|Home | About | Journals | Submit | Contact Us | Français|
Current Genome-Wide Association Studies (GWAS) are performed in a single trait framework without considering genetic correlations between important disease traits. Hence, the GWAS have limitations in discovering genetic risk factors affecting pleiotropic effects.
This work reports a novel data mining approach to discover patterns of multiple phenotypic associations over 52 anthropometric and biochemical traits in KARE and a new analytical scheme for GWAS of multivariate phenotypes defined by the discovered patterns. This methodology applied to the GWAS for multivariate phenotype highLDLhighTG derived from the predicted patterns of the phenotypic associations. The patterns of the phenotypic associations were informative to draw relations between plasma lipid levels with bone mineral density and a cluster of common traits (Obesity, hypertension, insulin resistance) related to Metabolic Syndrome (MS). A total of 15 SNPs in six genes (PAK7, C20orf103, NRIP1, BCL2, TRPM3, and NAV1) were identified for significant associations with highLDLhighTG. Noteworthy findings were that the significant associations included a mis-sense mutation (PAK7:R335P), a frame shift mutation (C20orf103) and SNPs in splicing sites (TRPM3).
The six genes corresponded to rat and mouse quantitative trait loci (QTLs) that had shown associations with the common traits such as the well characterized MS and even tumor susceptibility. Our findings suggest that the six genes may play important roles in the pleiotropic effects on lipid metabolism and the MS, which increase the risk of Type 2 Diabetes and cardiovascular disease. The use of the multivariate phenotypes can be advantageous in identifying genetic risk factors, accounting for the pleiotropic effects when the multivariate phenotypes have a common etiological pathway.
Genome-wide association studies (GWAS) have broadened our knowledge on architectures of disease susceptible loci for many common disease of public health importance. A general approach for GWAS follows a strategy to investigate the correlations between single genetic variants and single traits within a univariate framework. The GWAS have not considered complicated genetic nature such as pleiotropy that occurs due to potential genetic correlation between different traits [1,2]. Thus, it tends to be restricted to identify pleiotropic genes that situated at common etiologic pathways of correlated human diseases.
Patterns of pleiotropic effects have been observed more with an increasing number of variants identified through GWAS . For instances, Winkler and colleagues identified a variant of TCF2 (Transcription Factor 2) associated with T2D , while a different variant in the same gene was associated with an increased risk of prostate cancer . These two studies indicate that the risk allele for prostate cancer protects from T2D with an odds ratio of 0.91. In addition, two studies  showed that the same variant in GDF5 associated with greater height also was associated with reduced risk of osteoarthritis [6,7].
As we have mentioned the examples above, previous work has shown that ignoring pleiotropic effects may cause imprecise phenotype definition of heterogeneous samples or even spurious associations. A bias in sampling cases and controls characterizing single traits might be propagated since the sampling errors tend to be correlated if the single traits were correlated. This may confound the interpretation of results. Although any loss of power occurred by selection of samples can be recovered by increasing the sample size, the sample size of the GWAS has cost constraints. With large sample sizes of several thousand cases and controls there has been usually limited study power to detect alleles of modest effect sizes (e.g., an odds ratio of 1.20) .
In this regard, incorporation of the multiple phenotypes to the GWAS can be an alternative way to unravel missing heritability in the GWAS and to find pleiotropic genes. Even though the GWAS of multivariate phenotypes are known to enhance the power of the GWAS such an approach has not been well established.
To perform multiple phenotypes based GWAS, application of traditional GWAS approaches has suffered penalties from multiple testing problems caused by testing multiple genome-wide scans of single traits separately. This may diminish the power of GWAS due to elevating heterogeneity and bias in samples. Statistically classic multivariate methods have been applied to GWAS of multivariate phenotypes to tackle in an effective manner. Such methods are likelihood-based mixed effects model (LME) [9,10] and generalized estimating equations (GEE) methods. Liu et al. suggested an extension of the GEE to test association analysis for a mixture of continuous and binary traits . Their work manifested statistical power of bivariate association analysis with two continuous traits, i.e. obesity and osteoporosis. Their method is limited to bivariate traits and applicable to independent samples.
O’Brien model  and its extension , which suggested the integration of results from association tests of single traits of a multivariate phenotype, can work well for a homogeneous mean among individual tests of single traits but not for heterogeneous ones. To overcome this limitation, Yang et al.  improved O’Brien method by use of a sample splitting method and a cross validation method as a screening tool for detecting pleiotropic effects. Previous work has contributed to addressing association tests for multivariate phenotypes. However, there is still no standard method to be free from multiple test problems and be accepted for multivariate phenotypes .
Much work have not investigated what types of single traits can be correlated to induce multivariate phenotypes. In this context, we aimed to discover novel multivariate phenotypes from large scale epidemiological data by a data mining approach and develop a scheme to GWAS of multivariate phenotypes. In our previous work , we reported the discovery of multivariate phenotypes by applying association rule mining over 52 anthropometric and biochemical traits in Korea Association Resource (KARE) population. We showed an analytical scheme for GWAS of the multivariate phenotype lowLDLhighTG, which means a negative relation between low levels of LDL and high levels of TG. Our preliminary results revealed that effect sizes (odds ratios=1.44-2.38) of genetic loci associated with the multivariate phenotype were higher than genetic loci identified in the initial GWAS, while their p-values were less significant than those in the initial GWAS. Those loci cannot be detected within a single trait based framework.
Here, we present a more sophisticated scheme for refining association rules to extract patterns of phenotypic associations and to visualize them graphically. As a case study, we describe the results of GWAS for multivariate phenotype highLDLhighTG combining elevated low density lipoprotein cholesterol (LDL-C) levels and elevated triglyceride (TG) levels, which have an important clinical implication in metabolic syndrome (MS).
An association rule which expresses patterns of multivariate phenotypes encoding partial correlations between single traits specifies quantitative descriptions of the single traits. Association rules can provide explicit boundaries of the single traits of multivariate phenotypes for optimal selection of both cases and controls. This work contributes a methodology for exploration in GWAS analysis of multiple phenotype highLDLhighTG.
We investigated 350K variants in 8,512 individuals in Korea Association Resource (KARE) for performing GWAS of multivariate phenotypes and mining patterns of them. Additional details of quality-control and imputation procedures have been reported in . Gene annotations refer to the human genome build hg18. Of 8,842 individuals in KARE, 1,853 having missing values found in at least one of traits were removed. The individuals were described by a total of 52 traits (see Additional file 1), of which six traits (CRP, AST, ALT, r_gtp, homa, creatin) extremely distributed were removed. The resulting 6,998 individuals with 46 traits were employed in association rule mining.
The problem of discovery of multivariate phenotypes from a set of single traits is transformed into finding frequent patterns of associations of single traits. In our approach we employed Association Rule Mining (ARM)  to discover the patterns of phenotypic associations expressed as association rules. We have previously shown [14,17] that association rules detected by ARM are informative and quantitative and have benefits to interpret their meaning. Association rules have the form R: X → Y [c, s], where X (the Left-hand side or LHS) and Y (the Right-hand side or RHS) are the body and the head of a rule, respectively. c and s stand for confidence and support to measure accuracy of rules. X and Y are disjoint predicates (X ∩ Y = Ø). Each X and Y consists of a conjunction of distinct predicates which describe values of single traits. An association rule expresses association of single traits X and Y and can be derived to a multivariate phenotype.
The strength of the association rules can be measured in terms of their support (s) and confidence (c). The support of a rule (X → Y) is the probability that cases in a database contain both X and Y. The confidence of a rule is the probability that cases contain X can also contain Y. Note that the head of a rule, Y, is restricted to be one of the single traits which we are interested in and X is a set of traits partially correlated with Y. Interesting rules are manually extracted.
We used 10g Oracle Data Miner (ODM) which implemented the APRIORI algorithm  to compute association rules. We set a minimum support and a minimum confidence of 1% and 10%, respectively, to detect rare patterns representing disease predisposing cases more rather common features appeared in normal cases.
If we set threshold too high for support (e.g., 20 %), there may miss many interesting patterns involving the low support with high confidence. Such low support traits may correspond to rare associations of sing traits, but whose patterns are still interesting to know. Most patterns mined characterize common correlations between traits, which are already well known. Domain experts such as biologists may have different interesting traits. Our strategy to find interesting rules is that we set low support threshold, generate as many rules and filter them by user interestingness measurements and interesting traits as user constraints. High confidence rules can misinform and do not consider the support of the traits appearing in the rule head. One way to resolve this problem is to apply a metric known as lift :
which calculates the ratio between the rule’s confidence and support of the single trait Y in the rule consequence. Lift was originally called interest which measures how many times more often X and Y occur together than expected if they are statistically independent.
The following example shows rule form constraints to find interesting association rules containing single traits such as high levels of TG (TG5) and low levels of LDL(LDL1):
R1: ((TG5LHS) (TG5RHS)) ∧ (min_conf ≥ 0.7, lift ≥ 1, min_sup ≥ 0.025),
R2: ((LDL1LHS) (LDL1RHS)) ∧ (min_conf ≥ 0.7, lift ≥ 1, min_sup ≥ 0.025).
We employed graph-based techniques to visualize interesting association rules using igraph package on R 2.12.0. A set of interest association rules represented with an undirected edge weighted graph where vertices represent traits and edges indicate relationships (i.e. associations) between other traits in rules. Vertex size is proportional to degrees of vertices.
A multivariate phenotype(y) is defined as bivariate traits (yi, yj) which can be a mixture of continuous and nominal traits. The multivariate phenotype can be a conjunction of predicates of single traits, as expressed one or more association rules.
y = yi + yj
Association analysis for multivariate phenotype(y) is performed by following tasks:
(1) Test a genome-wide scan for a multivariate phenotype (y): GWAS(y)
(2) Test genome-wide scans for singleton traits: GWAS(yi), GWAS(yj)
(3) Calculate mORps where minus log odds ratio for p-values of SNPs obtained from an association test of a multivariate phenotype(y) over those from a single trait (yi) as follows:
(4) Prune SNPs by filtering strategies (see section strategy for pruning SNPs)
(5) Repeat tasks 2~4 for other single trait (yj)
(6) A final set of SNPs is generated by the intersection of two sets of SNPs survived from filtering steps which prune SNPs more likely to affect either of single traits.
SNPs identified for an association test of a multiple phenotype may include genetic variants more likely affecting each of single traits which should be excluded. Tasks 1 to 4 are subject to filtering steps to identify genetic variants influencing the multivariate phenotype y while the genetic variants much more likely to affect single traits (yi and yj) are excluded by mORpS (vide infra). The mORpS measures the strength of association of a multivariate phenotype against those of single traits.
From a list of results of the association test for a multivariate phenotype, false positives of SNPs are pruned by the following conditions and significant ones remain:
(1) P-values for an association test of multivariate phenotype ≤ 5×10-4
(2) mORPyi ≥ 1 and mORpyj ≥ 1
(3) P-value of an indexed SNP ≤ 10-5 and p-values of clumped SNPs ≤ 10-4 in order to evaluate formation of LD.
There have been no generalized method to deal with the multivariate phenotypes and the cut-off p-value for a significant association in GWAS is not well defined. The cut-off p-value for the multivariate phenotype is set to be less stringent than usual GWAS which mostly set a Bonferroni corrected p-value of 0.05 (P ≤ 1.43×10-7 which is not corrected) since we consider a small sample size for cases and controls due to combination of phenotypes. mORPS ≥1 means that it is 10 times as likely that SNPs are associated with a multivariate phenotype against a single one.
We applied to multivariate phenotype based GWAS to relations between plasma lipid levels for an in-depth study. Positive relations between TG and LDL-C can be specified as multivariate phenotype highLDLhighTG, which indicates high LDL-C of ≥ 130 mg/dl and high TG of ≥ 180mg/dl extracted from 359 rules. Ranges of TG and LDL-C levels for GWAS are adjusted for those meeting the guidelines used in clinical researches.
An association test of highLDLhighTG seeks to identify single shared loci affecting both high levels of LDL-C and TG while excluding ones affecting either of the single traits LDL-C and TG. 545 cases and 680 controls (Table (Table11 and see Additional file 2 for single traits) are selected for GWAS of multivariate phenotype highLDLhighTG. SNPs influencing on either one of TG or LDL-C traits were pruned from a list of significant SNPs associated with highLDLhighTG. Case-control based association scans and LD clumping were performed by PLINK .
Out of a total 3,792,566 rules mined, 765,318 rules of which lift ≥ 1 and confidence ≥ 0.5 were retained. 136,551 rules encoded TG and LDL levels. Of 19,837 rules related to high TG levels, 191 interesting rules represent low LDL-C and high TG in contrast to 509 rules that manifested high TG and high LDL-C levels. Table Table22 denotes the representative association rules (see Additional file 3) and interpretation of rules refer to the previous work .
Association patterns of single traits extracted from 359 rules containing high TG levels were visualized by a connected graph (Figure (Figure1).1). High TG trait ( TG5 in Figure Figure1)1) connected with peculiar nodes representing the 17 distinctive traits: Bone Mineral Density (BMD) measure, distal radius SOS(DS); Blood components, HB, WBC_B, PLAT, and HBA1C; and metabolic syndrome (MS) (Daskalopoulou, et al., 2006) measures, obesity (BMI, WHR and SUP), lipids (LDL, HDL, TCHL, T_HDL, TG and NONHDL), hypertension (SBP and DBP) and insulin resistance (GLU0, INS0, GLU60 and GLU120), post-challenge insulin(INS60 and INS120). The abbreviation of single traits refers to Figure Figure11.
Associations between high TG levels and a cluster of 4 common traits (obesity, insulin resistance, hypertension, and hyperlipidemia) related to MS, were consistent with the fact that MS increases T2D and cardiovascular diseases (CVD) .
One of the noteworthy findings is the association between low DS for the measure of BMD and high TG levels. The associations between low DS and a cluster of MS defined by the four common traits i.e. obesity, hypertension, hyperlipidemia and insulin resistance with high glucose levels and dissociation with insulin levels (INS0, INS60, INS120) were in concordance with newly reported work  that examined an association between MS and bone health. There are negative relations between low DS associated with high levels of lipids including TG, TCHL and LDL and positive relations between low DS with low levels of HDL . More interesting finding was observed in that low DS are associated with high levels of glucose but not with insulin levels although the association between high glucose levels or insulin resistance with BMD has been inconclusive. In contrast, hyperglycemia is known for a predictor of bone loss and osteoporotic fractures . Our finding can be a suggestive evidence that obesity, hypertension and hyperlipidemia among MS related traits might be associated with osteoporosis.
High levels of LDL were shown positive relations with BMI, glucose levels and plasma lipids including TCHL, TG, and NONHDL as well as negative relations with DS. We did not find associations between high LDL levels and insulin levels. Interestingly, highLDL have positive relations with single traits related to renal function such as Blood Urea Nitrogen (BUN) and Sodium in Urine (SONA).
Among multiple phenotypic associations with high TG, we considered the phenotypic associations which subdivided samples into feasible sizes of cases and controls for GWAS. We focused on contradictory relationship between high TG levels (TG5 in Figure 1(a)) with low or high levels of LDL (LDL1 in Figure 1(a) and LDL5 in Figure 1(b)). That is, there are positive correlations: between TG and LDL-C and TCHL; between LDL-C and HDL as well as negative correlations: between TG and LDL-C; between HDL and TG, LDL-C and TCHL. Both single traits, high TG levels and high LDL levels, shared common traits (BMI, PLAT, TCHL, and GLU0) associated with themselves.
Combination of two single traits, high LDL and high TG, introduces multivariate phenotype highLDLhighTG which can amplify association strength with correlated single traits by additive effects of the single traits. Out of 17 associated traits, four traits (DS, GLU0, INS0, and SONA) have more power in distinctively classifying samples of highLDLhighTG into cases and controls (Figure (Figure22).
The associations between the traits can be substantiated in association rules encoding high TG levels (Rules 1~14) and high LDL-C levels (Rules 15-18). The rules were sorted and selected by their confidences.
As seen from above, there exist complicated associations among single traits. Selection of cases and controls based on single traits without considering those associations may increase confounding effects in samples. Compared with single traits based selection of cases and controls, multivariate based approach can have more power to distinguish cases from controls.
We identified total 50 variants associated with highLDLhighTG and 15 are located in six genes (PAK7, C20orf103, NRIP1, BCL2, TRPM3, and NAV1) (Table (Table33 and Figure Figure3).3). It is interesting to know that rs11700112 of PAK7 on 20p12.2 is in a missense mutation by substitution of arginine (CGA) by proline (CCA). Clinical association has not yet been found with this variant. It is located within a LD block (530kb) with other four SNPs, of which two (rs6140956 and rs6133716) are in intronic region of C20orf103. It is worth to note that C20orf103 contains a frameshift mutation at rs72238296, which is 755 bases upstream of rs6140956 in the same gene (Table. (Table.33 and Figure 4(a)). The frameshift mutation is known for a cause of a hypercholesterolemia .
A strong LD block (81kb length) with high r2 values (r2 ≥ 0.90) detected across three SNPs (rs4744611, rs7039780 and rs4744608) (Figure 5(b)) of TRPM3 on chromosome 9 (9q21.11-q21.12) that is relatively close to regions linked to coronary artery disease . Among nine splice variants of TRPM3, splice variants 7 and 8 do not include the three SNPs identified (Figure 5(a)). This observation suggests that SNPs can make different functional effects on splice variants. Although no firm genetic linkage to disease has been established and not much report on the properties of TRPM3, functional activity of TRPM3 is relevant to contractile and proliferating vascular smooth muscle cells. Recent work  investigated the relevance and regulation of TRPM3 in vascular biology and showed that elevated cholesterol can act as a negative regulator of TRPM3.
Two SNPs of BCL2 gene on chromosome 18 (18q21.33) were identified. BCL2, which is involved in a number of cancers including melanoma, breast carcinomas and etc., was recognized as important modulators of cardiac myocyte apoptosis. A distinct support for relevance of BCL2 to cardio vascular disease (CVD) was reported by recent finding  that PPARγ protected cardiac myocytes from oxidative stress and apoptosis through upregulating BCL2 expression.
NRIP1 was reported to have an association with HDL . Recent studies identified a hepatocyte specific role for NRIP1 as a cofactor for LXR in different ways, namely serving as a coactivator in lipogenesis and as a corepressor in gluconeogenesis . NAV1 on chromosome 1q32.1, a human homolog of a C. elegans gene, unc-53, is expressed in adult heart and the developing brain. Clinical association has not been established with it. Our results warrant that variants associated with highLDLhighTG should be evaluated for further study.
It is important to emphasize that LD structures for the six genes across three populations (YRI, CEU, JPT+CHB) are distinct. The pattern of the strongest LD was observed in JPT+CHB among the three. Whereas, the weak pattern of LD was appeared to be in CEU (see Additional file 4).
In silico replication analysis was conducted for the 15 SNPs in two regional subcohorts as well as gender groups (Table (Table4).4). Nine of 15 SNPs associated with highLDLhighTG were well reproducible in regional subcohorts (P < 0.05), while p-values of six SNPs (p ≥ 0.05) were on the borderline statistical significance. Five SNPs in NIRP1 (rs2822994, rs2822998 and rs1041404) and NAVI (rs665770 and rs529581) were more reproducible in both regional subcohorts and gender groups.
Reproducibility of gender difference in the 15 SNPs were as follows: PAK7 and NRIP1 were more effective in women; BCL2, TRPM3 and NAV1 were more reproducible in men. highLDLhighTG was more detectable in women than man (χ2 ≥44.9, p-value = 2.05 × 10 -11). PAK7 and NRIP1 may lead to the gender specific susceptibility in concordance with previous work  reporting more gender-specific effects for CVD in women than men.
Overall distribution of p-values for an association test appeared to be less significant than those for general GWAS. On the other hand, the p-values of significant SNPs identified for multivariate phenotype highLDLhighTG were apparently more significant than those for single traits highLDL and highTG (Figure (Figure6).6). It is noteworthy that effect sizes of the significant SNPs which ranged between modest (odds ratios=1.38-1.60) and intermediate effect sizes were comparable to those for the general GWAS ranged from low to modest ones.
Pleiotropic patterns can be more precisely observed in quantitative trait loci (QTLs) or LD blocks than at SNPs. We examined QTLs and their associated phenotypes for the six genes identified using Phenotype and Disease Association track group in UCSC genome browser. The QTLs and their associated phenotypes were extracted from rat and mouse QTLs from RAT DB and MGI (Mouse Genome Information) (Table (Table55).
The six genes except NRIP1 share QTLs commonly associated traits such as BMD and a cluster of common traits defining MS. Those common traits in MS shared by the six genes are blood pressure, non-insulin dependent diabetes mellitus, renal function, cardiac mass, and body weight. The phenotypic associations of high TG and high LDL levels with low BMD examined through rat and mouse QTL associations except NRIP1 have mapped in the regions of QTLs associated with BMD. Furthermore it can be more support that TRPM3 was mapped to OMIM phenotypes such as osteosclerosis hardening bones, epilepsy, amyotrophic lateral sclerosis (ALS), of which association with CVD was reported in a recent work . Different genetic markers share the same or similar OMIM phenotypes: BCL2 and TRPM3 have in common with associating ALS; PAK7 and NAV1 have in common with similar phenotypes Alzheimer disease (AD) and Parkinson disease (PD) where a cross-talk between MS and AD was reported .
In summary, our results suggest that the genetic markers identified with multivariate phenotype highLDLhighTG have phenotypic associations with common traits in MS. The common traits in MS, particularly hyperlipidemia, may be linked to pathogenic associations with osteosclerosis and neurodegenerative disorders including AD and PD influenced by pleiotropic genetic factors. Thus, the genetic markers identified in our work can have pleiotropic effect on MS, BMD and neurodegenerative disorders.
We explored possible functional relationships between five of six genes associated with highLDLhighTG using STRING, a database of predicted protein-protein interactions (PPI). We obtained 5 different networks of genes interacting with each of five genes by confidence of association evidence (≥ 0.5). Each of the gene networks (Figure (Figure7)7) was mapped to KEGG pathways and examined pathways in common. Four genes i.e. BCL2, NAV1, NIRP1 and TRPM3 interact with genes (CASP7, BACE1, SDHB, TRPC6) in AD and PD pathways, while BCL2 and NIRP1 shared Huntington’s disease as well as AD. In particular, three genes i.e. BCL2, PAK7, and NIRP1 shared pathways in cancer and other pathways, supporting our hypothesis that multivariate phenotypes have common etiology pathways when they are affected by pleiotropic genetic factors.
We have showed a methodology to identify genetic markers associated with multivariate phenotypes derived from patterns of phenotypic associations discovered by ARM. An application of a large scale mining approach to anthropometric and biochemical traits has not been previously reported.
The patterns of phenotypic associations were visualized with connected graphs which were informative to draw relations between plasma lipid levels with BMD and a cluster of common traits (Obesity, hypertension, insulin resistance) related to MS. These putative patterns of the phenotypic associations were in concordance with the fact that MS increases T2D and CVD . More interesting finding was observed in that BMD was associated with high levels of glucose but not with insulin levels although the association between high glucose levels or insulin resistance with BMD has been inconclusive. We suggest that multiple phenotypic associations between plasma lipid levels with BMD and common traits in MS, be affected by the common genes harbouring pleiotropic effects.
For the identification of pleiotropic genes, we derived multivariate phenotype highLDLhighTG from the association patterns of two single traits high LDL and high TG, which subdivided samples into feasible sizes of cases and controls for GWAS. Multivariate phenotype highLDLhighTG increased the strength of phenotypic associations with the correlated single traits by additive effect of multiple single traits. Out of 17 traits linked to single traits high LDL and high TG, four traits (DS, GLU0, INS0, and SONA) have more power in distinctively classifying samples of highLDLhighTG into cases and controls when the single traits were combined into the multivariate phenotype.
Our approach to GWAS of multivariate highLDLhighTG identified 15 SNPs in six genes (PAK7, C20orf103, NRIP1, BCL2, TRPM3, and NAV1). While p-values (9.6 × 10-5 ≤ P ≤ 1.2 × 10-4) of genetic variants in the six genes were less significant than those identified in general GWAS due to limited sizes of the sample those genes were not detectable within univariate framework of the GWAS. Effect sizes (odds raios=1.34-1.60) of the variants ranged between modest and intermediate sizes were comparable to those in the general GWAS. Relevance of the six genes to CVD in MS was apparently explained in previous work.
According to analysis based on rat and mouse QTL DB, our results suggest that the six genes were mapped to QTLs associated with common traits related to MS, supporting that highLDLhighTG represents one of pleiotropic patterns related to MS and the six genes associated with it can influence the pleiotropic effects on MS. In particular, we showed possibility that hyperlipidemia may be linked to pathogenic associations with osteoporosis and neurodegenerative disorders including AD and PD by incorporating associations of OMIM phenotypes with PPI networks for the six genes. We have found that four genes i.e. BCL2, NAV1, NIRP1 and TRPM3 may share AD and PD pathways where interacting genes with them are involved. Three genes i.e. BCL2, PAK7, and NIRP1 also share common pathways in cancer.
Clinical association studies for 4 genes i.e. PAK7, C20orf103, TRPM3 and NAV1 have not yet been found although characteristics of genomic features for the four genes are also suggestive to investigate further study. Our work emphasize that multivariate phenotypes based GWAS can identify pleiotropic genes that share common etiology pathways.
SHP developed the concept and the method. JYL implemented a module for visualizations of association rules with networks and participated in drafting the paper. SK interpreted the results for the point of view of biology. SHP drafted the paper and JYL and SK were contributed to finalize the draft.
The authors declare that they have no competing interests.
Description of traits. A table shows 52 traits and their description and measurement.
Basic characteristics for traits. Baseline characteristics according to means and standard deviations.
Association rules encoding high TG and high LDL levels. Representative association rules encoding high TG and high LDL.
Features for genomic regions and LD structures.
The KARE genotype and epidemiological data were gratefully made available by National Institute of Health, Korea Centre for Disease Control, through the KARE Analysis Consortium. This work was supported by Basic Science Research Program through the National Research Foundation of Korea (NRF) funded by the Ministry of Education, Science and Technology (NRF-2010-0021811).
This article has been published as part of BMC Systems Biology Volume 5 Supplement 2, 2011: 22nd International Conference on Genome Informatics: Systems Biology. The full contents of the supplement are available online at http://www.biomedcentral.com/1752-0509/5?issue=S2.