Dynamic Mechanical Response of Biomedical 316L Stainless Steel as Function of Strain Rate and Temperature

From:

Published online 2011 December 20. doi: 10.1155/2011/173782

Copyright/LicenseRequest permission to reuse: Copyright © 2011 Woei-Shyan Lee et al.
This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Table 2

Work-hardening rate of various alloys at 25°C.

Metal	Strain rate (s⁻¹)	True strain	Work-hardening rate (MPa/unit strain)	Reference
316L stainless steel	1000	0.1	1500	current study
6000 series Al-Sc alloy	1200	0.1	403.2	[28]
Unweldable Al-Sc alloy	1200	0.1	200	[26]
Weldable Al-Sc alloy	1300	0.1	160	[27]
Biomedical Ti alloy	800	0.1	250	[25]

Articles from Bioinorganic Chemistry and Applications are provided here courtesy of
Hindawi Publishing Corporation