PMCCPMCCPMCC

Search tips
Search criteria 

Advanced

 
Logo of scirepAboutEditorial BoardFor AuthorsScientific Reports
 
Sci Rep. 2016; 6: 28157.
Published online 2016 June 20. doi:  10.1038/srep28157
PMCID: PMC4913347

Key diffusion mechanisms involved in regulating bidirectional water permeation across E. coli outer membrane lectin

Abstract

Capsular polysaccharides (CPSs) are major bacterial virulent determinants that facilitate host immune evasion. E. coli group1 K30CPS is noncovalently attached to bacterial surface by Wzi, a lectin. Intriguingly, structure based phylogenetic analysis indicates that Wzi falls into porin superfamily. Molecular dynamics (MD) simulations further shed light on dual role of Wzi as it also functions as a bidirectional passive water specific porin. Such a functional role of Wzi was not realized earlier, due to the occluded pore. While five water specific entry points distributed across extracellular & periplasmic faces regulate the water diffusion involving different mechanisms, a luminal hydrophobic plug governs water permeation across the channel. Coincidently, MD observed open state structure of “YQF” triad is seen in sugar-binding site of sodium-galactose cotransporters, implicating its involvement in K30CPS surface anchorage. Importance of Loop 5 (L5) in membrane insertion is yet another highlight. Change in water diffusion pattern of periplasmic substitution mutants suggests Wzi’s role in osmoregulation by aiding in K30CPS hydration, corroborating earlier functional studies. Water molecules located inside β-barrel of Wzi crystal structure further strengthens the role of Wzi in osmoregulation. Thus, interrupting water diffusion or L5 insertion may reduce bacterial virulence.

Capsules are major virulent determinants of Gram-negative bacteria involved in the evasion of host immune response1,2,3,4. They are linear or branched high molecular weight capsular polysaccharides (CPSs), typically in the order of 104–105 Da that are covalently or noncovalently attached to the bacterial surface1. With the emergence of multidrug resistance and the dearth of new antibiotics to combat bacterial infections, capsules have become a novel target for antibacterial drugs5. Escherichia coli (E. coli), a Gram-negative bacteria, synthesizes group1 K30CPS by a Wzy polymerase dependent pathway, wherein, the tetrasaccharide repeat is biosynthesized in the cytoplasm, polymerized in the periplasm and transported to the cell exterior in a stepwise manner through a supramolecular assembly6,7. K30CPS is anchored noncovalently to the bacterial surface by an outer membrane lectin, Wzi8,9,10,11. However, the surface expression and anchorage mechanisms of K30CPS still remain unclear.

Here, we aim to explore the conformational dynamics of Wzi to facilitate the understanding of K30CPS binding onto Wzi, an 18-stranded antiparallel β-barrel protein. Most interestingly, structure based phylogeny shows that it falls into porin superfamily. To further understand the functional role of Wzi, beyond being a lectin, we performed molecular dynamics (MD) simulations of Wzi and its mutants embedded in palmitoyloleoylphosphatidyl ethanol (POPE)/Palmitoyloleoylphosphatidyl glycerol (POPG) lipid bilayer hydrated in explicit solvent. We have shown here for the first time that Wzi can also act as a bidirectional passive water specific transporter with a diffusion permeability (pd) of 2.8×10−15 cm3.s−1, suggesting that it may play a role in osmoregulation. Strikingly, this is the first β-barreled porin found to be specific for water molecules owing to its narrow lumen.

We have identified that conserved residues at five different diffusion points of the extracellular and periplasmic faces of the barrel along with a conserved luminal hydrophobic plug play a key role in regulating Wzi water diffusion. At each entry point, water selective hydrogen bonding network regulates both water entry and exit. Three points at the extracellular side and two at the periplasmic side are found to be involved in regulating the water entry and exit through the barrel. At the periplasmic region, ‘RED’ motif acts as a major exit and entry point. At the extracellular side, while major contribution to barrel entry is through the notch region involving ‘NQQ’ motif, exit is equally through notch region and ‘YQF’ motif. Intriguingly, such a ‘YQF’ motif is observed in sodium-galactose cotransporters12,13, implicating that it may be the binding site of K30CPS. Thus, the dual role for ‘YQF’ triad, as a water entry point at the extracelluar side and as a K30CPS anchorage point, is revealed. Results also offer stereochemical rationale for previous experimental data on the functionality/non-functionality of three H1 helix mutants8. This can be attributed to the observed change in the water conduction pattern or additional water entry point at the periplasmic end, corroborating the porin-like function of Wzi. As CPS is highly hydrated in nature, we envisage that Wzi may have to conduct water so as to keep the CPS in a hydrated condition. Diffusion of water molecules in and out of Wzi may be driven by the extracellular concentration of CPS.

Results also pinpoint conserved electrostatic, hydrophobic and hydrogen bonding interactions between extracellular L5 residues and the lipid bilayer which play an important role in the insertion of Wzi onto the membrane. Thus, a drug molecule that can either interfere with the water transport of Wzi or the attachment of K30CPS to ‘YQF’ or with its insertion onto the membrane may aid in reducing the bacterial virulence.

Results

Wzi falls into porin superfamily

As the similarity between β-barrel motif of Wzi and porins offers a clue to an additional functional role for Wzi apart from being a lectin, we have constructed a structure based phylogenetic tree (SBPT). To our surprise, results show that Wzi comes under outer membrane transporter superfamily (Fig. 1) by sharing similarity mostly with porins, in spite of high divergence at the sequence level (1–12%). In fact, such a dual function of Wzi was not realized eariler and it was emphasized to be a lectin8.

Figure 1
Structure based phylogenetic tree indicating Wzi as a porin.

MD simulations carried out to further establish the functional role of Wzi (Fig. 2A,B) as a porin clearly indicates that water molecules gradually enter into the Wzi (herein onwards Wzi-WT) through both the periplasmic and extracellular regions and the lumen of the barrel is completely filled with the water molecules ~60 ns (Fig. 2C,D, Supplementary Movie S1). Number of water molecules within the lumen of Wzi increases steeply to ~100 over ~12 ns and gradually to ~150 during ~12–30 ns and finally stays ~150 during the rest of the simulation (Fig. 2C). Water enters into the barrel through 3 different points at the extracellular side involving conserved Y380, Q102 & F427 (marked as 1 in Fig. 2A), N153, R190, P191, N226, Q227 & Q378 (marked as 2 in Fig. 2A) and T105, Q107, Q437, W455 & T457 (marked as 3 in Fig. 2A) residues (Fig. S1).

Figure 2
Water diffusion into E. coli outer membrane lectin, Wzi.

Likewise, at the periplasmic side, water enters into the barrel through 2 different points that are located at the interspace of the β-barrel and α-helical bundle (marked as points 4 & 5 in Fig. 2A). While water entry at point 4 is regulated through H1, H3 & β-barrel encompassing residues D32, R84, R93 & E474, water flow through point 5 takes place at the interface of the turn connecting H1 & H2 and the β-barrel, involving residues D42, K301, E303, H338, H47, P215, Q247 & S244. Note that the residues involved in water passage at both the periplasmic entry points are highly conserved (Fig. S1).

Bidirectional water permeation across Wzi

Intriguingly, complete crossing of water molecules across the barrel, from the extracellular side to the periplasmic side (Fig. 3B, Supplementary Movie S2) and vice versa (Fig. 3C, Supplementary Movie S3), following a nonspecific pathway is also observed. Over the last 200 ns of the simulation, 17 water molecules from the periplasmic side and 21 water molecules from extracellular side cross the Wzi barrel. Such a small difference in number of water permeation events across the barrel can be attributed to the availability of a wider space on either side of the hydrophobic plug, permitting the water molecules to follow a nonspecific path. Eventually, this reflects in the time taken by the water molecules to diffuse the barrel: 8–80 ns (extracellular to periplasmic) and 6–67 ns (periplasmic to extracellular). The net flux, which is calculated just by considering the water molecules entering and exiting at the 5 water entry/exit points (See Methods for details), also remains nearly zero (0.05/ns), thus, reflecting the equilibrium state. This also reflects in the retention of total number of water molecules inside the barrel (154 ± 12/ns). Diffusion permeability (pd)14 is calculated to be 2.8 × 10−15 cm3.s−1.

Figure 3
Water permeation across Wzi.

Mechanisms of bidirectional water diffusion into Wzi

Water diffuses into the barrel in a highly regulated manner mediated by hydrogen bonding interactions both at the extracellular and periplasmic sides through the 5 different water conduction points as detailed below.

Water diffusion through extracellular-entry points

Tyr…Gln hydrogen bond mediated water entry: Initial diffusion involving point 1 takes place around 5 ns through the interface between Phe(F427) and Tyr(Y380) & Gln(Q102) residues that are in hydrogen bond “locked” state (Fig. 4A). During the “locked” state, side-chains of Y380 (OH) & Q102 (NE2 and/or OE1) are engaged in hydrogen bonding interaction and stalls the water entry into the barrel till 16 ns. Subsequently, the pore gets unlocked and water enters into the channel. This can be visualized from increase in OH(Y380)…NE2(Q102) and OH(Y380)…OE1(Q102) distances to above 5 Å (Fig. 4A–C). Such locking and unlocking of the pore is observed frequently through out the simulation and regulate the water entry into the channel. YQF facilitates the entry of 23 water molecules into the barrel and permeation of 9 water molecules across the barrel during the last 200 ns. This water entry mechanism is highly conserved with the normalized frequency (NF) of 1. It is noteworthy that in the crystal structure (PDB ID: 2YNK), entry point 1 is locked by shorter OH(Y380)…NE2(Q102) (distance = 2.7 Å) and OH(Y380)…OE1(Q102) (distance = 3.9 Å) distances in contrast to the pore opened state seen during the simulation (Fig. S2). Thus, hydrogen bond between Y & Q acts as a lock for water diffusion into the barrel through YQF. Strikingly, YQF triad seen here is structurally similar to the one that is found in the sugar binding site of sodium-galactose cotransporters (Fig. 4D).

Figure 4
Extracellular ‘YQF’ mediated water difussion.

Water diffusion through Asn…Gln hydrogen bond network: Water entry via the notch is regulated by the pore formed by the extracellular residues, Asn(N153), Arg(R190), Pro(P191), Asn(N226), Gln(Q227) & Gln(Q378) that is in closed state (point 2, Fig. 5A). As a water molecule approaches the notch region, it hydrogen bonds primarily with N226/Q227/Q378 (‘NQQ’ motif) by forming a pore and further diffuses into the channel involving N153, R190 & P191. After the water moves into the barrel, the pore again enters into the closed state as found in the crystal structure and can be visualized in Fig. 5A. Thus, the pore opening and closing involve side chain rearrangement of the aforementioned residues and facilitate water diffusion through point 2. Such water entry mechanism is highly conserved (NF = 0.87). Through this mechanism, 84 water molecules enter into the barrel that is ~3.5 times higher compared to entry point 1 and contributes to the diffusion of 12 water molecules to the periplasmic side.

Figure 5
Water diffusion mechanisms.

Threonine flipping: At the entry point 3, water diffusion happens through hydroxyl group flipping (NF = 0.92) of T457 (Fig. 5B). The mechanism is such that, when a water molecule enters into the channel, the hydroxyl group of T457 side chain hydrogen bonds with the water molecule and pushes it inside the channel by flipping. It then breaks the hydrogen bond with T457 and slides into the channel through aromatic W455. Other amino acids that facilitate the consequent movement of water inside the barrel are T105 & Q107. Entry point 3 participates in entry of 11 water molecules into the barrel that is significantly lower compared to entry point 2 (~9 times).

Role of charged amino acids in periplasmic water entry

Besides the water diffusion into the barrel from the extracellular side, water also diffuses from the periplasmic side of barrel during the simulation through 2 different entry points.

Regulation of water diffusion through bifurcated salt bridge: At the entry point 4a of the periplasmic side, water regulation is mediated by R93 & E474 of the β-barrel and R84 of H3 that together form bifurcated salt bridge. When a water molecule appears in the vicinity of these residues, it hydrogen bonds alternately with the amino groups of R84 & R93 and carbonyl group of E474 and invades slowly into the barrel without disrupting R93 & E474 and R84 & E474 salt bridges (NF = 1) (Fig. 5C). A second entry point (denoted as 4b) located adjacent to R84 & E474, involves D32 of H1 (‘RED’ motif) that forms a hydrogen bond with the water molecule and pushes it inside the barrel (NF = 1) (Fig. 5D). Entry points 4a and 4b together contribute to water entry through point 4. However, water entering through point 4b is predominant (50 water molecules) compared to 4a (4 water molecules). Entry point 4 transports 17 water molecules to extracellular side.

Water entry through negatively charged periplasmic residues D42 & E303: Water entry through point 5a at the periplasmic side (Fig. 5E) is initiated by the attachment of water oxygen to carboxylic group of Glu303, a barrel residue, through hydrogen bonding interaction. Upon discharging from this hydrogen bond, it moves into the barrel by networking with Asp42 (helix 1), Lys301 (barrel) and H338 (barrel). This mechanism is highly conserved with NF = 1. Number of water molecules enter through point 5a (15 molecules) is significantly lower than the point 4b (50 molecules).

Water entry through H47-P215-Q247 triad: Point 5b at the periplasmic side favors only 2 water entries into the barrel (Fig. 5F) through a pore encompassing the barrel loop residues H47-P215-Q247 (Fig. 5F). This is initiated by a hydrogen bond formation between the water molecule and the side chain amino/carbonyl group of Gln247. Subsequently, the water moves inside the barrel by establishing hydrogen bond with backbone carbonyl group of H47 and OH of S244 (NF=1).

Barrel water exit mechanisms

Extracellular water exit: Not surprisingly, mode of water exit at the extracellular side involves same residues as the water entry (Fig. S3). At the extracellular side, both points 1 & 2 act as the major outlet by promoting the exit of 46 & 41 water molecules respectively. This is significantly higher compared to point 3 that exits only 6 water molecules.

Periplasmic water exit: Among the periplasmic entry points 4a & 4b, the latter promotes (32 water molecules) more water exit compared to the former (7 water molecules). Points 5a & 5b contribute more towards water exit (31 & 18 molecules respectively) compared to the entry (15 & 2 molecules respectively).

Eventually, the extracellular and periplasmic residues that are involved in water entry are involved in exit also (Fig. S3).

Formation of transient water diffusion wires

Development of transient water wires (Fig. S4) associated with aforementioned water diffusions (both entry & exit) are observed at each diffusion point (Fig. 3A). As the water entry & exit happens at random time intervals due to the varying residence time of the water molecules inside the barrel, both of them simultaneously contribute to the formation of the water wires. Breakage in these transient water wires is observed based on the entry & exit of the water molecules. A single water wire is observed in all the diffusion points except at the extracellular point 1, wherein, it accommodates 2 transient wires.

Lumen hydrophobic plug plays a key role in regulating Wzi water conduction

A hydrophobic plug present at the barrel center and protruding towards the lumen, governs the water transport across the channel. The plug encompasses conserved aromatic residues (Fig. S1) W174 & W175 of L3, F109 of L1 and W53 that is part of the connecting loop between periplasmic α-helices H1&H2 along with nonaromatic hydrophobic residues (Ala, Val, Leu and Ile). It eventually narrows down the channel at the center and confines the movement of water molecules inside the channel through a specific path. This can be clearly seen in Fig. 3A, wherein, the water molecules entering from multiple diffusion points from the periplasmic (2 diffusion points) and extracellular (3 diffusion points) sides merge at the region in between the hydrophobic plug and the β-barrel. Thus, the hydrophobic plug acts as a junction for the water molecules entering from both the sides.

Pentaglycine mutants at the periplasmic end of helix H1 alter water diffusion pattern

To elucidate the reason behind experimentally observed difference in the functional/nonfunctional forms of pentaglycine helix H1 mutants8, viz., H1mut1 (residues 32–36 mutated to Gly), H1mut2 (residues 35–39 mutated to Gly) and H1mut3 (residues 39–43 mutated to Gly), MD simulations have been carried out for these mutants. Strikingly, water diffusion patterns of H1mut1, H1mut2 & H1mut3 are quite different from that of Wzi-WT (Fig. 6). In fact, the number of water molecules at the interface of helix H1 and the beta barrel is significantly altered between different mutants, due to the absence of longer side chains in H1mut2 (W39) and H1mut3 (W39 & R42) (Fig. 6, Left). While the nondeleterious H1mut1 is able to retain the number of water molecules at the H1-barrel interface same as that of Wzi-WT, H1mut2 & H1mut3 exhibit significant difference. This is due to the fact that the pentaglycine mutation is located inside the barrel for H1mut1 (Fig. 6B), while it is located at the periplasmic surface for H1mut2 (Fig. 6C) & H1mut3 (Fig. 6D). In H1mut2, significant movement in H1 is observed and as the result, it accommodates more water molecules at the H1-barrel interface. Thus, the water diffusion pattern of H1mut2 is different from Wzi-WT (Fig. 6C). In H1mut3, as one of the glycine mutation overlaps with the entry point 5b residue (Asp42), the water diffusion pattern is altered (Fig. 6D). Interestingly, there is an additional entry point seen at the interface of H1 and entry point 5b, when 5b enters into the closed state. Such additional entry point is not observed in Wzi-WT. Thus, it is clear that H1mut2 & H1mut3 have different diffusion patterns compared to the Wzi-WT. These differences may significantly affect water conduction across the channel under osmotic stress. This may be the reason for their deleterious nature in sharp contrast to the nondeleterious H1mut1 that maintains similar diffusion characteristics as that of Wzi-WT.

Figure 6
Comparison of water diffusion patterns in Wzi-WT and three helix H1 mutants.

It is noteworthy that all the above pentaglycine mutants retain their α-helical conformation (Fig. S5). This is in line with an earlier study, which shows that tri- and hexa- glycine can adopt α-helical conformation15.

Ion binding pocket at the extracellular side

Another important observation is the tight association of a positively charged potassium ion onto the extracellular surface of Wzi. The ion starts entering into lumen ~58 ns by coordinating with the side chain carbonyl group of Q102 and through subsequent conjoint coordination with the hydroxyl group of Y380. It further moves inside the channel at the interspace between F427 & Y380…Q102 of ‘YQF’ triad (Fig. 7A) coinciding with water diffusion point 1 (Fig. 4). The ion interacts with the aromatic side chains of Y380 & F427 through coordination bond and cation…pi interactions respectively and subsequently, coordinating with the carbonyl oxygens of Q107, E180, D187 and A385 in an alternating fashion (Fig. 7A,B). The water shell surrounding the ion in bulk solution is partially stripped off as it enters the protein (Fig. 7B) and the dehydration energy is compensated by interaction with carbonyl oxygens of the ion binding pocket residues. Thus, the ion maintains an average coordination number of ~7 (Fig. 7C), coordinating with water molecules alone at the beginning and then with both water and protein as it enters into the pocket. A shorter distance of ~5 Å between the ion and the backbone carbonyl oxygens of E180 and Q107 beyond ~60 ns indicates the strong association of the ion with the binding pocket (Fig. 7D).

Figure 7
Extracellular ion binding pocket of Wzi.

Role of extracellular loop L5 in membrane insertion

Wzi-WT simulation indicates that L5 is not involved in the water conduction pathway. However, it plays a major role in membrane insertion. Though the L5 residues are initially aligned close to the barrel and are not involved in any interaction with the membrane (Figs 2B and and8A),8A), they slowly splay out during the simulation by undergoing large conformational changes and insert into the membrane ~50 ns (Fig. 8A and Movie S4). This is facilitated by complete burial of residues 266–276 onto the membrane surface. One among the key interactions involved in the anchorage of the protein into the membrane is the hydrophobic interaction mediated by highly conserved W259, E266, F271&W272 (Fig. 8B) and semiconserved L268 (Fig. 8B & S1) residues. It is noteworthy that L268 is replaced by F268 in some species, which can also participate in such hydrophobic burial. Another important interaction that facilitates membrane insertion is the electrostatic interaction between the positively charged amino head group of POPE and negatively charged carboxylic group of conserved D273&D279 (Fig. 8B (Inset)). Hydrogen bonding interaction between side chain hydroxyl group of conserved S267 & phosphate oxygen of POPE and the head group of POPE & carbonyl group of G274 also participate in this anchorage.

Figure 8
Role of extracellular loop 5 (L5) in membrane insertion.

Discussion

We have shown here for the first time through structure based phylogeny and MD simulations that E. coli outer membrane lectin, Wzi also functions as bidirectional water selective porin, offering justification for its β-barrel fold. Note that although Wzi is specific for water conduction like aquaporins, both are structurally very different, as the latter possesses an alpha helical structure.

Five water diffusion points are identified (two at the periplasmic and three at the extracellular sides), through which, the water entry/exit from extracellular & periplasmic sides occur in a highly regulated manner in Wzi (Figs 3, ,4,4, ,5,5, S3 & S4). These mechanisms aid in retaining the total number of water molecules inside the barrel ~150 and facilitate complete crossing of water molecules across the channel by passive diffusion. Nonetheless, water-crossing time varies even through the same diffusion point, as the water molecules don’t take up a specific transportation pathway due to the wider lumen. Diffusion permeability of Wzi is estimated to be 2.8×10−15 cm3.s−1 that is 2 times lower than that of aquaporin monomers as reported in previous MD simulations14,16.

A novel ‘YQF’ triad motif located in the extracellular side is identified to be one of the major diffusion points (Fig. 4). Notably, a similar triad is found in the water and sugar entry path of sodium-galactose cotransporter (SGLT) (PDB ID: 3DH417) that is highly conserved among several bacterial sugar transporters (Fig. S6). Thus, we propose that ‘YQF’ triad may be the K30CPS binding motif. Interestingly, ‘YQF’ triad also participates in potassium ion conduction into the ion-binding pocket at the extracellular side (Fig. 7). This further implicates that it may be the anchoring point for the negatively charged K30CPS onto Wzi.

A hydrophobic plug that is constituted by conserved W53, F109, W174 & W175 residues (Fig. 3) and located inside the channel acts as a physical barrier for water molecules to permeate. Consequently, transient water wires formed at multiple entry points merge at the space between the hydrophobic plug and the barrel (Fig. 3A and S4). Thus, the hydropbhobic plug acts as a junction for water molecules from multiple entries and redirects them to take a specific conduction path. Such water permeation and regulation across Wzi are also confirmed by preliminary 50 ns MD simulation carried out using CHARMM molecular modeling program18,19 (Fig. S7).

MD simulations carried out on three pentaglycine substitution mutants of helix H1 indicate that H1mut2 & H1mut3 exhibit different diffusion patterns in contrast to H1mut1 & Wzi-WT (Fig. 6, Table S1). This is due to the fact that conserved W39 and/or R43 residues that act as a blocker in Wzi-WT & H1mut1 are absent in H1mut2 (W39) & H1mut3 (W39 & R42) and lead to difference in water diffusion. While H1mut2 accommodates more water molecule at the H1-barrel interface, H1mut3 favors an additional entry point, resulting in different water diffusion pattern compared to Wzi-WT. Incidentally, H1mut2 & H1mut3 mutants are shown to be experimentally nonfunctional10 implicating that any alternation in barrel diffusion may significantly alter the function of Wzi. In fact, this offers an indirect evidence for the water conducting property of Wzi.

SBPT along with water molecules inside the crystal structure of Wzi β-barrel further supports the water transporting property of Wzi (Fig. 1) and hence, its role in osmoregulation. Thus, molecular dynamics simulation along with structure based phylogeny establishes the water transporting function of Wzi. Interestingly, among the 322 non-redundant proteins that exhibit strucutral similarity with Wzi, none are found to be lectins (majority of them are bacterial porins). This indicates that the protein might have evolved the lectin function when the bacteria established the self-defense mechanism for its survival.

Based on the bidirectional water permeation property of Wzi, we propose here a mechanism by which it may act as an osmosensor. Under hyperosmotic condition, wherein, the K30CPS that is more on the bacterial surface may exert high osmotic pressure and hence, Wzi may transports water from periplasmic to the extracellular side to avoid the rupturing of the cell. This may further aid in keeping the K30CPS in a hydrated condition as well as prevent the accumulation of nascent K30CPS onto the bacterial surface. On the other hand, under hypoosmotic condition (less concentration of K30CPS), water molecules move from extracellular to periplasmic side to maintain the osmotic pressure. Thus, water transport across Wzi depends on the concentration of K30CPS on the bacterial surface. Inferred association between additional water diffusion pattern and deleterious nature of periplasmic helix mutants H1mut2 & H1mut3 is in supportive of the role of Wzi in osmoregulation. In fact, relationship between capsular polysaccharide production and osmotic pressure is an already existing fact20,21,22. This study also proposes that ‘YQF’ triad acts as the binding site for K30CPS onto Wzi and pinpoints the importance of extracellular L5 in the anchorage of Wzi onto the outer membrane. Thus, disrupting the interaction between K30CPS & ‘YQF’ triad or altering the Wzi water diffusion or disrupting the interaction between L5 & membrane may be attractive strategies to reduce the bacterial virulence.

Besides establishing the role of Wzi as a porin, this study further establishes the importance of molecular dynamics and structure based phylogeny in identifying the unknown function of a protein. Thus, these techniques together can be used to identify the function of hypothetical proteins as well as understand their functional evolution.

Experimental procedures

Structure based alignment

As Wzi is highly divergent with respect to other family of porins (midnight zone with less than 12% of homology) at the sequence level, structure based alignment is performed to illustrate the role of Wzi as a porin. Using DALI23 structure based alignment server, 532 structures that have a Z-score greater than or equal to 2 with respect to Wzi are obtained. After removing repeated chain id’s, a net total of 328 unique pdb structures are procured. This is further reduced to 322 after removal of obsolete pdb entries. Subsequently, a diagonal matrix encompassing the RMSD based quality function that describes the Ca alignment (Q-score) is developed24 using in-house programming. Note that the RMSD used in the estimation of Q-score between the Ca atoms of any two proteins in the matrix is calculated using Pymol software (The PyMol Molecular Graphics System, Version 1.3, Schrodinger, LLC, 2010). Using the estimated Q-score, phylogeny is developed using PHYLIP25 with KITSCH algorithm. Pictorial representation of the phylogenetic tree is developed using SPLITSTREE26.

Sequence conservation analysis

PSI-BLAST27 of Wzi protein (UniProt ID: Q8GNN6) is carried out with all the parameters set to default values (Matrix: BLOSUM62, Expect threshold:10, word size:3, Gap: Existence 11 & extension 1 and PSI-BLAST threshold 0.005). Multiple sequence alignment (MSA) of five sequences are performed using COBALT28. Similarly, PSI-BLAST is also carried out using the above-mentioned parameters for bacterial vSGLT (PDB ID: 3DH4, UniProt ID: P96169) and the corresponding MSA is generated. Jalview29,30 is used to edit the generated MSAs.

System setup for MD simulations

As the 15 residues of extracellular loop 5 (L5, Fig. 2B) are missing in the crystal structure of Wzi (PDB ID: 2YNK8), these residues are modeled using ModLoop31,32 to obtain the starting model for wild-type Wzi (Wzi-WT) simulations. Three Wzi helix H1 mutants are also generated, namely, H1mut1, H1mut2 and H1mut3 (Table S1) using Wzi-WT as a template. H1mut1 has residues 32–36 of helix H1 mutated to glycine, while H1mut2 and H1mut3 have residues 35–39 and 39–43 of H1 mutated to glycine respectively.

Wzi systems for molecular dynamics simulations are generated using CHARMM-GUI18,33,34,35,36 web interface. Models are built such that the protein is embedded in the lipid bilayer using replacement method36 under heterogeneous membrane builder 36. The orientation of the protein in membrane environment is chosen based on the orientations of proteins in membranes (OPM) database37. To mimic the outer membrane of E. coli, a heterogenous lipid bilayer is used with POPG and POPE in a 1:3 ratio as discussed elsewhere38 by mentioning the number of lipid molecules using CHARMM-GUI interface. The systems are solvated in a rectangular water box using preequlibrated TIP3P water boxes39 to a thickness of 17.5 Å on top and bottom of the system, leading to approximately 14,000 water molecules. 150 mM KCl (73 K+ ions and 13 Cl) is added to the solvent using Monte-Carlo method40. Subsequently, each system is subjected to 0.5 μs simulation that also encompasses 375 ps equilibration run. MD is performed using GROMACS 4.6.4 software41 with CHARMM 3618,19 all atom force field using the following parameters.

MD simulation protocol: During the first step of the equilibration run, each system is subjected to 5000 cycles of steepest descent minimization. This is followed by 50 ps of MD simulation using NVT ensemble using leapfrog algorithm with 1 ps time interval, wherein, Berendsen thermostat42 is used to control the simulation temperature with 1 ps time coupling. Subsequently, 25 ps of MD simulation with NPT ensemble with 1 fs time interval is performed followed by 300 ps of MD simulation with 2 fs time step. Berendsen barostat42 is used to maintain the semiisotropic pressure (1 bar) with a time coupling 5 ps. Using leapfrog integrator, production run is extened up to 0.5 μs for each system along with Nose-Hoover thermostat43 (303 K) and Parrinello-Rahman barostat44,45 (1bar) with 1 ps and 5 ps coupling respectively. Pressure in the system is maintained in an semiisotropic manner in such a way that pressure in the X-Y plane of the membrane is independent of Z-direction. All the simulations are performed with particle mesh Ewald (PME) method46 which is used to treat long-range electrostatic interactions with the cut-off of 1.2 nm. A switching function with the cut-off of 1.0 nm is used to compute the Lenard-Jones potential and the distance up to 1.2 nm is used for the calculation.

50 ns simulations for all the aforementioned systems are also carried out using constant pressure and temperature (CPT dynamics) with CHARMM molecular dynamics program18,19 using CHARMM 36 all atom force field.

Analysis of the trajectories

Quantification of barrel water: To quantify the total number of barrel water molecules per ns, water molecules that fall within the minimum and maximum limits of X & Y coordinates of the entire β-barrel and between −10 Å & 10 Å from the center of the barrel along the Z-axis are summed over every ns.

Quantification of barrel permeation events and diffusion permeability: Barrel permeation is calculated at 5 separate points numbered from 1 to 5 (3 at the extracellular side and 2 at the periplasmic side) (Fig. 3A) as discussed below. When a water molecule that enters into the barrel through anyone of the 3 extracelluar diffusion points and exits the barrel through anyone of the 2 periplasmic diffusion points or vice-a-versa, then, it is counted as an diffusion entry or diffusion exit respectively. For this calculation, water molecules that are residing inside the barrel at any point of time are alone considered.

Diffusion entry calculation: As the tortuous nature of the water diffusion paths complicates diffusion calculation, a method is devised here to define a diffusion plane, through which, a water molecule must pass to be considered for diffusion. A diffusion plane at each point is defined by X, Y & Z coordinates corresponding to the atoms of three specific amino acids (Fig. S8). At first, the center of mass (Xcm, Ycm, Zcm) is calculated by considering the atoms corresponding to the X, Y & Z coordinates of three amino acids that are involved in the regulation of water diffusion. Subsequently, a local XY-plane (diffusion plane) is defined with the upper and lower bounds of (Xcm + 3.5 Å, Ycm + 3.5 Å) and (Xcm  3.5 Å, Ycm  3.5 Å) respectively. At the extracellular side, a water entry into the β-barrel (aligned along the Z-axis) is considered only when a water molecule that has Z coordinate greater than Zcm at nth ps subsequently falls within the defined XY-plane with Z-coordinates between Zcm and (Zcm  3.5 Å) (Z1) and soon after it crosses (Zcm  3.5 Å) (Fig. S8A). Subsequently, diffusion entry is counted only when a water molecule at the periplasmic side that has Z coordinate between Zcm and (Zcm + 3.5 Å) (Z2) at nth ps, falls within the defined XY-plane with Z-coordinates between Zcm and (Zcm  3.5 Å) (Z1) and soon after it crosses (Zcm  3.5 Å) (Fig. S8B).

Diffusion exit calculation: Calculation of periplasmic diffusion is swapped in such a way that a diffusion is considered when a water molecule that has Z-coordinates lesser than Zcm at nth ps, subsequently falls within the defined XY-plane with Z-coordinates between Zcm and (Zcm + 3.5 Å) (Z2) and soon after it crosses (Zcm + 3.5 Å) (Fig. S8B). Subsequently, diffusion exit is counted only when a water molecule at the extracellular side that has Z-coordinates between Zcm and (Zcm  3.5 Å) (Z1) at nth ps, falls within the defined XY-plane with Z-coordinates between Zcm and (Zcm + 3.5 Å) and soon after it crosses (Zcm + 3.5 Å) (Fig. S8A). Detailed illustration about the diffusion entry and diffusion exit calculation at each diffusion point is depicted in Fig. S9.

Calculated permeation events are used to estimate the diffusion permeability (pd) as described elsewhere14 for the last 200 ns of the simulations.

Quantification of barrel water entry and exit: Calculation of barrel water entry and exit is performed by taking into account the water molecules that fall within 5 Å range of center of mass (Xcm, Ycm, Zcm) corresponding to each entry point for every 1 ns trajectory. Subsequently, it is checked whether a specific water molecule is between Zcm and (Zcm + 5 Å) or between Zcm and (Zcm  5 Å). Water entry and exit is calculated by a protocol similar to diffusion entry/exit calculations, but, only covering ±5 Å distance in the Z-dimension. For instance, if the water molecule is between Zcm and (Zcm + 5 Å), it is counted as an extracellular entry soon after it crosses (Zcm  5 Å) and the reverse is considered for exit. Presence of the water molecule within the XY plane of the appropriate entry point (i.e Xcm ± 3.5 & Ycm ± 3.5) during the above calculation is also considered. Similarly, at the periplasmic side, water molecule moving from (Zcm  5 Å) to (Zcm + 5 Å) is counted as the entry and the reverse is taken into account for exit.

Net flux calculation:  Calculated water entry and exit events are utlized in the net flux estimation. Net flux is calculated by subtracting the total number of water molecules that exit from the barrel through all the entry/exit points from the total number of water molecules that enter inside the barrel through all the entry/exit points over the last 200 ns. It is noteworthy that net flux is calculated by simply considering water entry and exit events from all the entry/exit points, irrespective of whether a water molecule permeates across the channel or not.

Normalized frequency calculation of water entry/exit mechanisms: Following the above-described method, normalized frequency of water entry/exit mechanisms at each point is calculated by additionally imposing a hydrogen bond distance criterion (3.5 Å) between the water oxygen atoms and the side chain/main chain electronegative atoms of the amino acids.

Barrel and helix 1 (H1) interfacial water calculation: To calculate the number of water molecules at the interface of H1 and the barrel, the maximum & minimum values corresponding to X & Z coordinates are calculated by considering the appropriate H1 and barrel residues (Fig. S8C). On the other hand, Y coordinates are chosen with respect to the appropriate barrel residues so as to cover the entire helix H1. A water molecule is counted as interfacial water, only when it falls in the area ascribed by the aforementioned coordinates.

PyMol (The PyMol Molecular Graphics System, Version 1.3, Schrodinger, LLC, 2010) is used for the visualization of all the simulated trajectories and VMD47 is used for the generation of movies. All the graphs are plotted using MATLAB (MATLAB 7.11.0, The MathWorks Inc., Natick, MA, 2010).

Additional Information

How to cite this article: Sachdeva, S. et al. Key diffusion mechanisms involved in regulating bidirectional water permeation across E. coli outer membrane lectin. Sci. Rep. 6, 28157; doi: 10.1038/srep28157 (2016).

Supplementary Material

Supplementary Information:
Supplementary Movie S1:
Supplementary Movie S2:
Supplementary Movie S3:
Supplementary Movie S4:

Acknowledgments

The work was supported by Department of Biotechnology, Government of India: IYBA-2012 (D.O.No.BT/06/IYBA/2012), BIO-CaRE (SAN.No.102/IFD/SAN/1811/2013–2014), and R&D (SAN.No.102/IFD/SAN/3426/2013–2014) and Indian Institute of Technology Hyderabad (IITH). The authors thank high performance computing facility of IITH, CDAC and IUAC.

Footnotes

Author Contributions S.A.N., S.S. and N.K. carried out molecular dynamics simulations and S.S. and N.K. analyzed the data. T.R. conceived and supervised the entire project. T.R. and S.A.N. wrote the manuscript.

References

  • Whitfield C. Biosynthesis and assembly of capsular polysaccharides in Escherichia coli. Annu Rev Biochem 75, 39–68 (2006). [PubMed]
  • Campos M. A. et al. . Capsule polysaccharide mediates bacterial resistance to antimicrobial peptides. Infect Immun 72, 7107–7114 (2004). [PMC free article] [PubMed]
  • Roberts I. S. The biochemistry and genetics of capsular polysaccharide production in bacteria. Annu Rev Microbiol 50, 285–315 (1996). [PubMed]
  • Naimi I., Nazer M., Ong L. & Thong E. The Role of wza in Extracellular Capsular Polysaccharide Levels During Exposure to Sublethal Doses of Streptomycin. Journal of Experimental Microbiology and Immunology (JEMI) 13, 36–40 (2009).
  • Kunduru B. R., Nair S. A. & Rathinavelan T. EK3D: an E. coli K antigen 3-dimensional structure database. Nucleic Acids Res 44, D675–681 (2016). [PMC free article] [PubMed]
  • Whitfield C. & Paiment A. Biosynthesis and assembly of Group 1 capsular polysaccharides in Escherichia coli and related extracellular polysaccharides in other bacteria. Carbohydr Res 338, 2491–2502 (2003). [PubMed]
  • Drummelsmith J. & Whitfield C. Gene products required for surface expression of the capsular form of the group 1 K antigen in Escherichia coli (O9a:K30). Mol Microbiol 31, 1321–1332 (1999). [PubMed]
  • Bushell S. R. et al. . Wzi is an outer membrane lectin that underpins group 1 capsule assembly in Escherichia coli. Structure 21, 844–853 (2013). [PMC free article] [PubMed]
  • Whitfield C. & Roberts I. S. Structure, assembly and regulation of expression of capsules in Escherichia coli. Mol Microbiol 31, 1307–1319 (1999). [PubMed]
  • Bushell S. R. et al. . Crystallization and preliminary diffraction analysis of Wzi, a member of the capsule export and assembly pathway in Escherichia coli. Acta Crystallogr Sect F Struct Biol Cryst Commun 66, 1621–1625 (2010). [PMC free article] [PubMed]
  • Rahn A., Beis K., Naismith J. H. & Whitfield C. A novel outer membrane protein, Wzi, is involved in surface assembly of the Escherichia coli K30 group 1 capsule. J Bacteriol 185, 5882–5890 (2003). [PMC free article] [PubMed]
  • Choe S., Rosenberg J. M., Abramson J., Wright E. M. & Grabe M. Water permeation through the sodium-dependent galactose cotransporter vSGLT. Biophys J 99, L56–58 (2010). [PubMed]
  • Sasseville L. J., Cuervo J. E., Lapointe J. Y. & Noskov S. Y. The structural pathway for water permeation through sodium-glucose cotransporters. Biophys J 101, 1887–1895 (2011). [PubMed]
  • Zhu F., Tajkhorshid E. & Schulten K. Theory and simulation of water permeation in aquaporin-1. Biophys J 86, 50–57 (2004). [PubMed]
  • Yakubovich A. V., Solov’yov I. A., Solov’yov A. V. & Greiner W. Conformational changes in glycine tri- and hexapeptide. The European Physical Journal D - Atomic, Molecular, Optical and Plasma Physics 39, 23–34 (2006).
  • Smolin N., Li B., Beck D. A. & Daggett V. Side-chain dynamics are critical for water permeation through aquaporin-1. Biophys J 95, 1089–1098 (2008). [PubMed]
  • Faham S. et al. . The crystal structure of a sodium galactose transporter reveals mechanistic insights into Na+/sugar symport. Science 321, 810–814 (2008). [PMC free article] [PubMed]
  • Brooks B. R. et al. . CHARMM: the biomolecular simulation program. J Comput Chem 30, 1545–1614 (2009). [PMC free article] [PubMed]
  • Brooks B. R. et al. . CHARMM: A program for macromolecular energy minimization and dynamics calculations. J Comput Chem 4, 187–217 (1983).
  • Kuzhiyil A., Lee Y., Shim A. & Xiong A. Osmotic Stress Induces Kanamycin Resistance in Escherichia coli B23 through Increased Capsule Formation. Journal of Experimental Microbiology and Immunology (JEMI) 16, 5–10 (2012).
  • Sledjeski D. D. & Gottesman S. Osmotic shock induction of capsule synthesis in Escherichia coli K-12. J Bacteriol 178, 1204–1206 (1996). [PMC free article] [PubMed]
  • Zahrani F. A., Huang M., Lam B. & Vafaei R. Capsule Formation is Necessary for Kanamycin Tolerance in Escherichia coli K-12. Journal of Experimental Microbiology and Immunology (JEMI) 17, 24–28 (2013).
  • Holm L. & Rosenstrom P. Dali server: conservation mapping in 3D. Nucleic Acids Res 38, W545–549 (2010). [PMC free article] [PubMed]
  • Krissinel E. & Henrick K. Secondary-structure matching (SSM), a new tool for fast protein structure alignment in three dimensions. Acta Crystallogr D Biol Crystallogr 60, 2256–2268 (2004). [PubMed]
  • Retief J. D. Phylogenetic analysis using PHYLIP. Methods Mol Biol 132, 243–258 (2000). [PubMed]
  • Huson D. H. SplitsTree: analyzing and visualizing evolutionary data. Bioinformatics 14, 68–73 (1998). [PubMed]
  • Altschul S. F. et al. . Gapped BLAST and PSI-BLAST: a new generation of protein database search programs. Nucleic Acids Res 25, 3389–3402 (1997). [PMC free article] [PubMed]
  • Papadopoulos J. S. & Agarwala R. COBALT: constraint-based alignment tool for multiple protein sequences. Bioinformatics 23, 1073–1079 (2007). [PubMed]
  • Waterhouse A. M., Procter J. B., Martin D. M., Clamp M. & Barton G. J. Jalview Version 2--a multiple sequence alignment editor and analysis workbench. Bioinformatics 25, 1189–1191 (2009). [PMC free article] [PubMed]
  • Clamp M., Cuff J., Searle S. M. & Barton G. J. The Jalview Java alignment editor. Bioinformatics 20, 426–427 (2004). [PubMed]
  • Fiser A., Do R. K. & Sali A. Modeling of loops in protein structures. Protein Sci 9, 1753–1773 (2000). [PubMed]
  • Fiser A. & Sali A. ModLoop: automated modeling of loops in protein structures. Bioinformatics 19, 2500–2501 (2003). [PubMed]
  • Jo S., Kim T., Iyer V. G. & Im W. CHARMM-GUI: a web-based graphical user interface for CHARMM. J Comput Chem 29, 1859–1865 (2008). [PubMed]
  • Jo S., Lim J. B., Klauda J. B. & Im W. CHARMM-GUI Membrane Builder for mixed bilayers and its application to yeast membranes. Biophys J 97, 50–58 (2009). [PubMed]
  • Wu E. L. et al. . CHARMM-GUI Membrane Builder toward realistic biological membrane simulations. J Comput Chem 35, 1997–2004 (2014). [PMC free article] [PubMed]
  • Jo S., Kim T. & Im W. Automated builder and database of protein/membrane complexes for molecular dynamics simulations. PLoS One 2, e880 (2007). [PMC free article] [PubMed]
  • Lomize M. A., Pogozheva I. D., Joo H., Mosberg H. I. & Lomize A. L. OPM database and PPM web server: resources for positioning of proteins in membranes. Nucleic Acids Res 40, D370–376 (2012). [PMC free article] [PubMed]
  • Chugunov A. et al. . Lipid-II forms potential “landing terrain” for lantibiotics in simulated bacterial membrane. Sci Rep 3, 1678 (2013). [PMC free article] [PubMed]
  • Jorgensen W. L., Chandrasekhar J., Madura J. D., Impey R. W. & Klein M. L. Comparison of simple potential functions for simulating liquid water. J. Chem. Phys. 79, 926–935 (1983).
  • Im W., Seefeld S. & Roux B. A Grand Canonical Monte Carlo-Brownian dynamics algorithm for simulating ion channels. Biophys J 79, 788–801 (2000). [PubMed]
  • Van Der Spoel D. et al. . GROMACS: fast, flexible, and free. J Comput Chem 26, 1701–1718 (2005). [PubMed]
  • Berendsen H. J. C., Postma J. P. M., van Gunsteren W. F., DiNola A. & Haak J. R. Molecular dynamics with coupling to an external bath. The Journal of Chemical Physics 81, 3684–3690 (1984).
  • Evans D. J. & Holian B. L. The Nose–Hoover thermostat. The Journal of Chemical Physics 83, 4069–4074 (1985).
  • Parrinello M. & Rahman A. Polymorphic transitions in single crystals: A new molecular dynamics method. Journal of Applied Physics 52, 7182–7190 (1981).
  • Kalli A. C., Campbell I. D. & Sansom M. S. Multiscale simulations suggest a mechanism for integrin inside-out activation. Proc Natl Acad Sci USA 108, 11890–11895 (2011). [PubMed]
  • Darden T., York D. & Pedersen L. Particle mesh Ewald: An N·log(N) method for Ewald sums in large systems. The Journal of Chemical Physics 98, 10089–10092 (1993).
  • Humphrey W., Dalke A. & Schulten K. VMD: visual molecular dynamics. J Mol Graph 14, 33–38, 27–38 (1996). [PubMed]
  • Thomas M., Jayatilaka D. & Corry B. The predominant role of coordination number in potassium channel selectivity. Biophys J 93, 2635–2643 (2007). [PubMed]

Articles from Scientific Reports are provided here courtesy of Nature Publishing Group