|Home | About | Journals | Submit | Contact Us | Français|
Metformin, a widely implemented anti-diabetic drug, exhibits potent anticancer efficacies. Herein a polymeric construction of Metformin, PolyMetformin (PolyMet) is successfully synthesized through conjugation of linear polyethylenimine (PEI) with dicyandiamide. The delocalization of cationic charges in the biguanide groups of PolyMet reduces the toxicity of PEI both in vitro and in vivo. Furthermore, the polycationic properties of PolyMet permits capture of siRNA into a core-membrane structured lipid-polycation-hyaluronic acid (LPH) nanoparticle for systemic gene delivery. Advances herein permit LPH-PolyMet nanoparticles to facilitate VEGF siRNA delivery for VEGF knockdown in a human lung cancer xenograft, leading to enhanced tumour suppressive efficacy. Even in the absence of RNAi, LPH-PolyMet nanoparticles act similarly to Metformin and induce antitumour efficacy through activation of the AMPK and inhibition of the mTOR. In essence, PolyMet successfully combines the intrinsic anticancer efficacy of Metformin with the capacity to carry siRNA to enhance the therapeutic activity of an anticancer gene therapy.
The discovery of RNA interference (RNAi) has since provided a conserved cellular pathway to modulate or inhibit endogenous gene expression through short interfering RNA (siRNA) therapeutics1,2. However, naked siRNA is susceptible to degradation by nucleases in blood serum and unable to cross the cell membrane due to its anionic charge3,4. Thus, systemic delivery of RNAi therapeutics to cancerous tissues remains a major challenge. To date, in vivo siRNA delivery has been achieved by vector-based delivery systems with cationic or ionizable characteristics, including polycation5,6, lipid7,8,9 and inorganic nanoparticles10,11, and RNA modifications/conjugations12,13. Among them, delivery using cationic polymers composed of different cationic compositions has become one of the most widely accepted strategies for delivery of siRNA14,15. Yet, the functional mechanisms of a polycation's molecular composition on siRNA delivery remain unclear16. Recently, materials have been developed incorporating guanidine groups to increase cellular uptake and transfection17,18. Herein a polycationic bi-guanidine composed of the anticancer therapeutic, Metformin (dimethyl-bi-guanide), has been developed for in vivo siRNA delivery. Metformin, one of the most effective drugs against diabetes19, is also known as a therapeutic agent against cancers including lung cancer20,21, pancreatic cancer22, breast cancer23, gastric cancer24,25 and so on. The anticancer efficacy of Metformin can be primarily attributed to the activation of AMP-activated protein kinase (AMPK)26,27 and inhibition of the mammalian target of rapamycin (mTOR)28,29. This cationic small molecular drug shows excellent tolerability and can be dosed at up to 2g per day due to low toxicity. Moreover, the cationic biguanide composition of Metformin makes its polymeric form a desirable carrier for siRNA delivery. Therefore, it is expected that polymeric Metformin (PolyMet) would serves dual purposes as both a gene carrier and an antitumour therapeutic to achieve combinational therapeutic efficacies against cancer. Human non-small-cell lung cancer (NSCLC) is a well-known, aggressive and metastatic refractory tumour that responds to treatment by Metformin30,31. Thus, a NSCLC tumour cell H460 was used to evaluate the efficacy of siRNA delivery and antitumour abilities of PolyMet in this study.
Our data show a possibility to facilitate vascular endothelial growth factor (VEGF) siRNA in vivo delivery by PolyMet nanoparticles and enhanced tumour growth. In the absence of RNAi, LPH-PolyMet nanoparticles, like metformin, activated the AMPK, inhibited the mTOR pathway and induced tumour autophagy and apoptosis. Thus, PolyMet successfully combines the intrinsic anticancer efficacy of Metformin with the capacity to carry siRNA to enhance the therapeutic activity of an anticancer gene therapy.
Inspired by the fact that Metformin can be synthesized through a one-step reaction of dimethylamine hydrochloride and 2-cyanoguanidine (dicyandiamide), with heating (Supplementary Fig. 1), the Metformin polymer was designed using a similar method. To yield PolyMet, linear polyethylenimine (PEI) and dicyandiamide were reacted under heat in acidic conditions (Fig. 1a). Linear PEI hydrochloride (0.2g) and dicyandiamide (2g) were mixed in 10ml 2M HCl solution. The reaction mixture was reacted at 100°C for 24h, purified through an ultrafiltration tube to remove excess dicyandiamide, washed with deionized water for two times and lyophilized. The formation of PolyMet was verified by using proton nuclear magnetic resonance (1H-NMR) (Supplementary Fig. 2A) and matrix assisted laser desorption/ionization time-of-flight (MALDI-TOF) (Supplementary Fig. 2B,C) analyses. 1H-NMR (400MHz, d6-dimethylsulfoxide) spectrum exhibits all characteristic proton resonance peaks corresponding to the present PolyMet molecules. The appearance of the proton resonance at δ 2.86–3.75p.p.m. in the product along with the characteristic guanidium proton at δ 5.80–6.40p.p.m. confirmed the formation of biguanide polymer. The spectrum also indicated near 95% substitution ratio of PolyMet by comparing the area ratios of PEI (2.53–2.70p.p.m.) and PolyMet (2.86–3.75p.p.m.). MALDI-TOF of the PolyMet and free PEI was performed to determine the synthesis of PolyMet (Supplementary Fig. 2B,C). The distribution centre for PEI (ca. 570Da) was completely red-shifted compared with PolyMet (ca. 1600Da), which is consistent with the 1H-NMR result, indicating successful conjugation of PEI with 2-cyanoguanidine (Supplementary Fig. 2B). The average molecular weight of PEI shown by MALDI-TOF analysis is smaller than the molecular weight we used for synthesis (ca. molecular weight is 4,300Da), which might be due to the existence of numerous differently charged species of PEI, since MALDI-TOF only detects singly charged species32. Moreover, the extended MALDI-TOF mass spectra (Supplementary Fig. 2C) show several series of oligomer ions 43 and 129m/z apart from each other, in agreement with the PEI (43m/z for C2H5N unimer) and PolyMet (129m/z for C4H11N5 unimer) repeat units, respectively. As described in authoritative literatures33,34, Metformin can be characterized by (1) using ultraviolet absorption at the wavelength of maximum absorbance at about 233nm or (2) exhibiting a red colour in the solution of nitroprusside/potassium hexacyanoferrate(III)/sodium hydroxide. Both PolyMet and Metformin exhibited a maximum absorbance around 233nm (Fig. 1b) and showed red colour in the colour test in a dose-dependent manner (Fig. 1c). These results suggest that after the reaction with dicyandiamide, the secondary amines in PEI had been completely replaced with biguanides.
Notably, PolyMet showed a significantly lower cytotoxicity (Fig. 1d) and threefold higher maximum tolerable dose compared with PEI (Supplementary Table 1), indicating PolyMet containing guanidine is more tolerable than its secondary amine-containing counterpart. But the lower maximum tolerable dose of PolyMet than Metformin (Supplementary Table 1) is perhaps attributed to the interaction of the cationic polymer with the serum proteins in the blood. In summary, PolyMet as a cationic polymer may be used to condense and deliver negatively charged siRNA with similar pharmacological properties and activity to Metformin due to the biguanide structure.
It is well documented that siRNA forms a loose and unstable complex when mixed with only polycationic polymers due to its low molecular weight and low charge density35,36. Therefore, liposomes were used to coat complexes to protect siRNA from dissociation or clearance before it reaches the tumour in our study. First of all, hyaluronic acid (HA), a polyanionic and multivalently charged polysaccharide, was used to facilitate siRNA delivery and enhance the particle condensation. Then cationic 1,2-dioleoyl-3-trimethylammonium-propane chloride salt (DOTAP) liposome was applied to coat complex to prove the stability of complex. These core/shell-type nanoparticles, referred to the lipid-polycation-hyaluronic acid (LPH) nanoparticle were established for systemic delivery of siRNAs to the tumour site37,38. Specifically, HA was mixed with siRNA at 1:1 mole ratio, and modulated the N/P ratios of PolyMet/(HA+siRNA) complex. Aggregates were observed at an N/P ratio around 0.9, where a neutral complex was formed. In this case, 0.6 was chosen as the optimal ratio, as the complex remained negatively charged (~ −20mV) with a relatively small size (~100nm). At this ratio the PEI/(HA+siRNA) complex had a similar charge and size with PolyMet/(HA+siRNA) complex (Supplementary Fig. 3). Next, DOTAP/cholesterol (1:1mol/mol) cationic liposomes were added to the complex to form the lipid coating through charge–charge interactions. Studies have shown that the NSCLC cell H460 overexpresses sigma receptors17,39,40, thus a targeting ligand for the sigma receptors, DSPE-PEG-anisamide, was used to deliver nanoparticles to the tumour by the post-insertion method to form the outer leaflet of the liposome membrane. The size, distribution, morphology and the characteristics of the nanoparticles are summarized in Fig. 2 and Supplementary Table 2. The lipid coating reduced the complex's size due to electrostatic interactions. The final nanoparticles were 70–80nm with a positive charge of about 20mV and 4.38% loading efficiency (Supplementary Table 2).
Previous studies have shown that VEGF siRNA suppresses angiogenesis and may be a potential therapeutic agent for NSCLC41. Human NSCLC H460 tumour-bearing mice received intravenous (i.v.) injections of different formulations with VEGF siRNA or control siRNA every other day. On successive i.v. injections into tumour-bearing mice, the greatest enhancement of antitumour efficacy was observed when LPH-PolyMet-siVEGF was administered (Fig. 3a).
Notably, the LPH-PolyMet-siCtrl group that contained control siRNA also showed a partial tumour suppression activity, indicating that poly-biguanide structure of PolyMet has the antitumour activity. Meanwhile, minimal suppression of tumour growth was found in the LPH-PEI-siCtrl group. One day after the second injection, mice were killed and tumour lysates were prepared for western blot. As shown in Fig. 3b, LPH-PolyMet-siVEGF group showed robust knockdown of VEGF with about 95% of silencing compared with the phosphate-buffered saline (PBS) group. LPH-PEI-siVEGF had only a partial effect on the VEGF expression level with about 70% of knockdown in comparison with control group. LPH-PolyMet-siCtrl showed a slight knockdown effect. LPH-PEI-siCtrl had no measurable effect on the protein expression level of VEGF.
Terminal deoxynucleotidyl transferase dUTP nick end labelling (TUNEL) assay further confirmed the induction of apoptotic cells in tumours (Fig. 3c). The number of TUNEL-positive apoptotic cells after LPH-PolyMet-siVEGF treatment was about 40%, which was the highest among all groups. This indicates that elevated apoptosis occurred after downregulation of VEGF expression, which is consistent with studies reported elsewhere42. Treatment with LPH-PEI-siVEGF could only induced apoptosis in about 20% of cells. Importantly, we also observed that LPH-PolyMet-siCtrl exhibited significant higher TUNEL-positive population compared with PBS or LPH-PEI-siCtrl, indicating the apoptotic capability of PolyMet gene carrier itself.
PolyMet LPH was then investigated to determine its ability to carry other therapeutic siRNA. As an anti-apoptotic protein BCL-2 promotes cell survival, and inhibition of BCL-2 can suppress tumour growth43,44. Herein siRNA used against BCL2 inhibited tumour growth, especially in the LPH-PolyMet-siBCL2 treatment group, which provided persistent suppression of tumour growth (Supplementary Fig. 4A). The level of BCL-2 after treatment was detected by western blot analysis, LPH-PolyMet-siBCL2 induced a significant downregulation of BCL-2 level in comparison with all other groups (Supplementary Fig. 4B) and the TUNEL assay further confirmed the induction of apoptotic cells in tumours. The number of TUNEL-positive apoptotic cells after LPH-PolyMet-siBCL2 treatment was about 70%, which was significantly higher than all other groups (Supplementary Fig. 4C). This indicates that elevated apoptosis occurred after downregulation of BCL2 anti-apoptotic protein expression in the LPH-PolyMet-siBCL2 group.
PolyMet was then tested for gene delivery and tumour inhibition in a melanoma model. As shown in Supplementary Fig. 5, the most effective treatment, LPH-PolyMet-siVEGF resulted in a knockdown of VEGF level by ~70% and a suppression of tumour growth by about 80% in comparison with the PBS group in a 1205Lu melanoma model. Meanwhile, LPH-PEI-siVEGF also suppressed tumour growth effectively, but not as persistently as LPH-PolyMet-siVEGF.
Moreover, the antitumour activity of PolyMet was compared with other two commonly used polycations, poly-L-lysine (PLL) and protamine. PLL and Protamine were formulated in the LPH systems containing the same amount of VEGF siRNA as PolyMet. The antitumour efficacy and VEGF knockdown were presented in Supplementary Fig. 6. All LPH formulations had significantly suppressed tumour growth in comparison with PBS. However, there was no significant difference among PEI, PLL and protamine. The greatest enhancement of antitumour effect was observed with PolyMet. The expression of VEGF was also evaluated after day 16, as shown in Supplementary Fig. 6B. The VEGF level in the tumour was significantly lower than other groups, as well as the PBS control. Thus, PolyMet showed the greatest antitumour activity among all four polycations tested.
Both clinical and preclinical studies have shown that Metformin improved survival and/or antitumour efficacy25,45. Results shown in Fig. 3 and Supplementary Figs 4, 5 and 6B indicate the tumour growth inhibition of LPH-PolyMet-siCtrl. It was thus hypothesized that in the absence of RNAi, PolyMet, like its unimer Metformin, may be responsible for some part of anticancer activity. The effect of LPH-PolyMet and different nanoparticles on an H460 xenograft was studied. As shown in Fig. 4, treatment with LPH-PolyMet led to significant inhibition of cancer growth in comparison with PBS. A noticeable difference in tumour growth inhibition was observed between LPH-PEI and LPH-PolyMet (Fig. 4a), suggesting that PolyMet played an important role in enhancing antitumour activity. At the end of the experiment, the tumours of the animals treated with LPH-PolyMet were <1% of the total body weight, which was significantly smaller than the LPH-PEI (4%) and PBS (6%) groups (Fig. 4b). Moreover, no toxicity was detected in blood haematology serum chemistry or the histology of the major tissues (Supplementary Fig. 7 and Supplementary Table 3).
Furthermore, we compared the effect of LPH-PolyMet siRNA nanoparticles with Metformin in an H460 xenograft (Supplementary Fig. 8). Free Metformin (1.25mgkg−1) equivalent to the unimer dose of PolyMet (1.25mgkg−1) that was required to deliver 0.625mgkg−1 of VEGF siRNA was used in the study. It was confirmed that there is no significant difference between the PolyMet carrier (LPH-PolyMet-siCtrl) and Metformin, indicating that biguanide in the PolyMet copolymers are associated with the anticancer activities of Metformin. Both of the groups exhibit significantly higher antitumour growth activity compared with LPH-PEI-siCtrl or PBS while LPH-PolyMet-siVEGF has the best antitumour efficacy. In this case tumour growth was suppressed seven- to eightfold compared with the PBS group, and about twofold compared with the PolyMet carrier or the Metformin group, which suggests again that PolyMet successfully combine the intrinsic anticancer efficacy of Metformin with the tumour suppressive effects of VEGF siRNA to enhance the therapeutic activity of an anticancer gene therapy.
It has been reported that Metformin inhibits cancer cells by activating the AMPK and inhibiting the mTOR pathways28,46. We checked the activity of PolyMet in these pathways and compared it with that of Metformin. AMPK acts as a metabolic tumour suppressor that governs glucose and lipid metabolism47. In many cases, a low level of phosphorylation of AMPK is correlated with poor prognosis after cancer treatment48. We observed that following treatment with Metformin or LPH-PolyMet, phosphorylation levels of AMPKα in the H460 tumour were significantly enhanced compared with the PBS group (Fig. 5a). The activation of AMPKα did not occur in the LPH-PEI group, suggesting PolyMet is the key factor in the nanoparticle that can activate AMPKα pathway. mTOR is a downstream effector of AMPK49. AMPK activation inhibits mTOR and its downstream effector kinases50. Phosphorylation of mTOR plays a pivotal role in the proliferation and survival of cancer cells51. Therefore, we then evaluated the effects of treatments on the activity of mTOR (Fig. 5a). Metformin and LPH-PolyMet treatments led to a significant inhibition of mTOR activity indicated by stronger reduction in p-mTOR/mTOR levels compared with the PBS group. The activity was not shared by LPH-PEI.
Autophagy is recognized as a potentially toxic mechanism for Metformin that results in the inhibition of cancer growth52,53. We evaluated whether autophagy can also be observed after treatment of LPH-PolyMet. Microtubule-associated protein light chain 3 b (LC3b) is a specific marker for autophagy initiation54. As shown in Fig. 5b, Metformin- and LPH-PolyMet-treated tumours showed a higher LC3b-associated red fluorescence than other groups, indicating that both Metformin and LPH-PolyMet could induce autophagy in the H460 lung cancer xenograft model.
Finally, the mechanism of the antitumour efficacy after treatment was determined by the TUNEL assay, a common method to test for apoptosis (Fig. 5b). The per cent of apoptotic cells after Metformin or LPH-PolyMet treatments was 12.4% and 15%, respectively, while no significant apoptosis induction was observed in other groups. This suggests that Metformin or polymer form can induce cell apoptosis and play a critical role in regulating the cancer cell survival.
Nanotechnology has been extensively exploited to prolong the circulation time and to enhance the therapeutic activity for a variety of drugs. After systemic injection the nanoparticles drain through the leaky tumour blood vessels and are retained at the tumour site, resulting in increased tumour accumulation of the nanoparticle-formulated drug compared with the free drug. This well-documented phenomenon is referred to as the enhanced permeability and retention effect55. Thus, nanoparticles offer a number of advantages over free drugs, which make them an ideal delivery vehicle for Metformin. However, due to its high hydrophilicity, Metformin cannot be effectively loaded into established nanocarriers, which explains why only few Metformin nanoparticles have been reported56,57,58. Recently, Yang et al.56 reported the co-encapsulation of epirubicin and Metformin into liposomes through remote loading. This nanoparticle successfully inhibited the growth of CD133+ cancer stem-like cells. Jose et al.57 developed Metformin-loaded bovine serum albumin nanoparticles (MET-BSA) by the coacervation method and observed that MET-BSA nanoparticle showed higher efficacy than Metformin alone or the BSA carrier itself. However, PolyMet, which combines both gene delivery and anticancer capabilities, represents a novel approach.
Guanidination of a polymer enhances the activity for gene delivery and has considerably less toxicity compared with primary amines of the polymer59,60. The guanidine has been found to readily pass through the non-polar membrane of a cell and even across tissue barriers by possibly forming a bidentate hydrogen bond with anionic cell surface phosphate, carboxylates and/or sulfates on the cell surface61,62. Materials have been previously developed incorporating guanidine groups to increase cellular uptake and transfection60,63,64,65. For example, Lee et al.60 used pyrazole-1-carboxamidine to react with branched PEI, and observed enhancement of transfection efficiency and decreased cytotoxicity of PEI by guanidylation. Wender et al. developed non-natural guanidinium-rich molecular transporters to enhance cellular uptake61,66, through tunable polyguanidino dendrimers, and observed higher cellular uptake65. Guanidinium-rich molecular transporters can penetrate cells and overcome efflux-mediated multidrug resistance67. Although these previously reported polyguanidines are established gene carriers, the carriers themselves fail to exhibit anticancer activity without their therapeutic agent. Thus, PolyMet serves as both a gene carrier and anticancer therapeutic. However, findings presented herein have not been investigated with PolyMet against a p53-deficient tumour, which remains to be further explored. The focus of this study is to show the carrier and anticancer activities of PolyMet. The dose of PolyMet used in the study was dictated by the dose of siRNA and was only a fraction of the effective dose of metformin. Further study with increased PolyMet dose will bring the new polymer a step closer to the clinical translation.
DOTAP and 1,2-distearoryl-sn-glycero-3-phosphoethanolamine-N-[methoxy(polyethyleneglycol-2000) ammonium salt (DSPE-PEG2000) were purchased from Avanti Polar Lipids, Inc. (Alabaster, AL). DSPE-PEG-anisamide was synthesized in our lab as described previously68. DeadEnd Fluorometric TUNEL assay kits and Luciferase Assay System assay substrates were obtained from Promega (Madison, WI). Linear PEI hydrochloride with average molecular weight 8,000, dicyandiamide, HA and other chemicals were obtained from Sigma-Aldrich (St. Louis, MO). Rabbit monoclonal antibodies Phospho-AMPKα(Thr172) (40H9) (catalogue # 2535), AMPKα (D5A2) (catalogue # 5831), Phospho-mTOR (Ser2448) (D9C2) XP (catalogue # 5536), mTOR (7C10) (catalogue # 2983), LC3b (D11) XP (catalogue # 3868), GAPDH (14C10) (catalogue # 2118) and Anti-rabbit IgG, horseradish peroxidase-linked Antibody (catalogue # 7074) were purchased from Cell Signaling Technology (Beverly, MA). BCL2 siRNA (target sequence: 5′-AACAUCGCCCUGUGGAUGACU-3′), VEGF siRNA (target sequence: 5′-ACCUCACCAAGGCCAGCAC-3′) and control siRNA (target sequence: 5′-AAUUCUCCGAACGUGUCACGU-3′) were synthesized by Sigma-Aldrich.
H460 human NSCLC cells and 1205Lu melanoma cancer cells were originally obtained from American Type Culture Collection and were cultured in DMEM medium (Invitrogen, Carlsbad, CA) supplemented with 10% fetal bovine serum (Life Technologies, Carlsbad, CA), 100Uml−1 penicillin and 100μgml−1 streptomycin (Invitrogen). Cells were cultured in a humidified incubator at 37°C and 5% CO2.
Female nude female mice and female CD1 mice that were 6–8 weeks old were used in the studies. Female nude mice were purchased from National Cancer Institute (Bethesda, MD) and bred by the Division of Laboratory Animal Medicine at University of North Carolina at Chapel Hill. CD1 mice were purchased from Charles River Laboratories (Morrisville, NC). To establish the xenograft models, 5 × 106 cells in 100μl of PBS were injected subcutaneously into the right flank of the mice. All work performed on animals was approved by the Institutional Animal Care and Use Committee at the University of North Carolina at Chapel Hill.
To prepare PolyMet, 0.2g of linear PEI and 2g of dicyandiamide were mixed in 10ml 2M HCl solution. The compounds reacted at 100°C in the oil bath for 24h. PolyMet was then purified through an ultrafiltration tube, washed with deionized (DI) water for two times and lyophilized. The working solution of PolyMet was diluted in DI water and kept as 1mgml−1, 1ml aliquots for experiment. To verify the formation of PolyMet, NMR and MALDI-TOF analyses were performed (Supplementary Methods).
A volume of 200μl of PEI solution (containing 5, 10, 15 or 20μg PEI in DI water) or 200μl of PolyMet solution (containing 50, 60, 70 or 80μg PolyMet in DI water) was mixed with 200μl of HA (containing 50μg HA, in DI water) in a 1.5-ml tube. The complexes were mixed by pipetting up and down for 10 times and allowed to stand at room temperature for 10min. The optimal ratio of the complex was determined by the results from particle size and zeta potential determined by dynamic light scattering using a Malvern ZetaSizer Nano series (Westborough, MA).
DOTAP/cholesterol liposomes were prepared as follows: DOTAP (20mM, 1ml) and cholesterol (20mM, 1ml) were dissolved (1:1mol/mol) in chloroform and the solvent was removed under reduced pressure. The lipid film was then hydrated overnight with 2ml distilled water to form cationic liposomes (10mM), which were sequentially extruded through polycarbonate membranes (200nm × 20 times, 100nm × 20 times and 50nm × 20 times) (Millipore, Billerica, MA). LPH cores were prepared by mixing 100μl of 5% glucose solution A (containing the 12.5μg of siRNA and 12.5μg of HA) with 100μl of 5% glucose solution B (containing 5μg of PEI, or 25μg of PolyMet, or 6μg of PLL, or 13μg of Protamine) and incubated at room temperature for 10min. The LPH cores were then mixed with 30μl of cationic DOTAP/cholesterol liposomes and incubated at room temperature for 10min to ensure proper lipid coating. The lipid-coated nanoparticles were PEGylated using a post-insertional approach by adding 10μl DSPE-PEG (10mgml−1) and 10μl DSPE-PEG-anisamide (10mgml−1) and incubating the nanoparticles at 50°C for 15min.
The size and surface charge of LPH cores and final particles were determined by using a Malvern ZS90 Zetasizer (Worcestershire, UK). Transmission electron microscope images of LPH were acquired through the use of JEOL 100CX II transmission electron microscope (Tokyo, Japan). Briefly, freshly prepared LPH nanoparticles (5μl) were carefully dropped onto a 300-mesh carbon-coated copper grid (Ted Pella, Inc., Redding, CA) and allowed to stand at room temperature for 5min. Grids were then stained with 1% uranyl acetate (5μl) and allowed to incubate briefly (10s) and quickly dry. All images were acquired at an accelerating voltage of 100kV.
After final LPH-PolyMet-siRNA formulation, the free siRNA were separated by centrifugation for 20min at 18,000g and 4°C. The siRNA concentration in the supernatant was measured by the Quant-iT RiboGreen RNA reagent according to the manufacturer's instructions, using a fluorescence spectrometer (Perkin-Elmer, Waltham, MA) at 485/520nm excitation/emission. Each sample was assayed in triplicate.
H460 human lung cancer cells (5.0 × 106) were subcutaneously injected into the right flanks of female athymic nu/nu mice. Drugs were administrated i.v. into mice when the tumours reached about 50–80mm3 in size (5–7 days after transplantation). LPH equivalent to 0.625mgkg−1 of VEGF siRNA or control siRNA, prepared as described above, were i.v. injected every other day. Free Metformin (1.25mgkg−1) equivalent to the unimer dose of PolyMet (1.25mgkg−1) that was required to deliver 0.625mgkg−1 of siRNA was used in the study. Animal weight and tumour volumes were measured every other day. The tumour length (L) and width (W) were used to calculate volume (V) by the following equation: V=1/2 × L × W2. Serum biochemical value analysis and haematology assay were provided in Supplementary Methods.
Western blotting was used to evaluate the protein expression of tumour cells after systemic administration. Tumour-bearing mice were injected i.v. every other day and were killed 24h after the second injection. A unit of 50mg of tumour was collected randomly via biopsy and homogenized with a Tissue Master-125 homogenizer (OMNI International) in 500μl cold radioimmunoprecipitation assay buffer (Sigma-Aldrich) supplemented with 1% protease inhibitor cocktail (Sigma-Aldrich) for 30min. Total homogenate was then spun down at 13,000g with a tabletop centrifuge for 10min at 4°C. Supernatant was collected and protein sample was quantified using a bicinchoninic acid assay kit in accordance with the manufacturer's instruction (Pierce Biotech). Samples were diluted in 4 × sample buffer and 10 × sample-reducing reagent (Thermo Fisher). A unit of 40mg protein from each group was separated by 4–12% SDS–PAGE electrophoresis (Invitrogen) and transferred to a polyvinylidene difluoride membrane (Bio-Rad). Membranes were blocked with 5% non-fat dry milk (Bio-Rad) for 1h at room temperature and then incubated with primary antibodies (1:1,000 dilution; Cell Signal) overnight at 4°C. The membranes were washed three times with PBS-Tween, followed by incubation with horseradish peroxidase-conjugated secondary antibody (1:4,000 dilution; Cell Signal) for 1h at room temperature. Finally, the membranes were washed three times with PBS-Tween and developed using Pierce ECL Western Blotting substrate (Thermo Scientific). The expression level of targeted protein was quantified by ImageJ software (NIH). GAPDH was detected as loading control. Images have been cropped for presentation but are otherwise unmodified. Full-size images are presented in Supplementary Figs 9 and 10.
The TUNEL assay was used to detect apoptotic tumour cells after systemic administration. Briefly, tumours were collected and fixed in freshly prepared 4% paraformaldehyde or 10% formalin for 1 day. Tumour samples were paraffin-embedded and sectioned by the UNC Animal Histopathology Core. The slides were then deparaffinized in xylene and rehydrated through a gradient alcohol series. The TUNEL staining was performed in accordance with the manufacturer's protocol (Promega). Nuclei of tumour cells were stained with DAPI (Vector Laboratories). Images of were taken using a fluorescence microscope (Nikon). The percentage of apoptotic cells was calculated by dividing the number of apoptotic cells from the total number of cells in each microscopic field. Representative microscopic fields (n=5) were randomly selected in each treatment group for this analysis.
All statistical analyses were carried out using GraphPad Prism Software (Version 5.0, GrapPad Software, San Diego, CA).
How to cite this article: Zhao, Y. et al. PolyMetformin combines carrier and anticancer activities for in vivo siRNA delivery. Nat. Commun. 7:11822 doi: 10.1038/ncomms11822 (2016).
Supplementary Figures 1-10, Supplementary Tables 1-3 and Supplementary Methods
This work was supported by NIH grants 1U54CA198999-01, CA151652, CA149363 and DK100664. We thank Dr. Jinyao Liu and Dr. Karl M Koshlap for the H-NMR analysis, Ms Nely Dicheva for the MALDI-TOF analysis, Mr Michael Lin and Mr Andrew Satterlee for their assistance in manuscript preparation, and Ms Qi Liu for her assistance in cover art preparation.
L.H., Y.Z. and S.G. are authors on a patent application entitled ‘Polymeric metformin and its use as a therapeutic agent and as a delivery vehicle' (International Patent Application PCT/US2016/020921). The remaining authors declare no competing financial interests.
Author contributions Y.Z. and L.H. designed the project and wrote the paper; Y.Z. and S.G. synthesized materials; Y.Z., S.G., W.W., Y.W., L.M. and Y.X. performed the experiments and analysed the data. All authors discussed the results and commented on the manuscript.