|Home | About | Journals | Submit | Contact Us | Français|
Mannans are one of the key polymers in hemicellulose, a major component of lignocellulose. The Mannan endo-1,4-β-mannosidase or 1,4-β-D-mannanase (EC 18.104.22.168), commonly named β-mannanase, is an enzyme that can catalyze random hydrolysis of β-1,4-mannosidic linkages in the main chain of mannans, glucomannans and galactomannans. The enzyme has found a number of applications in different industries, including food, feed, pharmaceutical, pulp/paper industries, as well as gas well stimulation and pretreatment of lignocellulosic biomass for the production of second generation biofuel. Bacillus licheniformis is a Gram-positive endospore-forming microorganism that is generally non-pathogenic and has been used extensively for large-scale industrial production of various enzymes; however, there has been no previous report on the cloning and expression of mannan endo-1,4-β-mannosidase gene (manB) from B. licheniformis.
The mannan endo-1,4-β-mannosidase gene (manB), commonly known as β-mannanase, from Bacillus licheniformis strain DSM13 was cloned and overexpressed in Escherichia coli. The enzyme can be harvested from the cell lysate, periplasmic extract, or culture supernatant when using the pFLAG expression system. A total activity of approximately 50,000 units could be obtained from 1-l shake flask cultures. The recombinant enzyme was 6 × His-tagged at its C-terminus, and could be purified by one-step immobilized metal affinity chromatography (IMAC) to apparent homogeneity. The specific activity of the purified enzyme when using locust bean gum as substrate was 1672 ± 96 units/mg. The optimal pH of the enzyme was between pH 6.0 - 7.0; whereas the optimal temperature was at 50 - 60°C. The recombinant β-mannanase was stable within pH 5 - 12 after incubation for 30 min at 50°C, and within pH 6 - 9 after incubation at 50°C for 24 h. The enzyme was stable at temperatures up to 50°C with a half-life time of activity (τ1/2) of approximately 80 h at 50°C and pH 6.0. Analysis of hydrolytic products by thin layer chromatography revealed that the main products from the bioconversion of locus bean gum and mannan were various manno-oligosaccharide products (M2 - M6) and mannose.
Our study demonstrates an efficient expression and secretion system for the production of a relatively thermo- and alkali-stable recombinant β-mannanase from B. licheniformis strain DSM13, suitable for various biotechnological applications.
The Mannan endo-1,4-β-mannosidase or 1,4-β-D-mannanase (EC 22.214.171.124), commonly named β-mannanase, is an enzyme that can catalyze random hydrolysis of β-1,4-mannosidic linkages in the main chain of β-1,4-mannans, glucomannans and galactomannans; thus it transforms the abundant heteromannans to manno-oligosaccharides [1,2] and a small amount of mannose, glucose and galactose . Mannan endo-1,4-β-mannosidases are produced by a number of plants, bacteria, fungi, and by various invertebrates. The enzyme has found a number of applications in different sectors , including food, feed, pharmaceutical, and pulp/paper industries, gas well stimulation , as well as pre-treatment of lignocellulosic biomass for the production of second generation biofuel . The application of mannan endo-1,4-β-mannosidase for the production of prebiotic manno-oligosaccharides from cheap agricultural by-products such as copra has recently gained significant interests [5-8].
Bacillus licheniformis is a Gram-positive endospore-forming microorganism that belongs to the B. subtilis group of the genus Bacillus. It is generally non-pathogenic and has been used extensively for large-scale industrial production of exoenzymes such as subtilisins or amylase, and the antibiotic bacitracin . Recently, the genome of B. licheniformis strain DSM13 has been reported and it was revealed that it contains many new genes of potential interest for biotechnological applications . So far, there has been no previous report on the cloning and expression of mannan endo-1,4-β-mannosidase gene (manB) from B. licheniformis; however, there were some preliminary reports on the property of native enzymes [11,12]. In this work manB from B. licheniformis strain DSM13, which has been used extensively in industry, was cloned and overexpressed using an Escherichia coli expression system . The recombinant enzyme was highly expressed and efficiently secreted into the periplasmic space and subsequently into the culture medium. Amino acid sequence analysis revealed that the enzyme belongs to the glycosyl hydrolase family GH26 . The properties of the recombinant enzyme are also reported, and our results demonstrate that recombinant mannan endo-1,4-β-mannosidase from B. licheniformis is thermo- and alkali-stable, and thus suitable for various industrial applications.
The oligonucleotide primers for cloning of the manB gene encoding mannan endo-1,4-β-mannosidase from B. licheniformis DSM13 were designed from its complete genomic database, according to the DNA sequence of gene ydhT (NCBI accession number NC006322), encoding a hypothetical protein similar to mannan endo-1,4-beta-mannosidase. The gene was cloned into the pFLAG expression vector such that the hypothetical native signal peptide was replaced with the E. coli OmpA signal peptide included in this vector. This allows the secretion of the recombinant enzyme into the periplasmic space and subsequently into culture broth. In addition, the DNA sequence encoding a hexahistidine together with a stop codon was incorporated into the reverse primers to create a His-tagged fusion enzyme to facilitate further purification. The manB gene was under control of the tac promoter and could be induced for high expression using Isopropyl β-D-1-thiogalactopyranoside (IPTG). Amino acid sequence analysis revealed that the mannan endo-1,4-β-mannosidase from B. licheniformis has a theoretical molecular mass of 41 kDa, and belongs to glycosyl hydrolase family GH26, according to the CAZy (CArbohydrate-Active EnZymes) databank . This family is a member of clan Glyco hydro tim or TIM barrel glycosyl hydrolase (GH) superfamily, which comprises 26 members, including α-amylase and cellulase. The deduced amino acid sequence alignment of B. licheniformis mannan endo-1,4-β-mannosidase with other bacterial β-mannanases from family 26 is shown in Fig. Fig.1.1. The enzyme shows the classical TIM (β/α)8-barrel architecture. The catalytic domains of GH26 members are located at the C-terminus, and conserved amino acid residues of this glycosyl hydrolase family are also shown in Fig. Fig.1.1. The mannan endo-1,4-β-mannosidase from B. licheniformis is highly similar to ManB from B. subtilis Z-2  and B. subtilis strain 168  with 82% identity, whereas its similarity to GH26 β-mannanases from other bacterial species is significantly less (11-20% identity).
The recombinant mannan endo-1,4-β-mannosidase produced in this study was fused with the E. coli OmpA signal peptide and thereby could be efficiently secreted into the periplasmic space and culture medium as has been previously reported for this expression system and various secreted Bacillus-derived enzymes . Both the efficient expression and extracellular location after induction with IPTG are evident from Fig. Fig.2.2. At 4 h after induction, a large fraction of the recombinant enzyme was accumulated in the periplasmic space, and after inducing overnight, more enzymes could be found in the culture medium than in the periplasmic space. Comparison of the yield of recombinant B. licheniformis mannan endo-1,4-β-mannosidase in different compartments at various induction conditions in shake flask is given in Table Table1.1. The highest specific activity could be obtained from perisplasmic extract after induction with 0.5 mM IPTG overnight, whereas the largest total activity could be obtained from the three fractions after induction with 1 mM IPTG for 4 h. Nevertheless, other conditions yield only slightly different results. Routinely, we obtained 45 - 50,000 U of total mannan endo-1,4-β-mannosidase activity from a 1-l shake flask culture. To prepare the enzyme for purification and analysis in the next step, we preferred to use the cytoplasmic and especially the periplasmic extract, as the enzyme was highly concentrated, facilitating the subsequent affinity purification step.
The crude enzyme from the periplasmic extract was used for affinity purification on Ni-NTA agarose. The enzyme could be purified to apparent homogeneity using this one-step purification protocol as shown by SDS-PAGE analysis (Fig. (Fig.3,3, panel A). Mannan endo-1,4-β-mannosidase activity of the purified enzyme was shown by in-gel activity staining (Fig. (Fig.3,3, panel B) as well as by the standard β-mannanase assay. Recombinant ManB showed a molecular mass of approximately 45 kDa on SDS-PAGE, confirming the theoretical mass of 41 kDa. The specific activity of the homogenous enzyme was 1672 ± 96 U/mg under the standard assay conditions. We routinely obtained a total of approximately 40,000 U of purified enzyme (equivalent to < 25 mg) from 1-l cultures.
The optimal pH of mannan endo-1,4-β-mannosidase activity from B. licheniformis was at pH 6.0 - 7.0 (Fig. (Fig.4,4, panel A). Notably, the enzyme shows a significant activity up to pH 9.0, and is more active at this pH when using glycine buffer than potassium phosphate buffer. The enzyme was stable within pH 5 - 12 after incubation for 30 min at 50°C (Fig. (Fig.4,4, panel B), and within pH 6 - 9 after incubation at 50°C for 24 h (Fig. (Fig.4,4, panel C). The optimal temperature for ManB activity was 50 - 60°C for the 5-min assay (Fig. (Fig.4,4, panel A). The enzyme was stable up to 55°C after incubation for 30 min at pH 6.0 (Fig. (Fig.5,5, panel B). In addition, it showed a half-life time of activity, τ1/2 of approximately 80 h at 50°C and pH 6.0, while τ1/2 decreased considerably to only 3 min at 60°C (Fig. (Fig.5C5C).
The relative activity of ManB from B. licheniformis for various substrates was determined as shown in Table Table2.2. The enzyme exhibited highest activity on glucomannan prepared from konjac followed by pure 1,4-β-D-mannan and the galactomannan locust bean gum (LBG). The activity of the enzyme with highly substituted galactomannan from guar gum and copra meal was negligible when using the standard assay. However, we found that partial hydrolysis of copra meal after incubation occurred after incubation of this substrate with the enzyme for 2 to 3 days (data not shown).
Furthermore, the kinetic constants for the hydrolysis of selected substrates were determined. Because of the extremely high viscosity of LBG solutions, especially at higher concentrations necessary for the determination of the kinetic constants, low-viscosity LBG was prepared by partial hydrolysis  and used as a substrate in addition to glucomannan from konjac and pure 1,4-β-D-mannan. When present in saturating concentrations, low-viscosity LBG was the preferred substrate as judged both from the highest turnover number kcat and specificity constant kcat/Km (Table (Table33).
Product analysis by TLC after hydrolysis of various substrates confirmed that the recombinant enzyme is indeed an endo-β-mannanase. Various manno-oligosaccharide products (M2 - M6) as well as mannose were found after enzymatic hydrolysis of locust bean gum and mannan (Fig. (Fig.6).6). When mannohexaose (M6) was used as a substrate (Fig. (Fig.7),7), the main products were M2, M3 and M4, suggesting random hydrolysis of this oligosaccharide. After extensive overnight digestion, mannose (M1) could be observed as well. Analysis of hydrolysis products when using different manno-oligosaccharides (M2 - M5) as substrates revealed that ManB from B. licheniformis cannot cleave mannobiose, mannotriose or mannotetraose, whereas mannopentaose was hydrolysed only after extensive incubation overnight, generating M2 and M3 as products (Fig. (Fig.77).
B. licheniformis strain DSM13 was used as the source for the isolation of the mannan endo-1,4-β-mannosidase gene, manB since this strain has been used extensively for large-scale production of various industrial enzymes including serine protease (subtilisin) or α-amylase . The genome of strain DSM13 has recently been sequenced, and a number of new genes of potential biotechnological applications have been identified . The mannan endo-1,4-β-mannosidase gene was cloned by PCR cloning, using primers designed from the published genome database. This is the first report on the cloning, expression, and characterization of recombinant mannan endo-1,4-β-mannosidase from B. licheniformis. Other reports on recombinant Bacillus mannan endo-1,4-β-mannosidases were dealing with enzymes from B. subtilis [16,19-23]. B. stearothermophilus , and B. circulans .
Mannan endo-1,4-β-mannosidases can be classified into two distinct families, glycosyl hydrolase (GH) family 5 and 26, based on amino acid sequence similarities and hydrophobic cluster analysis . Family GH5 was formerly known as cellulase family A and encompasses diverse enzymes , whereas glycosyl hydrolase family 26 comprises only members with mannan endo-1,4-β-mannosidase (EC 126.96.36.199) and β-1,3-xylanase (EC 188.8.131.52) activities . Amino acid sequence analysis of mannan endo-1,4-β-mannosidase from B. licheniformis revealed that the enzyme belongs to family GH26. In addition, we also cloned and expressed the mannan endo-1,4-β-mannosidase gene (manB) from B. licheniformis strain DSM 8785. The two enzymes have only one amino acid different, and the properties of these two heterologously expressed recombinant enzymes are identical (data not shown).
The expression and production of the recombinant mannan endo-1,4-β-mannosidase reported here is based on a previously published E. coli expression system . The mature mannan endo-1,4-β-mannosidase gene was fused to the E. coli ompA signal sequence and is under the control of tac promoter. Thus, the enzyme could be efficiently secreted, and harvested from the culture medium, periplasm, or cell lysate fraction, depending on the culture condition. When the gene was induced for over-expression by 1 mM IPTG for 3 - 4 h, we routinely obtained about 25 mg of recombinant enzyme from the cytoplasmic and periplasmic extracts of 1-liter cultures, which contain more than 40,000 units of purified enzyme. Under the induction with IPTG, a significant fraction of the enzyme was still found in the cytosol. This could indicate that the over-expressed enzyme possibly saturates the bacterial secretion system . It should be mentioned that no optimization aiming at increased enzyme yields was performed. Thus, by applying optimized culture and induction conditions together with a suitable fermentation strategy, considerably higher recombinant protein yields can be expected. Thus, our expression system is highly efficient for expression of bacterial β-mannanses and should be applicable for other enzymes as well. More importantly, the extracellular location of the enzyme might be of interest for large-scale cultivations as it circumvents the necessity of cell disruption.
Mannan endo-1,4-β-mannosidases are active on various mannans and substituted mannans, but display negligible to low activity towards other plant cell wall polysaccharides [3,28]. The enzymes randomly hydrolyse β-1,4-linkages in diverse substrates such as pure mannans, galactomannans, glucomannans and galactoglucomannans . In this study, we found that B. licheniformis ManB shows the highest relative activity for glucomannan prepared from konjac followed by pure low-molecular mass 1,4-β-D-mannan of DP (degree of polymerization) < 15 and high-viscosity (high molecular mass) locust bean gum. However, we were not able to detect notable activity for guar gum and copra meal using the standard assay of 5-min incubation. Based on the kinetic characterization and judged from the specificity constant kcat/Km, the galactomannan locust bean gum (low viscosity) is the preferred substrate, however the differences in the specificity constant are not very pronounced when compared to konjac glucomannan and pure mannan. Apparently, B. licheniformis ManB prefers soluble and low-substituted mannan substrates. This is evident from a comparison of the relative activity on soluble LBG, a galactomannan from Ceratonia siliqua with a mannose-to-galactose ratio of 4:1, and soluble guar gum, a galactomannan from Cymopsis tetragonoloba with a mannose-to-galactose ratio of 2:1 . While the former is a good substrate, the activity on the latter is negligible during the 5-min standard assay. Similarly, activity on copra mannan, an insoluble galactomannan with a very low degree of galactosyl substitution, is very low .
There have been a number of reports on the characterization of mannan endo-1,4-β-mannosidases, both native and recombinant, from various organisms as summarized in Additional file 1. The pH and temperature optima as well as the stability of the enzymes are clearly varying, depending on the sources of the enzymes. Typically, the enzymes from non-bacterial sources show lower pH and temperature optima as well as lesser stability (See Additional file 1). The specific activity (from 3.8-8300 U/mg) and kinetic parameters (Km ranging from 0.3-10.2, Vmax from 3.8-2000) of the mannan endo-1,4-β-mannosidases from various sources, when using LBG as a substrate, vary greatly as shown in Additional file 1. This obviously reflects differences in the structure of the enzymes, for example highly thermostable mannan endo-1,4-β-mannosidase tend to have lower specific activity compared to their mesophilic counterparts [24,30,31]. In this respect, the B. licheniformis ManB described in our report is characterized by a very high specific activity of 1672 U/mg as well as by a relatively high stability. However, when comparing different mannan endo-1,4-β-mannosidases it is important to note that locust bean gum, which is a standard substrate for measuring mannan endo-1,4-β-mannosidase activity, is highly viscous and difficult to prepare. It can be assumed that the large discrepancy of enzyme activity in some of the reports can in part result from various techniques used in substrate preparation. For example we were not able to estimate with confidence the kinetic parameters when using high-viscosity, commercial LBG as a substrate. Thus, only the kinetic parameters when using low-viscosity LBG, low-viscosity glucomannan from konjac, and β-mannan are reported here.
TLC analysis of hydrolysis products confirmed that recombinant B. licheniformis mannanse is an endo-mannanase, which can efficiently and randomly cleave higher molecular weight mannans containing more than six mannose monomers. The enzyme could only cleaved mannopentaose after an extended incubation for 12 h and had no detectable activity against mannobiose, -triose or -tetraose. This property suggests that this enzyme could be applicable for the generation of prebiotic manno-oligosaccharides (MOS), as higher oligosaccharides formed will not be hydrolyzed further. Extensive hydrolysis of cheap and commercial available locust bean gum can therefore result in a mixture of MOS containing various oligosaccharides that may have a diverse prebiotic and anti-obesity  effects in different regions of the gut. Higher oligosaccharides are currently discussed as prebiotics with enhanced persistence that can reach more distal regions of the gut, and thus show their positive effect also in that region .
Our results demonstrate an efficient system for expression and secretion of a relatively thermo- and alkali-stable β-mannanase from B. licheniformis, which is suitable for industrial applications. In addition, the expression and secretion system that is used in this study could be adopted for production of other enzymes as well.
Bacillus licheniformis DSM13 (ATCC 14580) was obtained from DSMZ; German Culture Collection of Microorganisms and Cell Cultures (Braunschweig, Germany). Cells were grown at 37°C and kept in M1 medium. Escherichia coli DH5α (Life Technologies) was used in the molecular cloning experiments, whereas E. coli Top10 (Invitrogen) was used for expression of the recombinant enzyme. The E. coli strains were grown in Luria broth (LB) containing 100 μg/ml of ampicillin for maintaining the plasmid.
The gene of the mature mannan endo-1,4-β-mannosidase was cloned by a PCR-based method. The primers B.liManfwXhoI: CTG TGC CTC GAG CAC ACA CCG TTT CTC CGG TG, and B.liManrv6HiBgl2: CTG TGC AGA TCT TCA ATG GTG ATG GTG ATG GTG TTC CAC GAC AGG CGT CAA AGA ATC GCC were used for PCR amplification of manB. These primers were designed using the published sequence from the genomic database of B. licheniformis DSM13 (NCBI accession number. NC006322, REGION: 739316740398), and were compatible with the XhoI and BglII cloning sites of pFLAG-CTS expression vectors (Sigma). The DNA encoding native signal peptides were omitted, and the gene of the mature enzyme was fused with the E. coli OmpA signal peptide instead in order to enable efficient secretion into the periplasm and culture media. In addition, DNA encoding a hexahistidine tag was incorporated into the reverse primers to generate 6 × His tagged recombinant enzymes for further purification. PCR reactions were performed according to the recommendations from the manufacture in a thermal cycler from MJ Research. Templates were prepared by boiling a single colony of B. licheniformis in 100 μl of water for 5 min, and 50 μl of that solution were directly used in the PCR reaction. The PCR reaction (total volume of 100 μl) consisted of 0.5 μM of primers, 0.2 mM dNTP, 3 units of Pfu DNA polymerase (Promega), and 10 × reaction buffer, provided by the manufacturer. The amplifications were done as follows: initial DNA denaturation at 95°C for 2 min; 30 cycles of denaturation at 95°C for 45 sec, annealing at 58°C for 1 min, extension at 72°C for 2.5 min, and a final extension at 72°C for 10 min. The PCR products were separated on 1% agarose gels containing ethidium bromide and visualized under a UV transilluminator. PCR products were purified using PCR purification kits (Qiagen, Germany). The PCR products were then cut with appropriate restriction enzymes (XhoI and BglII) and ligated into the pFLAG-CTS expression vector that has been cut with corresponding enzymes. The ligation reactions were transformed into E. coli DH5α. The DNA sequence and the integrity of the constructs were determined by automated DNA sequencing (Macrogen, Korea).
Freshly transformed E. coli Top 10 harbouring the recombinant manB gene was inoculated into 5 ml of LB broth containing 100 μg/ml of ampicillin at 37°C for 16 h. After that, 1 ml of overnight culture was inoculated into 250-1000 ml of LB broth containing 100 μg/ml ampicillin and grown at 37°C until the optical density at 600 nm reached ~1.0 - 1.5. Then, IPTG was added into the culture broth to a final concentration of 0.1 - 1.0 mM. The culture was subsequently incubated with vigorous shaking (250 rpm) at 26-28°C (room temperature) for 3 - 4 h. The culture was collected and chilled in an icebox for 5 min and centrifuged at 2,000 × g for 10 min at 4°C to separate cells and supernatant. To extract the periplasmic content, the cells were resuspended in 2.5 ml of cold (4°C) spheroplast buffer [100 mM Tris-HCl, pH 8.0, 0.5 mM EDTA, 0.58 M sucrose, and 20 μg/ml phenylmethylsulfonyl fluoride (PMSF)]. After incubation for 5 min on ice, bacterial cells were collected by centrifugation at 8,000 × g at 4°C for 10 min and re-suspended in 1-2 ml of ice-cold sterile water supplemented with 1 mM MgCl2 and incubated on ice for 5 minutes with frequent shaking. The supernatant of approximately 1 - 2 ml was then collected by centrifugation at 8,000 × g at 4°C for 15 min as the periplasmic fraction. To extract the cell lysate, the precipitated cells from the previous step were washed once with lysis buffer (50 mM Tris-HCl + 0.5 mM EDTA), resuspended in 1 - 2 ml of lysis buffer, and sonicated (Ultrasonic Processor; 60 amplitude, pulser 6 sec, for 2 min) on ice. The cell debris was then spun down at 8,000 × g and the supernatant was collected as the cell lysate.
Immobilized metal affinity chromatography (IMAC) was used for purification of 6 × His-tagged recombinant β-mannanase by gravity-flow chromatography, using Ni-NTA Agarose according to the manufacturer protocol (Qiagen). The periplasmic extract was loaded onto a column and washed three times with increasing concentrations of imidazole of 5, 10 and 20 mM. The enzyme was then eluted by elution buffer containing 250 mM imidazole, and dialyzed using a dialysis membrane (Pierce Biotechnology, 10-kDa molecular-weight cutoff) to remove imidazole.
Denaturing sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE) was performed according to the method of Laemmli , in a 12% (w/v) polyacrylamide gel. The protein samples were briefly heated (3 min) in the loading buffer at 100°C using a heat block (Eppendorf). Protein bands were visualized by staining with Coomassie brilliant blue R-250. The molecular weight markers were from Biorad.
A zymogram of mannan endo-1,4-β-mannosidase activities was generated by an in-gel activity assay using 0.25% locust bean gum as substrate, copolymerized with 10% (w/v) polyacrylamide. The enzyme samples were mixed with the loading buffer in the absence of reducing agent, and then applied onto a polyacrylamide gel. After electrophoresis, the gel was soaked in 2.5% Triton X-100 for 30 min at 4°C, and incubated in sodium phosphate buffer pH 7.0 at 50°C for 1 h. The gel was then rinsed with de-mineralized water, stained with 0.1% Congo red solution and gentle shaking for 20 min prior to destaining with 1 M NaCl for 20-30 min, and thereafter was placed in 5% acetic acid for 3 min (optional). Mannan endo-1,4-β-mannosidase activity was detected as clear zones against red (after staining with Congo red) or blue background (after soaking in 5% acetic acid).
Protein concentration was determined by the method of Bradford  using bovine serum albumin as standard.
Standard mannan endo-1,4-β-mannosidase activity was assayed using the dinitrosalicylic acid (DNS) method . The substrate, 0.5% locust bean gum (Sigma), was dissolved in 50 mM sodium citrate buffer, pH 6.0 by homogenizing at 80°C, heated to the boiling point, cooled and stored overnight with continuous stirring. After that insoluble was removed by centrifugation. An appropriately diluted enzyme solution (0.1 ml) was incubated with 0.9 ml of the substrate solution at 50°C for exactly 5 min. The amount of reducing sugars liberated in the enzyme reaction was assayed by mixing 100 μl of the enzyme reaction with 100 μl DNS solution, heating at 100°C for 20 min, cooling on ice, and diluting with 300 μl of de-ionized water before measuring the absorbance at 540 nm. One unit of mannan endo-1,4-β-mannosidase activity is defined as the amount of enzyme that liberates 1 μmol of reducing sugar (using D-mannose as a standard) per minute under the experimental conditions given.
The optimal pH of mannan endo-1,4-β-mannosidase activity was measured between pH 2.0 - 12.0 under standard assay condition, using three buffer systems (each 50 mM): sodium acetate (pH 2.0 - 6.0), potassium phosphate (pH 6.0 - 9.0), and glycine (pH 9.0 - 12.0). To determine the pH stability of mannan endo-1,4-β-mannosidase, enzyme samples were incubated at various pH values using the same buffer systems as above at 50°C for 30 min or 24 h, and then the remaining enzyme activity was measured under standard assay condition.
The temperature dependence of mannan endo-1,4-β-mannosidase activity was measured by incubating the enzyme samples with the substrate at temperatures ranging from 4 - 100°C in 50 mM citrate buffer pH 6.0. Thermal stability of the enzyme was determined by incubating enzyme samples in 50 mM citrate buffer, pH 6.0, at various temperatures ranging from 4 - 80°C for 30 min, then the remaining enzyme activity was measured under standard assay condition. In addition, the thermal inactivation kinetics at 50 and 60°C were determined in 50 mM citrate buffer, pH 6.0, by measuring the residual enzyme activity at certain time points assayed under standard condition.
The relative activity of B. licheniformis mannan endo-1,4-β-mannosidase against konjac glucomannan, 1,4-β-D-mannan, locust bean gum, guar gum and copra meal was determined by pre-incubating 5 mg/ml of each substrate in 0.1 M phosphate buffer pH 7.0 at 50°C for 30 min with constant agitation using a Thermomixer comfort (Eppendorf AG, Hamburg, Germany). After adding the purified enzyme (276 ng), the reaction was incubated at 50°C with shaking for 5 min, and then terminated by boiling for 10 min. The release of reducing sugars was detected by the DNS method as described above. Relative mannan endo-1,4-β-mannosidase activities against various substrates were calculated by converting A540 to μmoles of mannose released.
For determination of the kinetic parameters, various concentrations of different substrates in 0.1 M phosphate buffer pH 7.0 [konjac glucomannan, low viscosity (3-19.5 mg/ml); 1,4-β-D-mannan (3-30 mg/ml); locust bean gum, low viscosity (3-39 mg/ml)] were incubated with the purified mannan endo-1,4-β-mannosidase (138 ng) at 50°C for 5 min. The Vmax and Km values were calculated by non-linear regression analysis, using the GraphPad Prism software (GraphPad Software Inc., San Diego, CA).
Mannose, konjac glucomannan (low viscosity) and 1,4-β-D-mannan (prepared by controlled hydrolysis of carob galactomannan, DP < 15) were purchased from Megazyme International (Bray, Ireland). Locust bean gum (LBG) was isolated from Ceratonia siliqua seeds (Sigma-Aldrich). Low-viscosity locust bean gum was prepared according to a previously published protocol . Guar gum was purchased from Sigma-Aldrich, while copra meal was bought from a local market in Nakhon Ratchasima province, Thailand.
Hydrolysis of 15 mM substrates (manno-oligosaccharides M2-M6), 0.1 mg LBG (high viscosity) and 0.1 mg of 1,4-β-D-mannan by mannan endo-1,4-β-mannosidase was carried out in a 30-μl reaction mixture, containing 0.1 M phosphate buffer, pH 7.0, and 13.8 ng (for M2 - M6), 276 ng (for LBG) or 2.76 μg (for 1,4-β-D-mannan) of purified enzyme. The reaction mixture was incubated at 50 °C with shaking for 2, 5, 10, 15, 30, 60 min, and 12 h prior to termination of the hydrolysis reaction by boiling for 5 min. A sample of each reaction mixture was applied five times (one μl each) to a silica TLC plate (6.0 × 10.0 cm), and then chromatographed twice (2 h each) using a mobile phase containing n-propanol: ethanol: water (7:1:2) (v/v), followed by spraying with 5% sulphuric acid and heating at 180°C for 3 min. A mixture of M1-M6 (5 nmol each) was used as standard. Manno-oligosaccharides (M2-M6), galacto-manno-oligosaccharides (OGM2 and OGM3), mannose and galactose were from Megazyme, and locust bean gum was from Sigma-Aldrich. Silicagel 60 F254 aluminum sheet, n-propanol and ethanol were purchased from Merck (Damstadt, Germany).
The authors declare that they have no competing interests.
CS performed amino acid sequence analysis, purified and analyzed the enzyme. BB expressed and characterized the enzyme properties. DH supervised enzyme characterization, co-designed experiments, evaluated the data, and edited the manuscript. MY conceived of the study, participated in cloning and expression of the enzymes, and wrote the manuscript. All authors read and approved the final manuscript.
Properties of various mannan endo-1,4-β-mannosidases; pdf format; A summary of properties of different mannan endo-1,4-β-mannosidases, i.e. Source, GH family, pH and temperature optima, yield, stability, specific activity, kinetic parameter using LBG as substrate, and reference [38-50].
This research was supported by ASEAN-EU University Network Programme (AUNP), National research council of Thailand (NRCT), and Suranaree University of Technology (SUT). We would like to thank Miss Suphap Emrat, Miss Sasithorn Lapboonrueng, and Miss Phakaimas Phitngam for excellent technical assistances.