XT Index 1 primer, 5μL of Nextera XT Index 2 primer (both from Nextera XT index kit; Illumina, Eindhoven, Netherlands), 5μL of PCR product, 1μL of dNTP-Mix (10mM, each), 5μL of 10x DreamTaq buffer (including 20mM MgCl2), 0.25μL of DreamTaq DNA-Polymerase (5U/μL), and 28.75μL of nuclease-free water. PCR was performed on a T100 Thermal Cycler (Bio-Rad Laboratories) using the following program: 3min at 95°C for initial denaturation, 8 cycles of 30s at 95°C for denaturation, 30s at 55°C for annealing, and 30s at 72°C for elongation and a final elongation period for 5min at 72°C. Afterwards, the libraries were subjected to bead-purification using Agencourt AMPure XP beads (BeckmanCoulter Inc.) according to the Illumina protocol . Prior to fluorometric quantification using the Qubit dsDNA HS assay kit (Life Technologies) and subsequent normalization to a final concentration of 4nM, the quality of each library (size ~630bp) was assessed using a Bioanalyzer DNA 1000 chip (Agilent Technologies GmbH, Waldbronn, Germany). Libraries were finally pooled in equivalent quantities and sequenced in duplicate on an Illumina MiSeq platform (Illumina) in a final concentration of 5.5pM with 15% control phiX added using the MiSeq Reagent Kit v3 in a 600-cycle (2 × 300bp) format (Illumina) following the manufacturer's instructions.
The sequencing data were processed with QIIME 1.8 . Overlapping paired-end Illumina fastq files were merged using the join_paired_ends.py script with default settings. Assembled sequences were quality filtered using a Q30 base call accuracy cut-off and allocated to their respective samples according to their unique barcode sequence. The demultiplexed sequences were then chimera checked using the USEARCH method against the Greengenes alignment (release GG_13_8). Sequences identified as chimeric were removed from subsequent analyses. Sequence reads were clustered into operational taxonomic units (OTUs) at 97% or greater similarity using the USEARCH method . Representative sequences were aligned with PyNAST against the Greengenes database (release GG_13_8) and assigned taxonomies using the Ribosomal Database Project (RDP) classifier . Alpha and beta diversity analyses were performed using the core_diversity_analyses.py script in QIIME 1.8. Alpha diversity was calculated through the phylogenetic metric PD_whole_tree (Faith's phylogenetic diversity estimate) using the value of the minimum number of reads (1008) across 10 iterations. Beta diversity was visualized using principal coordinate analysis (PCoA) of unweighted UniFrac phylogenetic distances.
Statistical analyses of the microbiota sequencing data were performed in R 3.0.2 . The results on the community composition and the corresponding statistical analysis were based on relative abundances averaged from the sequencing replicates for each fraction (except for fraction 3 of the 2h incubation, where only one sample was usable for sequencing). The differences in the mean relative abundance of bacterial taxa found in “heavy” and “medium” RNA-SIP fractions were assessed using one-way ANOVA. Differences in alpha diversity between “heavy” and “medium” fractions were analyzed using two-way ANOVA with time and density as factors. Differences with a p value < 0.05 were considered significant, while trends were defined as p > 0.05 but <0.10.
All sequencing data were submitted to GenBank and are publicly available under the accession number PRJNA340187.
Metabolite concentrations in the incubations were monitored using a high-performance liquid chromatography combustion isotope ratio mass spectrometer system (HPLC-C-IRMS) (Thermoquest, Bremen, Germany) as described previously [29, 44]. Concentrations and retention times of acetate, propionate, butyrate, and isobutyrate were determined by comparison with unlabeled standards. The isotopic signal of 13C/12C detected in the IRMS was calibrated with a CO2 gas standard, which was referenced against a methyl stearate working standard, which had been calibrated at the Max Planck Institute for Biogeochemistry, Jena, Germany (courtesy W.A. Brand).
The average density of the centrifugation gradients ranged from 1.743gmL−1 (fraction 16) to 1.84gmL−1 (fraction 1), which is in line with previous RNA-SIP studies and indicated an adequate density spectrum for efficient separation of isotope-labeled RNA [21–23, 25, 26]. Furthermore, the linear trend of the density spectrum indicated an appropriate gradient formation (Figure 1(a)). Based on the density, the gradients were further divided into “heavy” (BD 1.84–1.807gmL−1; fractions 1–5), “medium” (BD 1.801–1.781gmL−1; fractions 6–10), and “light” fractions (BD 1.777–1.743gmL−1; fractions 11–16) (Figure 1).
While a noticeable amount of unlabeled control RNA (0h) could be measured at averaged buoyant density (BD) between 1.796gmL−1 (fraction 7) and 1.761gmL−1 (fraction 14), the bulk of it accumulated in fraction 13, showing a BD of 1.767gmL−1 (Figure 1(b)). After 2h and 4h of incubation with [U13C]glucose, RNA could be detected at BD ranging from 1.814gmL−1 (fraction 4) to 1.761gmL−1 (fraction 14) (Figure 1(b)). The observed shift of RNA towards higher densities indicated a substantial incorporation of 13C-label into the RNA of glucose-utilizing bacteria already after 2h of incubation. With increased incubation time, the peak concentration of labeled RNA shifted back from fraction 7 (1.796gmL−1) to fraction 10 (1.781gmL−1) (Figure 1(b)), indicating a loss of label from the RNA.
The RNA distribution patterns throughout the different density fractions can be explained by glucose being rapidly fermented by many bacteria in the metabolically active community, leading to label incorporation into the RNA of all active bacteria present in the system. As a result, the 13C label could be found in a diverse range of RNA species at differing rates of incorporation, leading to accumulation of labeled RNA across a broad peak, designated as “medium” fractions at 2h. Over the course of incubation, the label appeared to be diluted through replacement by unlabeled carbon molecules present in the system, most probably as a result of general RNA turnover [24, 45], leading to a shift in the peak RNA concentrations towards lower density fractions. Additionally, the broad spectrum of other available, unlabeled carbon sources stemming from carbohydrates and proteins in the faecal material , the large number of active bacteria present in the system and the general nature of glucose as a simple sugar probably resulted in further dilution of the isotope-label . To ensure a significant and detectable 13C incorporation into the RNA, incubations in this study were conducted in minimal medium with 40mM [U13C]glucose. Glucose concentrations in a double digit mM range can still be considered physiological for intestinal environments [23, 46]. However, in a previous RNA-SIP study within an intestinal environment, glucose concentrations < 40mM did not lead to the production of sufficient labeled RNA for downstream analysis . For more complex sugars, such as prebiotic carbohydrates, lower substrate concentrations might probably be sufficient to recover enough 13C-labeled RNA, as a more specific utilization process by a limited number of microbial populations can be assumed .
16S rRNA from cDNA was amplified from selected gradient fractions with universal bacterial primers. Amplification of cDNA obtained from incubations for 2h and 4h with [U13C]glucose yielded strong PCR products in “heavy” gradient fractions (fractions 3–5, BD 1.82–1.807gmL−1, Figure 2), indicating an increased amount of 13C in the respective RNA. In contrast, amplicons from the unlabeled control cDNA (0h) were obtained from fraction 7 (BD 1.796gmL−1, Figure 2) to peak fraction 13 (BD 1.767gmL−1).
In order to identify the most active bacterial populations involved in glucose assimilation, fractions for sequencing-based community analyses were chosen based on the density-dependent distribution of RNA in the gradients. “Heavy” fractions (fractions 3–5 of the 2h and 4h incubations) contained a low but still PCR-detectable amount of isotope-labeled RNA and hence phylogenetic information about the most prolific glucose utilizer in the system. To identify these particularly active community members, the community structure in the “heavy” fractions was compared to the community structure of fractions showing peak concentrations of bacterial RNA, that is, fractions 6 and 7 for the 2h incubations, and fractions 9 and 10 for the 4h incubations, representing the majority of bacteria that became only slightly labeled by the added [U13C]glucose, that is, bacteria which were less active glucose assimilators.
Sequencing and quality-trimming of the processed RNA samples yielded a total of 75,389 reads, with a maximum of 6,703 and a minimum of 1,008 reads per sample. The obtained sequences were affiliated with eight phyla, 16 classes, 24 orders, 42 families, and 50 genera over all analyzed fractions.
A depth of coverage of about 1000 sequences per samples is suggested to deduce the prevalence of species at 1% abundance with good accuracy . Moreover, the aim of RNA-SIP studies is not to unravel the overall (and rare) diversity of an investigated habitat, but to identify microorganisms that have assimilated a labeled substrate by screening for differences in the relative abundances of microbial groups between isotope-labeled and unlabeled (or less labeled) RNA fractions. Clearly, results from our study showed the sequencing depth we obtained was sufficient to do so. Nevertheless, a higher sequencing depth might have yielded additional sequences of (rare) bacteria, which might have been involved in glucose assimilation, too.
The metabolically active bacterial populations were characterized by comparing the community structure in the “heavy” fractions of the 13C labeled samples to the majority of the community, which accumulated in the “medium” fractions. When applying unweighted UniFrac PCoA analysis, a distinct clustering of “heavy” fractions from the “medium” majority of the community and between the 2h and 4h incubations with [U13C]glucose was observed (Figure 3(a)). Analysis of the mean bacterial community composition in the “heavy” fractions of both the 2h and 4h incubations revealed a complex community structure consisting of many bacterial taxa (Figure 4), but which still had a significantly lower diversity (p < 0.01) than the bacterial community in the “medium” fractions (Figure 3(b)). Furthermore, a comparison between the “heavy” fractions of the 2h and 4h incubations revealed that the bacterial diversity in these fractions increased with incubation time (Figure 3(b)). Differential clustering of samples among the different density RNA-SIP fractions (Figure 3(a)) suggests a strong relation in qualitative terms . Because of the readily fermentable nature of glucose, a broad majority of the metabolically active bacterial community probably metabolized it quickly within 2h of incubation and sequestered the isotope-label into their RNA. However, the observed clear phylogenetic delineation of “heavy” fractions from the “medium” majority of the metabolically active RNA species (Figure 3(a)) clearly showed that a distinct subset of the bacterial population was able to use the glucose more rapidly, while the remaining bacteria used the glucose less effectively or obtained the 13C label by “cross-feeding” on the glucose utilizers or their metabolic by-products, indicated by the tendency of separated cluster formation of the “heavy” fractions between the 2h and 4h incubations (Figure 3(a)). This finding is further corroborated by a significant lower diversity found in the “heavy” RNA-SIP fractions compared to the diversity represented by the “medium” majority of the community (Figure 3(b)). Moreover, the increasing diversity in the “heavy” fractions after 4h of incubation (Figure 3(b)) suggests that more species were able to use the isotope-labeled glucose and/or its metabolites over time.
The microbial community composition before the incubation with glucose (0h control) was analyzed from three “light” RNA fractions where most RNA accumulated. This microbial community in the control sample could be assigned to the Firmicutes (87.3%), Bacteroidetes (9.6%), and Proteobacteria (2.2%), representing the most abundant phyla. The most dominant taxa (≥1% relative abundance) within the Firmicutes, classified to the most detailed taxonomic level available, were unclassified Lachnospiraceae (43.8%), unclassified Clostridiales (12.6%), unclassified Ruminococcaceae (9.8%), Lactobacillus (9%), Dorea (3.4%), Oscillibacter (2.6%), Allobaculum (1.4%), and Butyricicoccus (1.2%). Among the Bacteroidetes, unclassified Porphyromonadaceae (6.9%) and Barnesiella (1.6%) represented the largest groups. Unclassified Desulfovibrionaceae (1.3%) were the largest group within the Proteobacteria. The phyla Actinobacteria, Tenericutes, Verrucomicrobia, and TM7 showed a low relative abundance (<1%). A small proportion (0.5%) of the total community was defined as unclassified Bacteria (Figure 4). The dominance of the phyla Firmicutes, Bacteroidetes, and to a lesser extent Proteobacteria is in good agreement with community compositions reported in other mice faecal 16S rRNA sequencing studies [49–53].
The most metabolically active bacterial populations were determined by comparing the relative abundance of individual taxa in the “heavy” fractions of the 13C-labeled sample to that in the “medium” fractions. After 2h of incubation with [U13C]glucose, the bacterial genus which differed most prominently between the different density fractions was Allobaculum, which was over 3-fold more abundant in the “heavy” RNA-SIP fractions than in the “medium” fractions (Table 1). Among the less abundant taxa, Parabacteroides showed a tendency to accumulate in the “heavy” fractions (Table 1). The observed increases were linked to a significant drop (p < 0.05) in proportions of the abundant unclassified Lachnospiraceae, unclassified Porphyromonadaceae, unclassified Ruminococcaceae, Dorea, and unclassified Desulfovibrionaceae, compared with their relative abundance in the “medium” fractions (Table 1). The unclassified Clostridiales tended to be found (p < 0.1) in reduced numbers in the “heavy” fractions. The most significant decrease (p = 0.001) was observed for the genus Akkermansia. Approximately 10-fold fewer sequences of this genus were detected in “heavy” RNA-SIP fractions than in the “medium” counterpart fractions, although the overall relative abundance of this taxon was low (<1%).
However, after 4h of incubation with [U13C]glucose, the diversity of bacteria relatively enriched in the “heavy” fraction was increased compared with the diversity after 2h of incubation. The genus that showed the most prominent tendency to accumulate in “heavy” fractions was Butyricicoccus (p < 0.1) (Table 1). Among the most abundant taxa, Allobaculum, unclassified Ruminococcaceae, and to a lesser extent Dorea were found in higher numbers in “heavy” fractions, which showed that the unclassified Ruminococcaceae and Dorea increased their representation in the “heavy” fractions from that at 2h [U13C]-incubations (Table 1). Noticeably, Akkermansia was also found with an almost 4-fold increase in proportion in “heavy” fractions at 4h compared with 2h (Table 1). The global increases observed in the “heavy” RNA-SIP fractions corresponded to a significant proportional reduction of unclassified Firmicutes, unclassified Bacteria, and unclassified Bifidobacteriaceae (p < 0.01) (Table 1). Among the most abundant taxa, Lactobacillus, unclassified Lachnospiraceae, and unclassified Clostridiales showed reduced proportions.
The proportion of Allobaculum, a genus of the Erysipelotrichi class, was significantly higher in the “heavy” RNA-SIP fractions, indicating that the members of this genus could benefit the most from the excess glucose in the system, indicated by rapid label incorporation into their RNA. Interestingly, Allobaculum has also been found in increased numbers in prebiotic (oligofructose) treated mice in combination with a HFD (high-fat diet) but was reduced in HFD treatment lacking the prebiotic . Moreover, in a study by Turnbaugh and colleagues, an increased relative abundance of the Erysipelotrichi class (comprising organisms closely related to Clostridium innocuum, Eubacterium dolichum, and Catenibacterium mitsuokai) was linked to the consumption of a Western diet (high-fat/high sugar) in mice containing a humanized gut microbiota . Phylogenetic analysis of Allobaculum stercoricanis revealed that this organism is nearest phylogenetically related to members of Clostridium rRNA cluster XVI , which also includes Clostridium innocuum and Eubacterium dolichum [57, 58]. Based on these findings, we hypothesize that Allobaculum species are optimized for energy harvesting, as we have shown that it consumes simple sugars faster, and its relatives are linked to an adiposity-favouring microbiota . Admittedly, it cannot be fully excluded that some inherent features of the Allobaculum RNA might be responsible for its higher relative abundance in the “heavy” fractions. Therefore, future studies might include additional 12C-controls to substantiate this finding. Nevertheless, Allobaculum was the only genus which showed significantly (p < 0.05) increased relative abundances in the “heavy” fractions after 2h of incubation, whereas several other related low GC Gram-positive bacteria, such as the abundant Lachnospiraceae [59, 60], showed significantly reduced amounts there. Therefore, we are confident that the significant enrichment of Allobaculum RNA in “heavy” fractions can be attributed to an isotopic enriched RNA rather than to its native RNA BD, which is based on the low GC-content of the DNA of 37.9mol% .
The genus Akkermansia was significantly less represented in the “heavy” fractions, indicating less glucose consumption than that by the other bacteria present in the system. This is consistent with Akkermansia muciniphila being adapted to a very specific ecological niche and using a very specific energy source, that is, mucin . Hence, it is reasonable to assume that Akkermansia was probably less competitive for glucose than many other bacteria present in the community. Interestingly, a recent study also showed that this genus grows relatively poorly on glucose .
In the incubations with 40mM [U13C]glucose, HPLC-IRMS analysis revealed 13C-labeled lactate, acetate, propionate, and butyrate as the main metabolic products; isotope-labeled isobutyrate was also measured, but in lower amounts (Figure 5). These products equated to 72.8% of the total added glucose carbon, while 47.4% of this recovered carbon was labeled with 13C. Lactate and SCFA which were detected already at the beginning of the incubations most probably stemmed from the inoculum, that is, the fresh faecal material. A more than 10-fold increase in total lactate concentration was determined after 2h of incubation. Acetate, the most abundant SCFA present in human faeces [63, 64], only slightly increased during the course of incubations, whereas the concentrations of propionate and butyrate doubled (Figure 5(a)). Isobutyrate was detected only in low concentrations in fresh faecal slurry (0h) (Figure 5(b)). After 2h of incubation with [U13C]glucose, the 13C content of lactate, acetate, propionate, and butyrate reached 79.7, 52.6, 49, and 35 atom percent excess (APE) of the respective carbon-pools. These fractions remained approximately constant at 83.7, 55.2, 48.5 and 42.6 APE, after 4h of incubation, respectively (Figure 5(a), stripes), suggesting that glucose was exhausted by 2h and further fermentation was minimal. In the case of isobutyrate, 13C-enrichment increased to 40 APE and 44.5 APE after 2h and 4h of incubation in the presence of the isotope-label, respectively (Figure 5(b), stripes).
In this study, 40mM of [U13C]glucose was rapidly fermented (within 2h of incubation), yielding particularly lactate and acetate, and in addition to a lesser extent propionate and butyrate, as the main fermentation products. The profile of fermentation products corresponded to the composition of the microbial community. For example, many bacteria form lactic acid from glucose, including Lactobacillus spp., a well-known genus of the lactic acid bacteria [63, 65, 66], which occurred in relatively high abundances (up to 14.44%). The Bacteroidetes phylum was abundantly represented in the community by unclassified Porphyromonadaceae and Barnesiella representatives, which are associated with the production of acetate and propionate [66, 67]. Furthermore, several members of the abundant Lachnospiraceae family (Clostridium cluster XIVa) are known butyrate-producing species , and some of these have been linked to the conversion of lactate to butyrate . The abundant genus Allobaculum, identified here as the most active glucose utilizer in this system, has been shown to yield mainly lactate and butyrate during glucose metabolism .
Our observation that significant proportions of the 13C label were found in lactate, acetate, propionate, and butyrate shows that the predominant carbon source used by the microbes was the isotope-labeled glucose. In particular, the high proportion of 13C label found in lactate (83.7 APE after 4h) indicates that formation of lactate occurred predominantly from the [U13C]glucose (≥99 atom%) and only to a small extent from other unlabeled sources in the faecal material. Similarly, formation of acetate, propionate, and butyrate (all around 50 APE) occurred from glucose, albeit with a relatively larger contribution of other unlabeled sources. However, formation of these acids would also be conceivable from the labeled lactate [63, 68, 69], which was highly enriched with 13C. Moreover, more than 10-fold increase in produced lactate indicated a rapid fermentation and cycling of carbon through glycolysis [66, 70].
Interestingly, a loss of unlabeled acetate was observed during the course of incubation, since the total concentrations of acetate remained approximately constant, but became largely 13C-labeled (≥52.6 APE) with time. It might be speculated that conversion of acetate into butyrate via the butyryl-CoA CoA-transferase pathway occurred in the system . This assumption is in line with the detection of increased, but still low, butyrate concentrations. In addition, acetate might have been converted to CO2 and CH4 by anaerobic microbial respiration (denitrification, desulfurication, and methanogenesis). However, we neither measured the respective metabolites nor specifically determined the relevant microbial populations in our samples to substantiate this hypothesis. Notably, Desulfovibrionales (comprising species capable of acetate-dependent desulfurication) were present in the samples investigated here , and acetoclastic archaea (Methanosarcina spp.) have been found in the faeces of herbivorous animals and ruminants [73, 74].
The branched-chain SCFA isobutyrate showed a greater than 10-fold increase in concentration at 4h, indicating amino acid fermentation in the system [75, 76]. However, isotope enrichments of 44.5 APE were seen for isobutyrate at 4h. Isobutyrate synthesis is formed from the degradation of valine . Valine's original biosynthetic precursor is pyruvate. Highly 13C-enriched (>83.7 APE) pyruvate will occur in this system, as proven by the magnitude of 13C lactate (26.5mM with 83.7 APE). Therefore, we estimate that the concentration of labeled valine arising from pyruvate is likely to be sufficient to provide for the small concentration (1.1mM with 44.5 APE) isobutyrate measured. Furthermore, as there is no difference between the rates of valine degradation from within protein (albumin) or the free amino acid to isobutyrate by faecal microbiota in vitro , we hypothesize that the 13C-isobutyrate detected here may indicate “cross-feeding” upon valine or valine-containing proteins of [13C]glucose origin in this system.
In this study, we demonstrated that RNA-SIP in combination with metabolic profiling of 13C labeled fermentation products offers an efficient approach to link the identity of bacteria to their metabolic function and the metabolic by-products they produce. Insights into the metabolic activity of a complex microbial community of mice origin were gained using glucose as a model substrate. We have shown that a wide range of bacteria were active after glucose addition, which is not surprising as glucose is an easily fermentable energy source. Nevertheless, our data showed that distinct members of the faecal community were able to use the glucose more efficiently than others. Using mice as a model system is still considered as a powerful tool in microbiota research, as the microbiota can be investigated under controlled conditions (e.g., homogenous genetic background of the mice, consumed diet, and housing factors) . Furthermore, the high similarity of the bacterial taxa and many anatomical similarities between mouse and the human digestive tract [32, 33] indicate that mice models are valid in human-associated microbiome studies. We will use the mouse system in future RNA-SIP studies to examine resistant starch utilization in vitro, followed by an in vivo feeding trial.
The authors gratefully thank Peter Claus for HPLC-IRMS analysis. They also thank Ron Ronimus and Matthew Barnett for reviewing the manuscript. This study was funded by the “Innovative/Cooperative Projects” program of the German federal state of Baden-Württemberg (Project Präbio-SIP).
The funders had no role in the study design, data collection and analysis, manuscript preparation, or decision to publish.
The authors declare that they have no competing interests.
Elena Herrmann, Christian U. Riedel, and Markus Egert conceived and designed the experiments. Elena Herrmann and Verena Reichert-Grimm performed the experiments. Elena Herrmann, Wayne Young, and Douglas Rosendale analyzed the data. Elena Herrmann, Wayne Young, Douglas Rosendale, Christian U. Riedel, Ralf Conrad, and Markus Egert wrote the manuscript.