Home | About | Journals | Submit | Contact Us | Français |

**|**PLoS Comput Biol**|**v.5(10); 2009 October**|**PMC2759076

Formats

Article sections

Authors

Related links

PLoS Comput Biol. 2009 October; 5(10): e1000540.

Published online 2009 October 23. doi: 10.1371/journal.pcbi.1000540

PMCID: PMC2759076

Christopher Rao, Editor^{}

University of Illinois at Urbana-Champaign, United States of America

* E-mail: ude.notecnirp@neergniw

Conceived and designed the experiments: YS. Performed the experiments: YS. Analyzed the data: TM HY YS NSW. Contributed reagents/materials/analysis tools: TM HY NSW. Wrote the paper: TM NSW. Conceived and analyzed model: TM HY NSW.

Received 2009 June 22; Accepted 2009 September 21.

Copyright Mora et al. This is an open-access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.

This article has been cited by other articles in PMC.

The bacterial flagellar motor is a highly efficient rotary machine used by many bacteria to propel themselves. It has recently been shown that at low speeds its rotation proceeds in steps. Here we propose a simple physical model, based on the storage of energy in protein springs, that accounts for this stepping behavior as a random walk in a tilted corrugated potential that combines torque and contact forces. We argue that the absolute angular position of the rotor is crucial for understanding step properties and show this hypothesis to be consistent with the available data, in particular the observation that backward steps are smaller on average than forward steps. We also predict a sublinear speed versus torque relationship for fixed load at low torque, and a peak in rotor diffusion as a function of torque. Our model provides a comprehensive framework for understanding and analyzing stepping behavior in the bacterial flagellar motor and proposes novel, testable predictions. More broadly, the storage of energy in protein springs by the flagellar motor may provide useful general insights into the design of highly efficient molecular machines.

Many species of bacteria swim to find food or to avoid toxins. Swimming motility depends on helical flagella that act as propellers. Each flagellum is driven by a rotary molecular engine–the bacterial flagellar motor–which draws its energy from an ion flux entering the cell. Despite much progress, the detailed mechanisms underlying the motor's extraordinary power output, as well as its near 100% efficiency, have yet to be understood. Surprisingly, recent experiments have shown that, at low speeds, the motor proceeds by small steps (~26 per rotation), providing new insight into motor operation. Here we show that a simple physical model can quantitatively account for this stepping behavior as well as the motor's near-perfect efficiency and many other known properties of the motor. In our model, torque is generated via protein-springs that pull on the rotor; the steps arise from contact forces between static components of the motor and a 26-fold periodic ring that forms part of the rotor. Our model allows us to explain some curious properties of the motor, including the observation that backward steps are shorter on average than forward steps, and to make novel, experimentally testable predictions on the motor's speed and diffusion properties.

Bacteria swim by virtue of tiny rotary motors that drive rotation of helical flagella. These motors are powered by a transmembrane proton (or ) flux which is converted into torque. However, little is known about the detailed mechanisms of energy conversion, or torque generation. Recently, a new result has provided direct insight into motor operation [1]: at low speeds, the bacterial flagellar motor proceeds by steps. This stepping is stochastic in nature, as manifested by the occurrence of occasional backward steps even for motors locked in one rotation direction. What is the origin of motor steps and how can these steps be reconciled with the near perfect efficiency of the motor observed at low speeds [2]? We argue that steps, including backward steps, are an inevitable consequence of the physical structure of the motor—a stator driving a “bumpy” rotor through a viscous medium.

In response to chemotactic signals, flagellar motors switch from counterclockwise to clockwise rotation causing cells to tumble or change directions. In *Escherichia coli*, the basic mechanism of torque generation appears to be the same for both directions of motor rotation [3]. Torque is generated by the passage of ions (or in some organisms ions) through the cytoplasmic membrane. As shown schematically in Fig. 1A, torque is applied to the rotor, including the flagellum, by the stator, which is comprised of independent torque-generating units (MotA/B complexes) anchored to the peptidoglycan cell wall. The exact number of torque-generating units can vary from motor to motor, with the maximum estimated to be at least 11 [4]. The rotor includes 26 circularly arrayed FliG proteins that contact the MotA/B complexes. The torque-speed relation of the motor has been measured under a range of conditions [5]–[8]. The maximum torque in the high load, low speed regime tracks the electrochemical potential difference or proton motive force (PMF) across the membrane, and the motor operates with nearly perfect efficiency [2]. Whereas torque and efficiency fall off at high speeds, proton flux and motor rotation are always strongly coupled with protons passing through the membrane per MotA/B unit per rotation [2].

Recent experiments, where rotation was measured by attaching a polystyrene bead to a flagellar stump driven by a counterclockwise-locked chimaeric motor at low speeds (low difference and low stator number), revealed that the motor proceeds by steps [1]. The steps have average size , which corresponds to 26 steps per rotation, exactly the number of copies of FliG around the rotor. Occasional backward steps are observed and, interestingly, these are smaller on average than forward steps ( versus ). These observations, as well as the stepping mechanism itself, have so far remained unexplained. It has been suggested that stepping is caused by the stochastic passage of ions. However, as pointed out in [1], the energy provided by passage of a single ion can only move the rotor attached to a polystyrene bead by , much less than the typical observed step size.

Here we propose a simple physical model to explain stepping: the stator applies nearly constant torque to the rotor, but, at the same time, contact forces on the rotor produce a potential and therefore an additional torque with approximately the 26-fold periodicity of FliG. Flagellar rotation is viewed as a circular random walk in a bumpy potential biased to favor rotation in a particular direction by the torque exerted by the stator elements. Our model naturally accounts for the existence of backward steps, as well as the discrepancy between forward and backward step sizes, and also predicts that step statistics depend on the absolute position of the rotor around the circle. Our predictions are found to be consistent with the available data, including angular diffusion of the motor [9], and suggest how steps could be used to study the physical structure of the motor. A novel testable prediction is that the torque-speed relation will become sublinear at very low torques.

Our model for stepping relies on two main assumptions: constant or nearly constant torque between stator and rotor and an approximately 26-fold periodic contact potential.

- All torque-generating units apply torque simultaneously and additively. Following the model of Meister
*et al.*[10], we assume that each MotA/B complex acts as a set of protein springs that reversibly store the energy available from (or ) translocations (see Fig. 1B). The protein springs are attached to fixed sites of the rotor circumference. When an passes through the membrane, it causes a spring to detach from its attachment site, stretch, and reattach to the next site. At stall, all springs are maximally stretched, such that the PMF matches the energy necessary to stretch a spring to its next site. At low speeds, the rotor moves and springs relax, but these are quickly restretched by passage, so that the system remains in quasi-equilibrium with the torque set by the PMF. Spring stretching may vary slightly among units, but since there are several motor units, we assume that the instantaneous torque self-averages and is nearly constant in time. Under this scenario, steps cannot be explained at the level of a single pair of MotA/B and FliG subunits, but must arise at the global level of the rotor-stator interaction. - There are contact forces between the stator and the rotor. These forces may be caused by contact between the MotA/B stator units and FliG proteins, but also possibly by contact with FliF (M-S ring), FlgH or FlgI proteins (distal rod, L, and P rings, respectively) each of which forms a circle of 26 copies. There may be other periodicities to the contact forces as well, arising from the filament and the hook, which are 11-fold periodic, from FlgK and FlgL (hook-filament junction, 11 copies each), FlgB, FlgC and FlgF (proximal rod between L and P rings, 6 copies each) and FliE (Rod-MS-ring junction, 9 copies). We assume that a 26-fold periodicity is dominant, in agreement with experimental observations. We therefore collect all contact forces in a potential which we suppose to be approximately 26-fold periodic (Figure 1C).

Since the motor operates at the molecular scale, its rotation is intrinsically stochastic as it is subject to random thermal fluctuations. Another potential source of noise is fluctuations of the torque applied by the individual MotA/B stators, due to the discrete nature of the proton flux. However, in presence of multiple independent stator units, this noise averages out and can be neglected. Under the combined influence of the applied torque, the contact potential, and thermal fluctuations the rotor performs a circular and continuous random walk in a tilted, approximately periodic potential, which we model by the following Langevin equation:

(1)

where is the drag coefficient, the total torque exerted via protein springs by the stators, and where the potential includes the torque, and the approximately 26-fold periodic contact potential:

(2)

The term represents Gaussian white noise and accounts for thermal fluctuations: , where is the rotor diffusion coefficient, related to the temperature and the drag coefficient via Einstein's relation: . In experiments, a load (usually a polystyrene bead) is attached to a flagellar stump and this load is largely responsible for the drag. For simplicity, we assume that linkage between motor and load is instantaneous, as the relaxation is rapid compared to the typical stepping time (see Discussion).

Numerical simulation of the model (Eq. 1) shows that rotation proceeds in steps (Fig. 1C). These steps correspond to jumps between adjacent wells of the tilted potential. Jumps/steps are possible thanks to thermal fluctuations which drive the system out of energy minima; without these fluctuations, the system would remain stuck in one well forever. Steps therefore correspond to crossings of the energy barriers separating wells. According to the Arrhenius law, the average time to cross a barrier increases exponentially with the barrier height. Because of the tilt induced by the torque, steps in the forward direction correspond to lower energy barriers than steps in the backward direction (*cf.* Fig. 1C). Forward steps are therefore more likely to occur than backward steps, so that on average the motor moves forward.

To further investigate stepping in our model, we wrote a step detector algorithm similar to that described in [1], and applied it to a simulation of rotations (see Materials and Methods). Fig. 2A shows the histogram of step sizes. As in the experiment, we find that backward steps are smaller on average than forward steps: the mean forward step is (), against for backward steps. (The precise values vary with the particular choice of potential and torque, but the mean step size is always larger for forward than backward steps.)

Recognizing steps as barrier crossing events allows us to readily explain the difference between average forward and backward steps sizes using a simple intuitive argument, as illustrated in the inset to Fig. 2A. Backward steps occur infrequently because the energy barriers for these steps are higher than for forward steps. By contrast, all forward steps must occur as the motor moves forward, regardless of the heights of energy barriers. In addition, as shown in the inset to Fig. 2A, barrier heights and step sizes tend to be positively correlated. Roughly speaking, we can assume that higher barriers extend over longer ranges. We confirmed the validity of this assumption by randomly generating many approximately 26-fold periodic potentials with a very general functional form (results shown in Fig. 3). Therefore, backward steps occur mostly over the lower barriers, and lower barriers correspond to smaller step sizes. This implies that backward steps are on average smaller than forward steps. Note that this argument relies on the fact that the barriers are not all identical.

To test the scenario proposed above, we asked whether the size of forward steps immediately preceding or following backward steps differ from the average of . According to our picture, the barrier crossed by these forward steps should be the same as the one crossed by the backward step immediately preceding or following, implying a small barrier and therefore a small forward step size. Fig. 2B–E shows that indeed forward steps preceding of following a backward step are smaller on average, in the experiment, in our simulation, than the mean forward step of . (Note that even for forward steps over the same barrier, backward steps are still slightly smaller on average in both experiment and simulation. This suggests that the step detection algorithm has a small systematic bias—see Materials and Methods.)

The difference between forward and backward step sizes relies on the 26 barriers around the circle not all being identical. These heterogeneities may exist because the potential is only approximately 26-fold periodic and contains other periodicities as well arising from the filament, hook, or other parts of the rotor. In any event, an essential prediction of our model is that step sizes and backward step frequencies will depend strongly on absolute position (*i.e.* modulo ), reflecting the fixed contact potential . We now examine how step frequencies and sizes depend on the properties of particular barriers, specified by the position of the rotor around the circle, and how this can tell us something about the detailed nature of contact forces.

According to our model, backward steps should be much more likely to occur at low barriers. In contrast, where forward steps occur should be much less sensitive to barrier heights. This follows simply because for each complete rotation the number of forward steps over any barrier is one plus the number of backward steps over that same barrier. Therefore, as long as backward steps are rare, the average number of forward steps over each barrier will be close to one per rotation and therefore the frequencies of forward steps will be similar for all barriers. This is illustrated in Fig. 4A, which presents average step frequencies for each of the 26 barriers of a particular potential (chosen to be the same as in Fig. 2), as calculated from first-passage theory (see Materials and Methods). As expected, there is considerable variation among barriers in backward-step frequencies, but much less variation in forward-step frequencies.

To relate average step sizes to absolute position, we examined the sizes of backward and forward steps for each of the barriers. To properly assign steps to barriers, we sorted steps into equal bins according to the angular position of the rotor when the step occurred, and calculated the average backward and forward step sizes in each bin. We applied this procedure to simulations of rotations generated with three different potentials (see Materials and Methods), and to four experimental traces, corresponding to four distinct cells, totaling 700 rotations [1]. According to our model, forward and backward steps across the same barrier should have the same average size. In the simulations (Fig. 4B), mean forward and backward steps across the same barrier were found to be linearly correlated, though with a systematic offset toward smaller backward steps. (As discussed above, this offset is likely the result of a bias in the step detection algorithm.) We found that mean forward and backward step sizes across the same barrier are also positively correlated in the experiment (Fig. 4D), in agreement with our prediction (with the same bias towards smaller backward steps). Overall, these results suggest that the absolute position of the rotor accounts for much of the variability observed in step size, and supports our model of a fixed, nearly periodic contact potential.

We next show that, both in the simulation and in the experiment, the barriers with a high frequency of backward steps are the same barriers where step sizes are short. To this end we plot the frequency ratio of backward steps to forward steps across each barrier versus the average forward step size (which we showed in Fig. 4B,D correlates with the backward step size), for both simulations (Fig. 4C) and experiment (Fig. 4E). In both cases backward-step frequencies fall off sharply with average forward step size.

Since barriers where steps are smaller have higher backward-step frequencies than other barriers, they contribute more to the average backward step size. Therefore, the mean backward step is smaller than , which would be the mean backward step size if all barriers contributed equally. In contrast, forward-step frequencies vary little from barrier to barrier, so that all barriers contribute more or less equally to the average forward step size, which is therefore approximately . This explains why backward steps are smaller than forward steps on average.

The recognition that steps are barrier-crossing events has a direct implication for how rotation speed depends on torque. In the absence of contact forces (*i.e.* ), the average rotation speed depends linearly on torque: . However, when the contact forces are comparable to the torque, rotation is hindered by barriers, and the system spends much of the time in local energy minima. Rotation is then not only limited by drag, but also by the rate of barrier crossing, leading to lower rotation speeds: . We computed analytically (see Materials and Methods) the torque-speed relation for loads with various drag coefficients for a perfectly 26-fold periodic sinusoidal potential with amplitude , as shown in Fig. 5A (using approximately 26-fold periodic potentials yielded qualitatively identical results). At high torques, the linear relation is recovered asymptotically, which follows because increasing torque decreases the barriers to forward rotation, and eventually eliminates them completely, as shown in the insets to Fig. 5A.

Fig. 5B shows the effect of the contact potential on the effective long-time diffusion coefficient . At low torques, diffusion is slowed down by barriers, while at high torques one recovers the natural diffusion coefficient . Interestingly, at intermediate torques rotor diffusion is actually enhanced by the contact potential. In this regime, the contact potential is a small but variable correction to the torque. This variability contributes to the variance of the rotation speed, thus effectively enhancing rotor diffusion (see Materials and Methods). At large torques, approaches asymptotically:

(3)

To check the consistency of the predicted diffusive behavior against previous results, we compared our model's prediction with experimental measurements of the variance in the rotation time [9],[11]. In [9], the rotation time of a tethered cell was measured. Simple diffusion predicts that the variance in rotation time per cycle is:

(4)

For a single fully-powered torque-generating unit, torque is estimated to be [7]. The measured speed in [9] was noisy and depended on the particular cell but was about for three torque-generating units, leading to an estimate for the drag coefficient , and for the diffusion constant . Thus the variance in cycle time for three torque-generating units predicted by simple diffusion is , which is consistent with the reported value of [9]. We conclude that it may not be necessary to consider other sources of fluctuations (*e.g.* proton translocations) to explain the observed variance in cycle time. Note that in these experiments the torque was high, and therefore contact forces are not expected to have had a significant effect on diffusion.

Our model also predicts a negative feedback reaction from the MotA/B protein springs that in principle could reduce diffusion. Namely, every time the rotor moves forward, the springs relax, causing a transient decrease of torque (and the opposite every time the motor moves backward). To estimate the magnitude of this effect, we model torque dynamics by linking spring elongation to rotor position, and by assuming that the springs “restretch” to their equilibrium position prescribed by the PMF with a characteristic relaxation time (see Materials and Methods). Within this model, the effective diffusion coefficient is found to be , where is the slope of the torque-speed relation of the motor near stall. The value of ranges from depending on the temperature [6] and is therefore much smaller than relevant values of the drag coefficient . We conclude that in the conditions of the discussed experiments, the effect of negative feedback from the springs on diffusion is negligible.

According to our model, the distribution of waiting times between steps is expected to be roughly exponential. The distribution of waiting times between steps (forward or backward) for an exactly 26-fold periodic potential is indeed exponential (Fig. 6A). When the potential is heterogeneous, the average waiting time depends on the barrier. Even though the distribution of waiting times across each barrier is exponential, the overall waiting-time distribution is not, appearing rather as a “stretched” exponential (Fig. 6B). The experimental distribution also resembles a stretched exponential (Fig. 6C).

Our model explains stepping of the bacterial flagellar motor by interpreting its rotation as a viscously damped random walk driven by a constant torque and by a heterogeneous contact potential caused by the physical irregularities of the rotor. In this picture, steps are recognized as barrier-crossing events between adjacent minima of a tilted and corrugated energy potential. Corrugations are caused by contact between the stators and the protein arrays (FliG, among others) making up the rotor structure. Recently a more accurate picture of this structure has emerged, thanks notably to electron microscopy studies [12].

Our model predicts a periodicity of the potential, so that the absolute angular position of the rotor with respect to the stator is an underlying determinant for step statistics, and this prediction is found to be consistent with the available experimental data. In particular, our model offers an explanation for the experimental observation that backward steps are smaller than forward steps on average.

Another prediction of the model is that rotor speed grows sublinearly as a function of torque. At low torques rotation is slow because of trapping in local minima, whereas at high torques the barriers between minima are lowered and eventually eliminated. Additionally, we predict that at low torques rotor diffusion is hindered by barriers, while at high torques the variability of the potential actually enhances diffusion. Although in principle other sources of fluctuations, such as ion translocation, could impact rotor diffusion, we showed that in the relevant regimes simple diffusion can account for nearly all of the observed variance in cycle time [9]. In order to verify these predictions experimentally, one would need to simultaneously measure the rotor speed and the proton (or ) motive force, believed to be proportional to torque at low speeds, in the regime where torque and contact forces are comparable. (Note that in the stepping data [1] we have analyzed, torque could vary during the course of the experiment as the result of changes in the number of stator units.) Interestingly, both a stepping behavior and a sublinear speed *vs.* torque relationship were reported in experiments on flagellar motors in Streptococcus [13]. Cells were starved, and then energized or de-energized to control PMF. Motion was found to have a rotational symmetry of , which corresponds to one revolution of the one-start helix of an axial component (11 in two revolutions). When energized (increasing PMF), cells displayed a sublinear speed *vs.* PMF dependence in agreement with our prediction. However, when cells were de-energized (decreasing PMF), this relation became linear. Such history dependence could occur if the stator elements hindering rotation are pushed away as PMF increases, leaving rotation unhindered during PMF decrease.

Our model is consistent with other experimental results on the bacterial flagellar motor. Because the model relies on the assumption that the energy from ion translocation is reversibly stored in protein springs [10], it implies a near-perfect efficiency of the motor at low torques [2]. The same mechanism can account for both clockwise and counterclockwise motor rotation [3]—these two cases simply corresponding to the springs being stretched in opposite directions. If the contact potential stays the same when the motor changes direction, our model predicts that backward steps will occur preferentially at the same absolute angles irrespectively of the direction of rotation. The observation that the duty ratio is very close to one even with a single torque-generating unit [7],[14] can be encompassed in our model by assuming that each torque-generating unit comprises at least two springs. The advantage of a spring mechanism over other mechanisms is that it naturally entails efficiency, at least at lower speeds. When the system is in thermodynamic equilibrium, which is the case near stall where kinetic rates are much faster than spring relaxation, the average energy provided to the springs by the passage of one proton is *exactly* equal to the potential energy difference between the exterior and the interior of the cell. This is simply a consequence of reversibility. The key point is that all the energy stored in protein springs is eventually used to move the rotor. This stands in contrast to mechanisms driven by irreversible conformational changes, where some energy is typically wasted because the energy required for the conformational change is less than the energy provided by the source, e.g. ATP hydrolysis for myosin motors. The utilization of springs for the reversible storage of the energy suggests a general mechanism underlying the operation of high-efficiency molecular machines.

Our study has focused on the adiabatic regime, where springs are near equilibrium with respect to the PMF, as this is the relevant regime for the stepping experiments. However, our model predicts that when the proton flux becomes kinetically limited, the springs will fail to restretch completely, causing the torque to drop. This observation can explain the observed “knee” in the motor's torque-speed relationship [5], when coupled to an explicit model of proton translocation [15].

In our analysis we have neglected one effect that is not crucial for our analysis, but which may prove important for inferring the detailed nature of the contact potential. Specifically, we have assumed that equilibration of the elastic linkage between the motor and the load is rapid compared to the waiting time between steps. For a torsion constant [16],[17] between the rotor and the load, and a drag coefficient , the relaxation time is . In contrast, the typical waiting time between steps ranges from , depending on experimental conditions. If the elastic linkage was too soft, the polystyrene bead would respond to the motion of the rotor with a delay , and steps would be smoothed out. This does not seem to occur in the experiment.

Another effect, which we have considered (see Rotor diffusion) but did not include in our simulations, is the relaxation of MotA/B protein springs as a rotor step occurs. For example, when the rotor moves forward, the torque decreases because the protein springs relax. Usually these springs are restretched so quickly by ion translocation that the transient decrease of torque can be neglected. However, during a barrier crossing event the rotor motion might be so fast that protons are not able keep up. This would result in a temporary drop in torque and make barrier crossing more difficult. A similar argument applies to backward steps. We have already shown that at the “mean-field” level, where rotation speed and ion flux are time-averaged, this negative feedback has only a small effect. However, the instantaneous rotation speed during a step can be much larger than its average. How fast can a proton translocate through the motor? The maximum flux of protons through a single motor unit can be estimated by considering the maximum rotation speed before the torque starts dropping (the “knee” of the torque-speed relationship [5]). For a single motor unit in natural conditions, this speed is about 150 Hz for a torque of [7]. The power generated by the motor is then . Each proton provides at most , so that the number of protons per second is at least . The timescale of proton passage is therefore less than . A single rotor step corresponds to the passage of [1], so restretching the protein springs should take less than , which is below the current experimental time resolution. For comparison, an instanton calculation [18] reveals that the typical time for crossing a barrier is bounded from below by (for , and ).

In our analysis we have also neglected the effect of the “shot noise” arising from the discrete nature of the proton flux. This shot noise leads to fluctuations in torque, which could in principle affect the stepping behavior as well as the rotor diffusivity. While we have neglected this source of noise on the basis that it is averaged out by the presence of multiple stators, its influence can be significant at very low loads [15].

Other molecular motors have shown stepping behavior, including the actin-myosin motor [19], the dynein-microtubule motor [20], and kinesin [21]. In these ATP-powered motors, which are less powerful than the bacterial flagellar motor by orders of magnitude, stepping is a built-in and essential part of motor operation. By contrast, we have argued that in the bacterial flagellar motor the observed stepping arises solely from steric hindrance.

Our work leaves open a number of questions. It would be interesting to infer the precise form of the contact potential from rotation data and see how and whether it varies in time and among motors, potentially yielding new insight into the dynamics of motor assembly and reorganization. To this end a more sophisticated approach to learning the potential may be required, *e.g.* employing maximum likelihood techniques. Lastly, one still needs to understand the mechanism of torque generation, including the role played by the discreteness of ion translocation, the chemical nature of protein springs and their attachment sites, as well as the energy conversion process.

All the experimental data presented in this paper is from [1] and were used with the kind permission of Richard Berry. The simulation data were obtained by numerical integration of Eq. 1 by Euler's method.

The same step finding algorithm as the one described in [1] was used on both simulation data and experimental data to extract steps. First, an entire episode (angular position *vs.* time) was fitted by a single step function, and thus divided into two intervals. This procedure was repeated iteratively times—at each iteration the interval for which the data had the largest range of angles was replaced by a best-fit step function. Then, a quality factor was calculated for each assigned step, where () is the angular position left (right) of the step, and () is the number of data points on the left (right) of the step. Finally, steps with a low quality factor were removed and their adjacent intervals merged until all steps have a quality factor greater than .

This step finding algorithm introduces a small bias that tends to underestimate the sizes of backward steps. For each interval, the algorithm finds the mean value of the angular position in this interval. But steps do not occur instantaneously, and the data points leading from one interval to the other are themselves included in the interval means. As a result, these means are biased toward where the rotor is coming from and where it is going. When the rotor is stepping forward, these two biases tend to cancel each other. However, when the rotor steps backward, these steps are usually both preceded and followed by forward steps. Thus, the interval before the backward step is biased toward lower angular positions, and the interval after the backward step is biased toward higher positions. As a result, the biases reinforce each other such that backward steps are estimated to be smaller than forward steps. We have checked that even on a perfectly 26-fold periodic potential , with and a torque , the most probable forward step size according to the algorithm was , which is correct, while the most probable backward step size was , which is to small.

The step frequencies presented in Fig. 4A were obtained analytically using first-passage theory [22],[23]: Label the wells , and denote the local minima of by . Consider three consecutive wells centered at , and respectively. Starting at , call the probability of first jumping forward and the probability of first jumping backward. These probabilities are given by:

(5)

Given the transition probabilities and , we write a master equation for the probability of the rotor being in well after steps.

(6)

At large a stationary state is reached, and satisfies the conservation equation:

(7)

The step frequencies presented in Fig. 4 are then given by and . (Note that the step frequencies sum to one, .)

The torque-speed relation shown in Fig. 5A was also estimated using first-passage theory. For simplicity we assumed a perfectly 26-fold periodic potential, but the results are qualitatively the same when the periodicity is only approximate. The average time to move from one minimum of the potential to the next is given by:

(8)

where and is the torque. This yields a rotation speed:

(9)

where and are obtained from Eq. 12. The asymptotic expansion of Eq. 9 for yields

(10)

The effective diffusion coefficient shown in Fig. 5B is estimated using similar techniques (*cf.* [22],[23] and Materials and Methods).

The effective diffusion coefficient is estimated using the techniques of first-passage theory [22]. For an exactly 26-fold periodic potential, this effective diffusion coefficient is given by [23]:

(11)

where is the step size. and are the probabilities of first jumping forward or backward, respectively, and are given by:

(12)

is the time before a step occurs (forward or backward). Its first two moments are:

(13)

(14)

with

(15)

Expanding Eq. 11 for large torques gives:

(16)

To estimate the magnitude of the negative feedback of the MotA/B protein springs on diffusion, we model the dynamics of rotor angle and torque by the following mean-field differential equations:

(17)

(18)

The first equation is the same as Eq. 1 but with a variable torque and without contact forces. In the second equation, torque is assumed to follow the stretching/unstretching of the springs with rotation, and therefore the rate of change of torque is linearly related to the rate of change of rotor angle through an effective spring constant (second term of r.h.s. of Eq. 18). At the same time, due to the restretching of springs upon proton passage, torque relaxes toward its equilibrium value (first term of r.h.s. of Eq. 18). Solving the second equation for steady-state rotation yields the torque-speed relationship for the motor: , with . Solving both equations for the effective diffusion coefficient in the limit , we find .

We recorded the distribution of waiting times obtained by the step-finding algorithm, both for the simulation and for the experiment. For the simulation, in the case of a perfectly 26-fold periodic potential (Fig. 6A), there is only one type of barrier, and the waiting-time distribution is approximately exponential. When the potential is only approximately 26-fold periodic (Fig. 6B), the waiting-time distribution is the sum of 26 exponentials, and resembles a stretched exponential. The waiting-time distribution for the experiment (one cell, Fig. 6C) is consistent with a sum of exponentials. The stretched appearance of the experimental distribution may be due to non-uniform barriers, as predicted by our model, but may also be due in part to the observed variability in average speed, presumably due to changes in torque, during the course of the experiment.

For all numerical simulations and analytic calculations the potential was chosen to be of the form:

(19)

Experimentally, there is evidence for components of the contact potential with fold periodicity (see Ref. [1], Fig. 3b). Except where stated otherwise, we used , and . In Fig. 2 and and4A,4A, we used . In Fig. 4B and 4C we chose three sets of values for , , and , in units of : (), () and (). In Fig. 5, the torque-speed relation and rotor diffusion were calculated with .

We thank Richard Berry, Avigdor Eldar, Yigal Meir, Teuta Pilizota, Anirvan Sengupta, and Aleksandra Walczak for helpful suggestions.

The authors have declared that no competing interests exist.

TM was supported by a Human Frontier Science Program (www.hfsp.org) fellowship, and NSW was supported by the National Institutes of Health (www.nih.gov) Grant R01 GM082938. The funders had no role in study design, data collection and analysis, decision to publish, or preparation of the manuscript.

1. Sowa Y, Rowe AD, Leake MC, Yakushi T, Homma M, et al. Direct observation of steps in rotation of the bacterial flagellar motor. Nature. 2005;437:916–919. [PubMed]

2. Meister M, Lowe G, Berg HC. The proton flux through the bacterial flagellar motor. Cell. 1987;49:643–50. [PubMed]

3. Blair DF, Berg HC. Restoration of torque in defective flagellar motors. Science. 1988;242:1678–1681. [PubMed]

4. Reid S, Leake M, Chandler J, Lo C, Armitage J, et al. The maximum number of torque-generating units in the flagellar motor of *Escherichia coli* is at least 11. P Natl Acad Sci Usa. 2006;103:8066–8071. [PubMed]

5. Berg HC. Torque generation by the flagellar rotary motor. Biophys J. 1995;68:163S–166S; discussion 166S–167S. [PubMed]

6. Chen X, Berg H. Torque-speed relationship of the flagellar rotary motor of *Escherichia coli*. Biophys J. 2000;78:1036–1041. [PubMed]

7. Ryu WS, Berry RM, Berg HC. Torque-generating units of the flagellar motor of *Escherichia coli* have a high duty ratio. Nature. 2000;403:444–7. [PubMed]

8. Inoue Y, Lo C, Fukuoka H, Takahashi H, Sowa Y, et al. Torque–speed relationships of Na^{+}-driven chimeric flagellar motors in *Escherichia coli*. Journal of Molecular Biology. 2008;376:1251–1259. [PubMed]

9. Samuel AD, Berg HC. Torque-generating units of the bacterial flagellar motor step independently. Biophys J. 1996;71:918–23. [PubMed]

10. Meister M, Caplan SR, Berg HC. Dynamics of a tightly coupled mechanism for flagellar rotation. bacterial motility, chemiosmotic coupling, protonmotive force. Biophys J. 1989;55:905–14. [PubMed]

11. Samuel AD, Berg HC. Fluctuation analysis of rotational speeds of the bacterial flagellar motor. Proc Natl Acad Sci USA. 1995;92:3502–6. [PubMed]

12. Thomas DR, Francis NR, Xu C, Derosier DJ. The three-dimensional structure of the flagellar rotor from a clockwise-locked mutant of *Salmonella enterica* Serovar Typhimurium. Journal of Bacteriology. 2006;188:7039–7048. [PMC free article] [PubMed]

13. Khan S, Meister M, Berg HC. Constraints on flagellar rotation. J Mol Biol. 1985;184:645–56. [PubMed]

14. Yuan J, Berg HC. Resurrection of the flagellar rotary motor near zero load. P Natl Acad Sci Usa. 2008;105:1182–1185. [PubMed]

15. Mora T, Yu H, Wingreen NS. Modeling torque versus speed, shot noise, and rotational diffusion of the bacterial flagellar motor. To be published 2009 [PMC free article] [PubMed]

16. Block S, Blair D, Berg H. Compliance of bacterial flagella measured with optical tweezers. Nature. 1989;338:514–518. [PubMed]

17. Block SM, Blair DF, Berg HC. Compliance of bacterial polyhooks measured with optical tweezers. Cytometry. 1991;12:492–6. [PubMed]

18. Wentzel AD, Friedlin MI. Random Perturbations of Dynamical Systems. New York: Springer; 1998.

19. Finer JT, Simmons RM, Spudich JA. Single myosin molecule mechanics: piconewton forces and nanometre steps. Nature. 1994;368:113–9. [PubMed]

20. Mallik R, Carter BC, Lex SA, King SJ, Gross SP. Cytoplasmic dynein functions as a gear in response to load. Nature. 2004;427:649–652. [PubMed]

21. Asbury CL, Fehr AN, Block SM. Kinesin moves by an asymmetric hand-over-hand mechanism. Science. 2003;302:2130–2134. [PMC free article] [PubMed]

22. Gardiner CW. Handbook of Stochastic Methods: for Physics, Chemistry and the Natural Sciences (Springer Series in Synergetics) Springer, 3rd ed. edition; 2004.

23. Lindner B, Kostur M, Schimansky-Geier L. Optimal diffusive transport in a tilted periodic potential. Fluct Noise Lett. 2001;1:R25–R39.

Articles from PLoS Computational Biology are provided here courtesy of **Public Library of Science**

PubMed Central Canada is a service of the Canadian Institutes of Health Research (CIHR) working in partnership with the National Research Council's national science library in cooperation with the National Center for Biotechnology Information at the U.S. National Library of Medicine(NCBI/NLM). It includes content provided to the PubMed Central International archive by participating publishers. |