PMCCPMCCPMCC

Search tips
Search criteria 

Advanced

 
Logo of actaeInternational Union of Crystallographysearchopen accessarticle submissionjournal home pagethis article
 
Acta Crystallogr Sect E Struct Rep Online. 2010 August 1; 66(Pt 8): o2115.
Published online 2010 July 24. doi:  10.1107/S1600536810028849
PMCID: PMC3007393

Glycine ethyl ester hydro­chloride

Abstract

In the crystal structure of the title compound, C4H10NO2 +·Cl (systematic name: 3-eth­oxy-3-oxopropan-1-aminium chlor­ide), there are strong inter­molecular N—H(...)Cl, C—H(...)Cl and C—H(...)O hydrogen-bonding inter­actions between the free chloride anion and the organic cation, resulting in a two-dimensional supra­molecular network in the ab plane.

Related literature

The title compound is an inter­mediate in the synthesis of dichloro­vinyl­cyclo­propane carb­oxy­lic acid, see: Xue (1995 [triangle]). For related structures, see: Taubald et al. (1984 [triangle]); Gainsford et al. (1986 [triangle]); Eduok et al. (1994 [triangle]).

An external file that holds a picture, illustration, etc.
Object name is e-66-o2115-scheme1.jpg

Experimental

Crystal data

  • C4H10NO2 +·Cl
  • M r = 139.58
  • Monoclinic, An external file that holds a picture, illustration, etc.
Object name is e-66-o2115-efi1.jpg
  • a = 8.965 (3) Å
  • b = 12.543 (4) Å
  • c = 5.972 (2) Å
  • β = 103.630 (5)°
  • V = 652.6 (4) Å3
  • Z = 4
  • Mo Kα radiation
  • μ = 0.50 mm−1
  • T = 123 K
  • 0.33 × 0.33 × 0.23 mm

Data collection

  • Rigaku SPIDER diffractometer
  • 4996 measured reflections
  • 1489 independent reflections
  • 1294 reflections with I > 2σ(I)
  • R int = 0.024

Refinement

  • R[F 2 > 2σ(F 2)] = 0.027
  • wR(F 2) = 0.064
  • S = 1.00
  • 1489 reflections
  • 87 parameters
  • H atoms treated by a mixture of independent and constrained refinement
  • Δρmax = 0.40 e Å−3
  • Δρmin = −0.21 e Å−3

Data collection: RAPID-AUTO (Rigaku, 2004 [triangle]); cell refinement: RAPID-AUTO; data reduction: RAPID-AUTO; program(s) used to solve structure: SHELXS97 (Sheldrick, 2008 [triangle]); program(s) used to refine structure: SHELXL97 (Sheldrick, 2008 [triangle]); molecular graphics: SHELXTL (Sheldrick, 2008 [triangle]); software used to prepare material for publication: SHELXTL.

Table 1
Hydrogen-bond geometry (Å, °)

Supplementary Material

Crystal structure: contains datablocks I, global. DOI: 10.1107/S1600536810028849/bv2143sup1.cif

Structure factors: contains datablocks I. DOI: 10.1107/S1600536810028849/bv2143Isup2.hkl

Additional supplementary materials: crystallographic information; 3D view; checkCIF report

Acknowledgments

This work was supported by the Science Foundation of the Health Department of Jiangsu Province (No. H200934).

supplementary crystallographic information

Comment

The title compound, glycine ethyl ester hydrochloride is used in the preparation of dichlorovinylcyclopropane carboxylic acid, an important pesticide intermediate (Xue,1995).It is also used in the preparation of function material, the crystal structures of dichloro-bis(glycine ethyl ester)-palladium(II) (Taubald,et al., 1984),p,p-(µ2-peroxo) -bis(tris(2-aminoethyl)-amine-N,N',N'',N''')-bis(ethylglycinate-N)-cobalt(II) tetraperchlorate (Gainsford et al., 1986),cis-β2-((s,s)-chloro-(glycine ethyl ester-N)-(triethylenetetramine)-cobalt(III) dichloride trihydrate (Eduok et al., 1994) have been reported. The molecular structure of(I) is shown in Fig.1. The three crystallographically independent N—H moieties are engaged in highly directional N+—H···Cl- hydrogen bonds with three symmetry-related Cl- anions. These interactions promote the formation of a tape of C4H10NO2+.Cl- moieties running parallel to the c axis.

Experimental

Glycine ethyl ester hydrochloride (0.1 mmol, Sigma Aldrich at 99% purity) was dissolved methanol (20 ml) and gently heated under reflux for 1 h. After cooling the solution to ambient temperature, crystals suitable for single-crystal X-ray diffraction were grown by slow evaporation of the solvent after few days.

Refinement

Hydrogen atoms bound to nitrogen and carbon were located at their idealized positions and were included in the final structural model in riding-motion approximation with C—H = 0.98Å and N—H = 0.90 Å. The isotropic thermal displacement parameters for these atoms were fixed at 1.2 (for the -CH2- and -CH3 group) or 1.5 (for the pendant -NH3+ moieties) times Ueq of the atom to which they are attached.

Figures

Fig. 1.
A view of the title compound with the atomic numbering scheme. Displacement ellipsoids were drawn at the 50% probability level.
Fig. 2.
A view of the packing arrangement of the title compound. Hydogran bonds are shown by dashed lines.

Crystal data

C4H10NO2+·ClF(000) = 296
Mr = 139.58Dx = 1.421 Mg m3
Monoclinic, P21/cMelting point: 145(1) K
Hall symbol: -P 2ybcMo Kα radiation, λ = 0.71073 Å
a = 8.965 (3) ÅCell parameters from 1964 reflections
b = 12.543 (4) Åθ = 3.3–27.5°
c = 5.972 (2) ŵ = 0.50 mm1
β = 103.630 (5)°T = 123 K
V = 652.6 (4) Å3Block, colorless
Z = 40.33 × 0.33 × 0.23 mm

Data collection

Rigaku SPIDER diffractometer1294 reflections with I > 2σ(I)
Radiation source: Rotating AnodeRint = 0.024
graphiteθmax = 27.5°, θmin = 3.3°
ω scansh = −10→11
4996 measured reflectionsk = −16→11
1489 independent reflectionsl = −7→7

Refinement

Refinement on F2Secondary atom site location: difference Fourier map
Least-squares matrix: fullHydrogen site location: inferred from neighbouring sites
R[F2 > 2σ(F2)] = 0.027H atoms treated by a mixture of independent and constrained refinement
wR(F2) = 0.064w = 1/[σ2(Fo2) + (0.031P)2 + 0.160P] where P = (Fo2 + 2Fc2)/3
S = 1.00(Δ/σ)max < 0.001
1489 reflectionsΔρmax = 0.40 e Å3
87 parametersΔρmin = −0.21 e Å3
0 restraintsExtinction correction: SHELXL97 (Sheldrick, 2008), Fc*=kFc[1+0.001xFc2λ3/sin(2θ)]-1/4
Primary atom site location: structure-invariant direct methodsExtinction coefficient: 0.011 (3)

Special details

Geometry. All esds (except the esd in the dihedral angle between two l.s. planes) are estimated using the full covariance matrix. The cell esds are taken into account individually in the estimation of esds in distances, angles and torsion angles; correlations between esds in cell parameters are only used when they are defined by crystal symmetry. An approximate (isotropic) treatment of cell esds is used for estimating esds involving l.s. planes.
Refinement. Refinement of F2 against ALL reflections. The weighted R-factor wR and goodness of fit S are based on F2, conventional R-factors R are based on F, with F set to zero for negative F2. The threshold expression of F2 > σ(F2) is used only for calculating R-factors(gt) etc. and is not relevant to the choice of reflections for refinement. R-factors based on F2 are statistically about twice as large as those based on F, and R- factors based on ALL data will be even larger.

Fractional atomic coordinates and isotropic or equivalent isotropic displacement parameters (Å2)

xyzUiso*/Ueq
Cl1−0.00205 (3)0.38254 (2)0.24012 (5)0.01640 (11)
O10.52878 (10)0.38513 (7)0.85715 (16)0.0168 (2)
O20.34886 (10)0.29775 (7)0.59414 (15)0.0171 (2)
N10.11868 (13)0.36318 (9)0.7845 (2)0.0144 (2)
C20.38589 (14)0.35635 (9)0.7575 (2)0.0132 (3)
C10.27318 (14)0.40847 (10)0.8745 (2)0.0136 (3)
H1A0.30560.39651.04290.016*
H1B0.27090.48630.84610.016*
C30.64973 (15)0.34018 (11)0.7579 (2)0.0184 (3)
H3A0.62050.26720.70100.022*
H3B0.74640.33540.87860.022*
C40.67496 (16)0.40810 (11)0.5624 (2)0.0222 (3)
H4A0.58090.40960.43920.027*
H4B0.75890.37820.50290.027*
H4C0.70150.48080.61790.027*
H0A0.0807 (19)0.3806 (11)0.635 (3)0.022 (4)*
H0B0.054 (2)0.3873 (13)0.869 (3)0.035 (5)*
H0C0.1184 (19)0.2925 (15)0.797 (3)0.033 (5)*

Atomic displacement parameters (Å2)

U11U22U33U12U13U23
Cl10.01827 (17)0.01928 (19)0.01196 (16)0.00511 (12)0.00419 (11)0.00078 (11)
O10.0131 (4)0.0206 (5)0.0171 (5)−0.0019 (4)0.0045 (4)−0.0039 (4)
O20.0163 (4)0.0191 (5)0.0157 (5)−0.0003 (4)0.0033 (4)−0.0049 (4)
N10.0149 (5)0.0166 (6)0.0128 (5)−0.0010 (4)0.0055 (4)−0.0022 (4)
C20.0150 (6)0.0120 (6)0.0131 (6)−0.0006 (5)0.0043 (5)0.0027 (4)
C10.0136 (6)0.0132 (6)0.0141 (6)−0.0010 (5)0.0038 (5)−0.0020 (5)
C30.0130 (6)0.0224 (7)0.0202 (7)0.0013 (5)0.0046 (5)−0.0017 (5)
C40.0216 (7)0.0228 (7)0.0252 (7)−0.0032 (5)0.0115 (6)−0.0029 (6)

Geometric parameters (Å, °)

O1—C21.3290 (15)C1—H1A0.9900
O1—C31.4654 (16)C1—H1B0.9900
O2—C21.2040 (15)C3—C41.505 (2)
N1—C11.4762 (16)C3—H3A0.9900
N1—H0A0.902 (17)C3—H3B0.9900
N1—H0B0.906 (19)C4—H4A0.9800
N1—H0C0.890 (18)C4—H4B0.9800
C2—C11.5065 (18)C4—H4C0.9800
C2—O1—C3116.20 (10)C2—C1—H1B109.7
C1—N1—H0A111.7 (10)H1A—C1—H1B108.2
C1—N1—H0B109.8 (12)O1—C3—C4110.89 (11)
H0A—N1—H0B109.0 (16)O1—C3—H3A109.5
C1—N1—H0C111.9 (11)C4—C3—H3A109.5
H0A—N1—H0C108.6 (14)O1—C3—H3B109.5
H0B—N1—H0C105.6 (15)C4—C3—H3B109.5
O2—C2—O1125.54 (12)H3A—C3—H3B108.0
O2—C2—C1123.62 (12)C3—C4—H4A109.5
O1—C2—C1110.83 (11)C3—C4—H4B109.5
N1—C1—C2109.79 (10)H4A—C4—H4B109.5
N1—C1—H1A109.7C3—C4—H4C109.5
C2—C1—H1A109.7H4A—C4—H4C109.5
N1—C1—H1B109.7H4B—C4—H4C109.5
C3—O1—C2—O2−0.45 (18)O1—C2—C1—N1−171.55 (10)
C3—O1—C2—C1−179.62 (10)C2—O1—C3—C486.87 (14)
O2—C2—C1—N19.27 (17)

Hydrogen-bond geometry (Å, °)

D—H···AD—HH···AD···AD—H···A
N1—H0A···Cl10.904 (17)2.300 (17)3.1845 (16)166.1 (12)
N1—H0B···Cl1i0.906 (18)2.386 (18)3.1658 (16)144.3 (15)
N1—H0C···Cl1ii0.890 (19)2.435 (19)3.2566 (16)153.7 (15)
C1—H1A···O2ii0.992.472.9072 (18)106
C3—H3B···Cl1iii0.992.793.7529 (18)164

Symmetry codes: (i) x, y, z+1; (ii) ; (iii) x+1, y, z+1.

Footnotes

Supplementary data and figures for this paper are available from the IUCr electronic archives (Reference: BV2143).

References

  • Eduok, E. E., Kashyap, R. P., Nagl, A., Bourne, S. A. & Watson, W. H. (1994). J. Chem. Crystallogr.24, 627–638.
  • Gainsford, G. J., Jackson, W. G. & Sargeson, A. M. (1986). Aust. J. Chem.39, 1331–1336.
  • Rigaku (2004). RAPID-AUTO Rigaku Corporation, Tokyo, Japan.
  • Sheldrick, G. M. (2008). Acta Cryst. A64, 112–122. [PubMed]
  • Taubald, U., Nagel, U. & Beck, W. (1984). Chem. Ber.117, 1003–1012.
  • Xue, Z. X. (1995). Pesticides, 34, 29–33.

Articles from Acta Crystallographica Section E: Structure Reports Online are provided here courtesy of International Union of Crystallography