Search tips
Search criteria 


Logo of nanoreslettspringer open web sitethis articlemanuscript submissionregistrationjournal front pagespringer open web site
Nanoscale Res Lett. 2010; 5(3): 597–602.
Published online 2009 December 25. doi:  10.1007/s11671-009-9512-6
PMCID: PMC2893928

Well-aligned Nickel Nanochains Synthesized by a Template-free Route


Highly uniform and well-aligned one-dimensional Ni nanochains with controllable diameters, including 33, 78, and 120 nm, have been synthesized by applying an external magnetic field without any surface modifying agent. The formation can be explained by the interactions of magnetic dipoles in the presence of applied magnetic field. Magnetic measurements demonstrate that the shape anisotropy dominates the magnetic anisotropy. The demagnetization factor, [increment]N, is in the range of 0.23–0.36.

Keywords: Ni nanostructure, Magnetic anisotropy, X-ray absorption spectroscopy, Electron microscopy


In the past few years, magnetic nanostructures have aroused considerable interests due to their exceptional properties and potential applications in catalysis, sensors, high-density magnetic records, bio-imaging, and many other domains [1-6]. Because most physical and chemical properties of these nanoparticles depend on their sizes and shapes, the shape control of nanostructures has become a new and interesting research field [7-9]. In particular, one-dimensional (1D) magnetic nanostructures have become one of the focused points [10-13].

Recently, magnetic field-assisted hydrothermal process has been proven to be an efficient way for directing the growth of 1D magnetic material [14-18]. However, previous investigations indicated that the surfactants such as polyvinyl pyrrolidone, hexadecylamine, and cetyltrimethyl ammonium bromide were still necessary, and the diameters of the fabricated nanochains were usually larger than 100 nm [15,18-20]. Template-free magnetic field-induced synthesis of well-aligned Ni nanochains with smaller diameters has rarely been reported [14].

Hence, in this work, we proposed a magnetic field-induced solution-phase synthesis and self-assembly approach of aligned Ni nanochains using environment-friendly reagents. The growth mechanism and the magnetic anisotropy of the Ni nanochains have been discussed in terms of the applied magnetic field.


Setup and Apparatus

Figure Figure1a1a shows a simple sketch for the setup (drawn not to scale). The magnetic poles have a diameter of 10 cm with a distance of about 8 cm in between. A magnetic field from 0 to 5 kOe is available between the poles for the experiment by supplying an electric current from 0 to 10 A to the coils. A three-necked flask wrapped with a heating tape is placed in the center between the magnetic poles for the field-induced synthesis of Ni nanochains.

Figure 1
a A simple sketch for the setup. A homogenous magnetic field from 0 to 5 kOe is available for the experiment by varying the electric current from 0 to 10 A. b Flowchart for a typical synthesis process

Magnetic field-induced Synthesis of Nickel Nanochains

All chemicals used in this experiment were analytical grade and used without further purification. In a typical experiment, 40 ml ethylene glycol (EG) was first put into a three-necked flask and heated up to 120°C by a heating tape. Then a 0.4-ml solution of hydrated hydrazine (50%) was added and maintained at 120°C for 5 min. An external magnetic field (5 kOe) was applied, and 20-ml as-prepared NiCl2·6H2O solution of 6 × 10−4 mol/l (2.9 mg, dissolved in 20 ml EG, room temperature) was added into the flask. The whole solution was stirred by flowing N2 gas of 20 ml/min at all times. After refluxing for 1 h, a black product was obtained, filtrated, and then rinsed with ethanol and deionized water for 5–6 times. The synthesis process is summarized in the flowchart in Fig. Fig.1b1b.

In this report, three nickel nanochains with average diameters of 33 ± 3 (sample 1), 78 ± 8 (sample 2), and 120 ± 12 nm (sample 3) have been synthesized at temperature of 150, 120, and 90°C, respectively. More than three runs have been made for reproduction at each fixed temperature and magnetic field. The diameter of the nanochains is analyzed statistically from the images of about 100 randomly selected nanochains appeared in a scanning electron microscopy (SEM) micrograph of the sample. The standard deviation is determined as about 10%. The influence of the applied magnetic field on the morphologies of the nanochains has also been investigated.

Magnetic field-induced Reorientation of Nickel Nanochains

To obtain well-aligned Ni nanochains array, freshly synthesized nickel nanochains were each dispersed in ethanol and ultrasonically washed for 10 min. Then, the suspension was dropped onto the silicon slice under a 2-kOe magnetic field and dried in air.

Characterization Methods

The structural and chemical information of the as-prepared products was studied using X-ray diffraction (XRD, X’Pert Pro MPD system, Cu Kα), scanning electron microscopy (SEM, S-4800, Hitachi Company), transmission electron microscopy (TEM, 2100F, JEOL Company) equipped with an energy dispersive X-ray spectroscopy (EDS) apparatus, and X-ray absorption spectroscopy (XAS) with sample current in total electron yield mode at SINS beamline at Singapore Synchrotron Light Source [21]. For the XRD and XAS measurements, powder samples were used. The SEM micrographs were taken with the nanochains dispersed over the silicon substrates. For the TEM, high-resolution TEM (HRTEM) observations and EDS analysis, the as-grown nanochains were dispersed in ethanol and dropped onto a carbon film supported on a copper grid and dried in air. Magnetic properties of the as-synthesized nanochains were measured using a superconducting quantum interference device (SQUID) magnetometer (Quantum Design), with the nanochains prepared over the silicon substrates.

Results and Discussions

Detailed results of characterization for sample 1 are presented as follows. Figure Figure2a,2a, ,2b2b shows typical morphologies of the as-prepared samples obtained without and with magnetic field of 5 kOe at 150°C, respectively. Curly interlaced net-like chain structures synthesized without magnetic field are vivid in Fig. Fig.2a,2a, with diameters of 35 ± 5 nm and lengths of up to 500 nm. Figure Figure2b2b shows the sample (sample 1) synthesized under an external 5-kOe magnetic field. The nanochains are axially aligned and relatively uniform in size (33 ± 3 nm in diameter, and 1–2 μm in length). The morphologies are obviously different without and with the presence of applied field, as revealed by Fig. Fig.2a,2a, ,2b,2b, attributed to the field-driven alignment effect. For the axially aligned sample shown in Fig. Fig.2b,2b, the random orientation of the freshly synthesized nanochains is mainly caused by the stirring and rinsing processes in the experiment. These axially aligned Ni nanochains can be orderly reoriented by drying a droplet of sample solution, which is prepared by dispersing the nanochains in ethanol, over the silicon substrate in the presence of an applied field (20 kOe), as shown in Fig. Fig.2c.2c. This reveals the dipolar properties of the whole nanochain along the chain axis. For each individual nanochain, the local direction of the nanoparticles deviates from the axial direction with a small angular distribution, which is expected to be of a Gaussian type [18]. The crystal phase of all the samples was examined by using X-ray diffraction technique. A typical X-ray diffraction result of sample 1 is shown in Fig. Fig.2d.2d. The observed X-ray reflections can be well indexed with lattice parameters of face-centered cubic (f.c.c.) Ni (JCPDF No. 04-0850).

Figure 2
Typical SEM micrographs of nickel nanochains. a without magnetic field showing a dendritic morphology, b with a magnetic field of 5 kOe applied during the synthesis process, showing an axially aligned structure, c reorientation of the axially aligned ...

The chemical compositions of the as-synthesized sample were characterized by EDS. Figure Figure3a3a is for the EDS spectrum of sample 1. It reveals that the as-synthesized nanochains are metallic Ni, except that the carbon and copper peaks from the carbon film and copper grid. XAS investigation further supports the metallic nature of the sample. The spectra have been normalized at far end somewhere without subtraction of the step function [21], as shown in Fig. Fig.3b.3b. The L2, 3-edge XAS spectrum of the nanochains is consistent with those of pure metallic Ni foil except that the L2, 3 peak intensities in our experiment are ~30% stronger. Hence, the nanochains have more 3d holes than the metallic Ni foils, which is attributable to the small size effect [22].

Figure 3
a EDS profile and b L-edge XAS spectrum of the as-synthesized nickel nanochains (sample 1). The XAS spectrum has been normalized at far end somewhere without subtraction of the step function [21]

To characterize the microstructure, we carried out TEM and HRTEM investigations. Figure Figure4a4a shows a typical bright-field TEM image of a single nanochain (sample 1) corresponding to the nanochains shown in Fig. Fig.2b.2b. The single particle and the joint part of two adjacent nanoparticles, which are marked with frames “I” and “II” in Fig. Fig.4a,4a, are further investigated by HRTEM and are shown in Fig. Fig.4b,4b, ,4c,4c, respectively. Lattice fringes throughout the entire HRTEM images reveal the crystalline nature of the nanoparticle. The interplanar spacing in Fig. Fig.4b,4b, ,4c4c is measured to be 0.203 and 0.176 nm, which agree well with those between {111} and {200} planes of Ni crystal, respectively. Detailed investigations reveal that each individual nanoparticle essentially consists of several single-crystalline grains with a typical size of 10–20 nm. The observed size of the grain agrees well with the estimated value about 14 nm from the XRD data using Scherrer’s equation. The selected area electron diffraction (SAED) pattern of the as-prepared nanochains (inset of Fig. Fig.4b)4b) confirms that the synthesized nanomaterial is metallic Ni with f.c.c. structure.

Figure 4
a TEM image of an individual Ni nanochain. b and c HRTEM images of areas “I” and “II” in a. The inset of b is the corresponding SAED pattern

As illustrated in Fig. Fig.5,5, a three-step model is proposed to explain the growth mechanism of the well-aligned Ni nanochains. In the first step, the primary Ni nanocrystallites nucleate and grow. Then, they aggregate to form nanoparticles, the size of which depends on the reaction temperature, hence is dictated mainly by the thermal agitation energy. Finally, these nanoparticles reach the size of thermal equilibrium and are self-assembled into nanochains by the alignment effect in the applied magnetic field. In this formation process, the competition between the magnetic field energy and the thermal agitation energy of the nanoparticles plays an important role. Without the magnetic field, the dendrite structure is observed, as shown in Fig. Fig.2a.2a. The thermal agitation energy dominates the thermodynamic driving forces and results in a structure of random alignment [23].

Figure 5
Schematic diagram for the growth mechanism of the Ni nanochains. a Processes of nucleation and growth, b aggregation processes, c self-assembly processes for the chain formation in dendritic morphology, and d under applied magnetic field for the formation ...

The in-plane field-dependent magnetization of the samples was measured by a SQUID magnetometer, with the applied field parallel and perpendicular to the direction of the aligned nanochains on the silicon substrate. The hysteresis loops measured at 5 K are plotted in Fig. Fig.6,6, for (a) sample 1 with diameter of 33 ± 3 nm, (b) sample 2 with diameter of 78 ± 5 nm, and (c) sample 3 with diameter of 120 ± 12 nm. The diamagnetic background of the Si-substrate, with the susceptibility χ = −1.6 × 10−8 emu/Oe, as shown in the upper left inset of Fig. Fig.6a,6a, has been subtracted. There is obvious difference between the two hysteresis curves, i.e., the tilting of the open loops, attributed to the shape anisotropy [24,25]. To estimate the anisotropy by the expression, K = μ0MSHA/2 [26], the saturation magnetization of the bulk value of Ni, MS = 485 emu/cm3, is adopted, and the anisotropy field HA ~ 1.5 kOe is determined in Fig. Fig.6a,6a, at which the curves of the parallel and perpendicular loops bifurcate. The anisotropy is then obtained as K ~ 3.6 × 104 J/m3. It is larger than the bulk value of magneto-crystalline anisotropy, ~4.5 × 103 J/m3, by one order of magnitude. Obviously, the shape anisotropy dominates the magneto-crystalline anisotropy in this case. The demagnetization factor of the shape anisotropy is determined as [increment]N ~ 0.24 according to the expression K = ½ μ0[increment]NMS2. For samples 2 and 3, the anisotropy fields HA are determined as ~1.5 and 2.0 kOe in Fig. Fig.6b,6b, ,6c,6c, respectively. The corresponding demagnetization factors thus obtained are [increment]N ~ 0.24 and 0.32. These values are slightly larger than that of 50-nm nickel nanochains in a powder collection [27], [increment]N ~ 0.19, and is about the same as that of nickel nanowires [28], with the size of about 12–50 nm, [increment]N = 0.23–0.36.

Figure 6
In-plane field-dependent M(H) curves measured at T = 5 K, with the applied field perpendicular (solid square) and parallel (open circle) to the axial direction of the nanochains with the sizes of a 33 ± 3 nm, b 78 ± 5 nm, and c 120 ± ...

For the axially aligned nanochains dispersed over the Si-substrate as shown in Fig. Fig.2c,2c, an interesting feature is observed. The nanochains appear to bundle up, 5 or 6 in each bundle. This is an indication that there exists intra-chain dipolar interaction which is likely to be of antiferromagnetic ordering, as revealed by the work of Bliznyuk et al. [29]. This is an interesting issue to study. However, it is difficult to show evidence for this property by the magnetization measurements alone in the present work.


A facile and effective field-induced method has been employed to prepare highly uniform, size-controllable, well-aligned Ni nanochains without any surface active agent. The formation can be explained by the interactions of magnetic dipoles in the presence of applied magnetic field. In-plane M(H) curves with the applied field parallel and perpendicular to the direction of the aligned nanochains indicate that the shape anisotropy is a significant factor for the magnetization reversal. The greatly enhanced magnetic anisotropy of the well-aligned magnetic nanochains implies their potential applications in the fields of magnetic records, magnetic switches, etc.


This work was supported by the National Natural Science Foundation of China (Nos. 50671003 and 10874006), the National Basic Research Program of China (Nos. 2009CB939901 and 2010CB934601), and the Program for New Century Excellent Talents in University (NCET-06-0175).

Open Access

This article is distributed under the terms of the Creative Commons Attribution Noncommercial License which permits any noncommercial use, distribution, and reproduction in any medium, provided the original author(s) and source are credited.


  • Frey NA, Peng S, Cheng K, Chem. 2009. p. 2532. COI number [1:CAS:528:DC%2BD1MXhtVSlsLbF] [PMC free article] [PubMed] [Cross Ref]
  • Reiss G, Hutten A. Nat Mater. 2005. p. 725. COI number [1:CAS:528:DC%2BD2MXhtVGgu7%2FJ]; Bibcode number [2005NatMa...4..725R] [PubMed] [Cross Ref]
  • Wang C, Daimon H, Sun SH. Nano Letters. 2009. p. 1493. COI number [1:CAS:528:DC%2BD1MXis1Glsbc%3D]; Bibcode number [2009NanoL...9.1493W] [PubMed] [Cross Ref]
  • Harbuzaru BV, Corma A, Rey F, Angewandte Chemie-Int. 2008. p. 1080. COI number [1:CAS:528:DC%2BD1cXhvFSitLg%3D] [PubMed] [Cross Ref]
  • Hassoun J, Panero S, Simon P, Adv. 2007. p. 1632. COI number [1:CAS:528:DC%2BD2sXnsVagsbo%3D] [Cross Ref]
  • Wang RM, Dmitrieva O, Farle M, Phys. 2008. p. 017205. COI number [1:STN:280:DC%2BD1c7jtFarsA%3D%3D]; Bibcode number [2008PhRvL.100a7205W] [PubMed] [Cross Ref]
  • Wang YH, Wei W, Maspoch D, Nano. 2008. p. 3761. COI number [1:CAS:528:DC%2BD1cXht1yiurbJ]; Bibcode number [2008NanoL...8.3761W] [PubMed] [Cross Ref]
  • Lee HBR, Gu GH, Son JY, Small. 2008. p. 2247. COI number [1:CAS:528:DC%2BD1MXnvF2l] [PubMed] [Cross Ref]
  • Wang N, Guo L, He L, Small. 2007. p. 606. COI number [1:CAS:528:DC%2BD2sXktFGnt7k%3D] [PubMed] [Cross Ref]
  • Sandoval L, Urbassek HM. Nano. 2009. p. 2290. COI number [1:CAS:528:DC%2BD1MXlslOru7o%3D]; Bibcode number [2009NanoL...9.2290S] [PubMed] [Cross Ref]
  • Mahan GD. Phys. 2009. p. 016801. COI number [1:STN:280:DC%2BD1M7ot1Okuw%3D%3D]; Bibcode number [2009PhRvL.102a6801M] [PubMed] [Cross Ref]
  • Zhou W, Zheng K, He L, Nano. 2008. p. 1147. COI number [1:CAS:528:DC%2BD1cXjs1Gjs7Y%3D]; Bibcode number [2008NanoL...8.1147Z] [PubMed] [Cross Ref]
  • Du N, Zhang H, Chen B, Adv. 2007. p. 4505. COI number [1:CAS:528:DC%2BD1cXhtVWmsr0%3D] [Cross Ref]
  • Hu HL, Sugawara K. Chem. 2009. p. 184. COI number [1:CAS:528:DC%2BD1MXovFOis70%3D]; Bibcode number [2009CPL...477..184H] [Cross Ref]
  • Jia BP, Gao L. J. Phys. Chem. C Nanomater. Interfaces. 2008. p. 666. COI number [1:CAS:528:DC%2BD2sXhsVOnt7fP]
  • Zhang JG, Chen J, Wang ZX. Mater. 2007. p. 1629. COI number [1:CAS:528:DC%2BD2sXislCmsbk%3D] [Cross Ref]
  • He ZB, Shu-Hong Y, Zhou XY, Adv. 2006. p. 1105. COI number [1:CAS:528:DC%2BD28XlsVKjsrc%3D] [Cross Ref]
  • Niu HL, Chen QW, Ning M, J. Phys. Chem. B. 2004. p. 3996. COI number [1:CAS:528:DC%2BD2cXhsl2jsrs%3D] [Cross Ref]
  • Wang JH, Ma YW, Watanabe K. Chem. 2008. p. 20. [Cross Ref]
  • Zhang X, Liu WM. Mater. 2008. p. 2100. COI number [1:CAS:528:DC%2BD1cXnsVSrs7w%3D] [Cross Ref]
  • Yu XJ, Wilhelmi O, Moser HO, J. 2005. p. 1031. [Cross Ref]
  • Mattheiss LF, Dietz RE. Phys. Rev. B. 1980. p. 1663. COI number [1:CAS:528:DyaL3cXlslKit70%3D]; Bibcode number [1980PhRvB..22.1663M] [Cross Ref]
  • Gao JH, Zhang B, Zhang XX, Angewandte Chemie-Int. 2006. p. 1220. COI number [1:CAS:528:DC%2BD28XhvFyjsr8%3D] [PubMed] [Cross Ref]
  • Liu ZW, Chang PC, Chang CC, Adv. 2008. p. 1573. [Cross Ref]
  • Yanes R, Chubykalo-Fesenko O, Kachkachi H, Phys. Rev. B. 2007. p. 064416. Bibcode number [2007PhRvB..76f4416Y] [Cross Ref]
  • Skomski R. J. 2003. p. R841. COI number [1:CAS:528:DC%2BD3sXltleqsrc%3D]; Bibcode number [2003JPCM...15R.841S] [Cross Ref]
  • He L, Zheng WZ, Zhou W, J. 2007. p. 036216. Bibcode number [2007JPCM...19c6216H] [Cross Ref]
  • Paulus PM, Luis F, Kroll M, J. 2001. p. 180. COI number [1:CAS:528:DC%2BD3MXhs1WisrY%3D]; Bibcode number [2001JMMM..224..180P] [Cross Ref]
  • Bliznyuk V, Singamaneni S, Sahoo S, Nanotechnology. 2009. p. 105606. COI number [1:STN:280:DC%2BD1Mzitl2jsQ%3D%3D]; Bibcode number [2009Nanot..20j5606B] [PubMed] [Cross Ref]

Articles from Nanoscale Research Letters are provided here courtesy of Springer